Bedienungsanleitung Lenco SCR-1000 (Seite 3 von 6) (Englisch)

477365

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

4 5

MUTE THE UNIT

During playback, press MUTE button to switch off the audio. Press the button again to resume the

audio.

TREBLE/BASS EFFECT ADJUSTING

During playback, press the TONE button on the unit repeatedly and adjust the effect of treble or bass

via pressing VOL+/- button on the unit continuously. The effect of the treble and bass also could be

adjusted by pressing TREBLE+/- button or BASS+/- button directly.

VOLUME LEVEL

During playback, press VOL+/- button to adjust the volume level accordingly.

CHECK THE CURRENT TIME

At TAPE, AUX and FM radio modes, Press DISPLAY button on the remote to check the current time.

SLEEP FUNCTION

Press SLEEP button at power on mode. Each time SLEEP button is pressed, the sleep time changes on

the display. When your desired sleep time shows on the screen, release the SLEEP button. When the

sleep time is expired, the unit will switch off automatically.

CLOCK SETTING

1. At standby mode, press CLOCK button and use HR/MIN/SLEEP button on the unit or press HR

button on the remote to switch between the time modes (12 hours and 24 hours) accordingly. Then

press CLOCK Button to confirm your selection.

2. The hour flashes on the screen. Press HR/MIN/SLEEP button on the unit repeatedly to set the hour

and press CLOCK Button to confirm.

3. The minute flashes on the screen. Set the minute by using HR/MIN/SLEEP button on the unit

repeatedly, confirm your setting by pressing CLOCK Button.

Note: When the hour flashes on the screen, the clock also could be set by pressing HR button and MIN

button on the remote directly. After setting, press CLOCK button to confirm.

TIMER SETTING

1. At standby mode, press TIMER button on the unit or on the remote.

2. The hour flashes on the screen with "T". Adjust the hour by using HR/MIN/SLEEP button on the unit

continuously and press TIMER Button to confirm.

3. The minute flashes on the screen. Set the minute by using HR/MIN/SLEEP button on the unit

continuously. Confirm your setting by pressing TIMER Button. The timer “ON” shows on the screen to

indicate the timer is activated (Press TIMER button again to disable the timer)

Note: When the hour flashes, the time also could be set by pressing HR button and MIN button on the

remote directly. After setting, press TIMER button to confirm

4. Press FUNCTION button on the unit repeatedly or use CD, FM, USB and card buttons on the remote

to set the timer modes among disc, radio, USB and card modes. The unit will be turned on at your

selected mode at the time you set for the timer.

FM RADIO

TUNING THE FM RADIO

1. Press STANDBY button to turn the unit on.

2. Press FUNCTION button on the unit repeatedly or press FM button on the remote to switch the unit to

TUNER(radio) mode.

3. Press TUNE+/- button to fine tune the radio station. Press and hold TUNE+/- button to automatically

tune the radio frequency forward and backward respectively. When an available station is found, the

unit will broadcast it immediately.

4. Press ST/MO button on the remote to switch the radio between FM(MONO) and FM(STEREO).

SAVING FM RADIO STATIONS TO THE UNIT'S MEMORY

1. After tuning the FM radio to the desired stations, press MEM button, a number of a memory cell

flashes on the screen.

2. Press CH+/ CH- button to select the radio memory cell.

3. Press MEM button again to save the current radio station to the selected memory cell.

4. To recall the preset station frequency, press CH+ or CH- button repeatedly.

HANDLING AND MAINTENANCE OF A DISC

Follow the instructions below to handle and maintain your disc in order

that long time and trouble free performance can possibly be obtained:



Ensure not to caress the rain bow side of the disc; handle the disc by

the edge.



Long time exposure to sunshine, high temperatures and humidity will

damage the disc. And keep storage area clean.



Avoid sticking labels on both sides of a disc. Writing with pointed

articles on the disc should be strictly avoided.



Clean the disc wiping the centre and then working out to the edge with

a dry & soft cloth or a disc brush. Avoid any cleansing lotion or

chemical eradicator.



Store them in their cases when they are not to be used.

LOAD A DISC

1. Open the CD door by pressing CD Door Open/Clear area.

2. Load a disc on the disc tray with the label side facing up.

3. Close the CD door.

PLAY A DISC

1. Press the FUNCTION button on the unit repeatedly or press CD button on the remote to switch the

unit to CD mode. "READING" shows on the screen to indicate at CD mode.

2. Follow the instructions above to load a disc.

3. When the disc is read successfully, total number of tracks and the total playtime shows in the LCD

and playback starts from the first track.

4. Press Play/Pause button once to halt music playback, the elapsed time of the current track flashes to

indicate the player in Pause mode; press Stop button to cease music playback, the LCD shows the

total number of the tracks and the total playtime.

5. During playback, press DISPLAY button repeatedly to check the play information of the disc (the

remain of the current track, the elapsed time of the disc and the remain of the disc).

HANDLE DISC ONLY AS SHOWN

CLEAN FROM CENTER TO EDGE

DO NOT STORE NEAR HEAT

To AUX IN jack

To PHONES jack on MP3 player /

UDIO OUT jack on audio device

Lenco SCR-1000 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lenco SCR-1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info