A-5
PREPARATION
10 c m
A
The TV can be installed in various ways such as on a wall, or on a desktop etc.
A
The TV is designed to be mounted horizontally.
Power Supply
Circuit breaker
EARTHING
Ensure that you connect the earth wire to prevent possible electric
shock. If grounding methods are not possible, have a qualified
electrician install a separate circuit breaker.
Do not try to earth the TV by connecting it to telephone wires,
lightening rods or gas pipes.
WALL MOUNT: HORIZONTAL INSTALLATION
10 c m
10 c m
10 c m
NOTE
G Do not store the product in high temperature
(60 °C or above) or in low temperature (-20 °C
or below). This can deteriorate the water resis-
tant function.
G Do not put the product in the water or directly
pour water on the product. It can cause problem
or deformation to the product.
G Should Install wall mount on a solid wall perpen-
dicular to the floor.
G Should use a special wall mount, if you want to
install it to ceiling or slanted wall.
G The surface that wall mount is to be mounted on
should be of sufficient strength to support the
weight of TV set; e.g. concrete, natural rock,
brick and hollow block.
G LG is not liable for any accidents or damage to
property or TV due to incorrect installation:
- Incorrect fastening of screws to surface which
may cause TV to fall and cause personal injury.
- Not following the recommended Installation
method.
1
After checking the wall material, fixate the wall
mount bracket with the screw provided for correct
purpose at the location you want. At this time,
check the front and rear side of the bracket and
fixate the unit so that the front side is visible.
2
After hanging the TV support to the bracket for
wall mount as shown in the picture, press it in the
arrow direction.
Screw Secure Location
Front Back
For adequate ventilation allow a clearance of 10 cm all
around the TV.
IInnssttaallllaattiioonn mmeetthhoodd
