Zoom out
Zoom in
Vorherige Seite
1/30
Nächste Seite
ENGLISH
LG Room
Air Conditioner
OWNER'S MANUAL
LG
MODELS: SP1 Chassis
IMPORTANT
• Please read this owner's manual carefully and thoroughly
before installing and operating your room air conditioner.
• Please retain this owner's manual for future reference after
reading it thoroughly.
Prior to installation, this air-
conditioning unit must be
submitted for approval by the
utility service which provides
electricity (EN 61000-2,
EN 61000-3 Norm).
website http://www.lgservice.com
ITALIANO ESPAÑOL FRANÇAIS DEUTSCH GREEK
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    website http://www.lgservice.com

    ITALIANO

    LG Room
    Air Conditioner
    OWNER'S MANUAL
    MODELS: SP1 Chassis

    ENGLISH

    LG

    ESPAÑOL

    Prior to installation, this airconditioning unit must be
    submitted for approval by the
    utility service which provides
    electricity (EN 61000-2,
    EN 61000-3 Norm).

    FRANÇAIS
    DEUTSCH
    • Please read this owner's manual carefully and thoroughly
    before installing and operating your room air conditioner.
    • Please retain this owner's manual for future reference after
    reading it thoroughly.

    GREEK

    IMPORTANT



  • Page 2

    Room Air Conditioner Owner’s Manual

    TABLE OF CONTENTS
    Safety Precautions.........................3

    FOR YOUR RECORDS
    Write the model and serial numbers here:
    Model #

    Prior to Operation ..........................8

    Serial #
    You can find them on a label on the side of each unit.
    Dealer's Name

    Introduction ....................................9

    Electrical Safety ...........................10

    Operating Instructions.................12

    Maintenance and Service ............26

    Date Purchased
    ■ Staple your receipt to this page in the event you need
    it to prove date of purchase or for warranty issues.

    READ THIS MANUAL
    Inside you will find many helpful hints on how to use
    and maintain your air conditioner properly. Just a little
    preventive care on your part can save you a great deal
    of time and money over the life of your air conditioner.
    You'll find many answers to common problems in the
    chart of troubleshooting tips. If you review our chart of
    Troubleshooting Tips first, you may not need to call
    for service at all.

    PRECAUTION
    • Contact the authorized service technician for
    repair or maintenance of this unit.
    • Contact the installer for installation of this unit.
    • The air conditioner is not intended for use by
    young children or invalids without supervision.
    • Young children should be supervised to ensure
    that they do not play with the air conditioner.
    • When the power cord is to be replaced,
    replacement work shall be performed by
    authorized personnel only using only genuine
    replacement parts.
    • Installation work must be performed in
    accordance with the National Electric Code by
    qualified and authorized personnel only.

    2 Room Air Conditioner



  • Page 3

    Safety Precautions

    Safety Precautions

    This symbol indicates the possibility of death or serious injury.
    This symbol indicates the possibility of injury or damage to properties only.
    ■ The meanings of the symbols used in this manual are as shown below.

    Be sure not to do.
    Be sure to follow the instruction.

    ■ Installation
    Always perform grounding.
    • Otherwise, it may cause electrical shock.

    For installation of the product, always
    contact the service center or a professional
    installation agency.
    • Otherwise, it may cause a fire, electrical shock,
    explosion or injury.

    Don’t use a power cord, a plug or a loose
    socket which is damaged.
    • Otherwise, it may cause a fire or electrical shock.

    Securely attach the electrical part cover to
    the indoor unit and the service panel to the
    outdoor unit.
    • If the electrical part cover of the indoor unit and
    the service panel of the outdoor unit are not
    attached securely, it could result in a fire or
    electric shock due to dust, water, etc.

    Owner's Manual 3

    ENGLISH

    To prevent the injury of the user or other people and property damage, the following instructions must be
    followed.
    ■ Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified
    by the following indications.



  • Page 4

    Safety Precautions

    Always install an air leakage
    breaker and a dedicated
    switching board.
    • No installation may cause a fire
    and electrical shock.

    Do not keep or use
    flammable gases or
    combustibles near the air
    conditioner.
    • Otherwise, it may cause a fire
    or the failure of product.

    Ensure that an installation
    frame of the outdoor unit is
    not damaged due to use for
    a long time.
    • It may cause injury or an
    accident.

    x
    Wa Thinner

    Do not disassemble or
    repair the product
    randomly.
    • It will cause a fire or electrical
    shock.

    Do not install the product at
    a place that ther is concern
    of falling down.
    • Otherwise, it may result in
    personal injury.

    Use caution when
    unpacking and installing.
    • Sharp edges may cause injury.

    ■ Operation
    Do not share the outlet with
    other appliances.

    Do not use the damaged
    power cord.

    • It will cause an electric shock or
    a fire due to heat generation.

    • Otherwise, it may cause a fire
    or electrical shock.

    Take care so that the power
    cord may not be pulled
    during operation.

    Unplug the unit if strange
    sounds, smell, or smoke
    comes from it.

    • Otherwise, it may cause a fire
    or electrical shock.

    4 Room Air Conditioner

    • Otherwise, it may cause
    electrical shock or a fire.

    Do not modify or extend the
    power cord randomly.
    • Otherwise, it may cause a fire
    or electrical shock.

    Keep the flames away.

    • Otherwise, it may cause a fire.



  • Page 5

    Safety Precautions

    Take the power plug out if
    necessary, holding the head
    of the plug and do not touch
    it with wet hands.

    Do not use the power cord
    near the heating tools.

    • Otherwise, it may cause a fire
    and electrical shock.

    Do not allow water to run
    into electrical parts.

    Hold the plug by the head
    when taking it out.

    • Otherwise, it may cause the
    failure of machine or electrical
    shock.

    • It may cause electric shock and
    damage.

    Ventilate the room well
    when using this appliance
    together with a stove, etc.

    When cleaning the unit, first
    make sure the power and
    breaker are turned off.

    • An oxygen shortage may occur.

    • Otherwise, it may cause
    electrical shock.

    • Otherwise, it may electrical
    shock and failure.

    Never touch the metal parts
    of the unit when removing
    the filter.
    • They are sharp and may cause
    injury.

    Turn off the main power
    switch when not using the
    product for a long time.
    • Otherwise, it may cause the
    failure of product or a fire.

    Do not step on the indoor/outdoor unit and
    do not put anything on it.

    Do not place a heavy object on the power
    cord.

    • It may cause an injury through dropping of the unit
    or falling down.

    • Otherwise, it may cause a fire or electrical shock.

    Owner's Manual 5

    ENGLISH

    • Otherwise, it may cause a fire
    or electrical shock.

    Do not open the suction
    inlet of the indoor/outdoor
    unit during operation.



  • Page 6

    Safety Precautions

    When the product is submerged into water,
    always contact the service center.

    Take care so that children may not step on
    the outdoor unit.

    • Otherwise, it may cause a fire or electrical shock.

    • Otherwise, children may be seriously injured due
    to falling down.

    ■ Installation
    Install the drain hose to ensure that drain
    can be securely done.
    • Otherwise, it may cause water leakage.

    Always inspect gas leakage after the
    installation and repair of product.
    • Otherwise, it may cause the failure of product.

    6 Room Air Conditioner

    Install the product so that the noise or hot
    wind from the outdoor unit may not cause
    any damage to the neighbors.
    • Otherwise, it may cause dispute with the
    neighbors.

    Keep level parallel in installing the product.
    • Otherwise, it may cause vibration or water
    leakage.



  • Page 7

    Safety Precautions

    ■ Operation

    • Otherwise, it may do harm to
    your health.

    Use a soft cloth to clean. Do
    not use wax, thinner, or a
    strong detergent.
    • The appearance of the air
    conditioner may deteriorate,
    change color, or develop
    surface flaws.

    When gas leaks, open the
    window for ventilation
    before operating the unit.
    • Otherwise, it may cause
    explosion, and a fire.

    x
    Wa Thinner
    Do not use an appliance for
    special purposes such as
    preserving animals
    vegetables, precision
    machine, or art articles.
    • Otherwise, it may damage your
    properties.

    Do not place obstacles
    around the flow inlet or
    outlet.

    • Otherwise, it may cause the
    failure of appliance or an
    accident.

    Do not insert the hands or bars through the
    air inlet or outlet during operation.
    • Otherwise, it may cause personal injury.

    Always insert the filter
    securely. Clean it every two
    weeks.

    • Operation without the filter will
    cause failure.

    Do not drink water coming out of the air
    conditioner.
    • Otherwise, it may cause stomachache.

    Owner's Manual 7

    ENGLISH

    Avoid excessive cooling
    and perform ventilation
    sometimes.



  • Page 8

    Prior to Operation

    Prior to Operation
    Preparing for Operation
    1. Contact an installation specialist for installation.
    2. Plug in the power plug properly.
    3. Use a dedicated circuit.
    4. Do not use an extension cord.
    5. Do not start/stop operation by plugging/unplugging the power cord.
    6. If the cord/plug is damaged, replace it with only an authorized replacement part.

    Usage
    1. Being exposed to direct airflow for a long time may be hazardous to your health. Do not expose
    occupants, pets, or plants to direct airflow for a long time.
    2. Due to the possibility of oxygen deficiency, ventilate the room when using the appliance together with
    stoves or other heating devices.
    3. Do not use this air conditioner for non-specified special purpose (e.g. preserving precision devices,
    food, pets, plants, or art objects). Such use may damage your properties.

    Cleaning and Maintenance
    1. Do not touch the metal parts of the unit when removing the filter. Injury can occur.
    2. Do not use water to clean inside the air conditioner. Exposure to water can destroy the insulation,
    leading to electric shock.
    3. When cleaning the unit, first make sure that the power and breaker are turned off. The fan rotates at a
    very high speed during operation. There is a possibility of injury if the unit’s power is triggered while
    cleaning inner parts of the unit.

    Service
    For repair and maintenance, contact your authorized service dealer.

    8 Room Air Conditioner



  • Page 9

    Introduction

    Introduction
    Symbols used in this Manual
    ENGLISH

    This symbol alerts you to the risk of electric shock.
    This symbol alerts you to hazards that may cause harm to the
    air conditioner.
    NOTICE

    This symbol indicates special notes.

    Features
    WARNING: This appliance should be installed in accordance with national wiring
    regulations. This guide acts as a guide to help to explain product features.

    Indoor
    NANO Plasma Filter

    Signal Receptor
    Front Panel
    Air Filter
    Power Cord
    Air Discharge

    Outdoor
    Air Intake Vents

    Air Intake Vents

    Connecting
    Wires

    Connecting
    Wires
    Air Outlet Vents

    Piping
    Drain Hose

    Piping
    Drain Hose

    Base Plate

    Air Outlet Vents

    Base Plate

    Owner's Manual 9



  • Page 10

    Electrical Safety

    Electrical Safety
    WARNING: This appliance must be properly grounded.
    To minimize the risk of electric shock, you must alway plug into a grounded oulet.

    Preferred method

    Ensure proper ground
    exists before use

    WARNING: Do not cut or remove the grounding prong from the
    power plug.
    WARNING: Attaching the adapter ground terminal to the wall
    receptacle cover screw does not ground the appliance unless the
    cover screw is metal and not insulated, and the wall receptacle is
    grounded through the house wiring.
    WARNING: If you have any doubt whether the air conditioner is
    properly grounded, have the wall receptacle and circuit checked by
    a qualified electrician.

    10 Room Air Conditioner



  • Page 11

    Electrical Safety

    Temporary Use of an Adapter

    Temporary method
    Adapter Plug
    Metal Screw

    Receptacle Cover

    WARNING: Never use the appliance with a broken adapter.

    Temporary Use of an Extension Cord
    We strongly discourage the use of an extension cord due to potential safety hazards. For temporary
    situations, use only CSA certified and UL listed 3-wire grounded extension cords, rated 15 A, 125 V.

    Owner's Manual 11

    ENGLISH

    We strongly discourage the use of an adapter due to potential safety hazards. For temporary
    connections, use only a UL-listed adapter, available from most local hardware stores. Ensure that the
    large slot in the adapter is aligned with the large slot in the receptacle for a proper polarity connection.
    To disconnect the power cord from the adapter, use one hand on each to avoid damaging the ground
    terminal. Avoid frequently unplugging the power cord as this can lead to eventual ground terminal
    damage.



  • Page 12

    Operating Instructions

    Operating Instructions
    How to insert the Batteries
    1. Remove the battery cover by pulling it according to the arrow
    direction.
    2. Insert new batteries making sure that the (+) and (-) of battery are
    installed correctly.
    3. Reattach the cover by sliding it back into position.

    NOTICE Use 2 AAA(1.5volt) batteries.
    Do not use rechargeable batteries.

    Storage and Tips for using the Remote Controller
    • The remote controller may be stored by mounting
    it on a wall.

    • To operate the room air conditioner, aim the
    remote controller at the signal receptor.

    Signal receptor
    Receives the signals from the remote controller.(Signal receiving sound: two short beeps or one long beep.)

    Operation indicating lamps
    On/Off

    : Lights up during the system operation.

    Sleep Mode

    : Lights up during Sleep Mode Auto operation.

    Timer

    : Lights up during Timer operation.

    Defrost Mode

    : Lights up during Defrost Mode or Hot
    Start operation (Heat pump model only)

    Outdoor Unit
    Operation

    : Lights up during outdoor unit operation.
    (Cooling model only)

    Nano Plasma

    : The function illustrates its dynamic mode by using a multiple lighting system.

    12 Room Air Conditioner

    Operation indicating
    lamps



  • Page 13

    Operating Instructions

    Remote Control Operations
    The controls will look like the following.

    Signal transmitter

    5

    1

    6
    3
    4
    2
    7
    11
    8
    13

    10
    CANCEL
    ON

    OFF

    9
    12

    SET
    AUTO CLEAN

    17
    14

    15

    16

    Flip-up door
    (opened)

    Operation Mode
    Cooling Operation
    Auto Operation or Auto Changeover

    Healthy Dehumidification Operation
    Heating Operation

    • Cooling Model(

    ), Heat Pump Model(

    )

    1. START/STOP BUTTON
    Operation starts when this button is pressed
    and stops when the button is pressed again.
    2. OPERATION MODE SELECTION BUTTON
    Used to select the operation mode.
    3. ROOM TEMPERATURE SETTING
    BUTTONS
    Used to select the room temperature.
    4. INDOOR FAN SPEED SELECTOR
    Used to select fan speed in four steps
    low, medium, high and CHAOS.
    5. JET COOL/HEATING(OPTIONAL)
    Used to start or stop the speed
    cooling/heaing.(speed cooling/heating operates
    super high fan speed in cooling/heatig mode.)
    6. CHAOS SWING BUTTON
    Used to stop or start louver movement and
    set the desired up/down airflow direction.
    7. ON/OFF TIMER BUTTONS
    Used to set the time of starting and stopping
    operation. (See page 23)
    8. TIME SETTING BUTTONS
    Used to adjust the time. (See page 23)
    9. TIMER SET/CANCEL BUTTON
    Used to set the timer when the desired time
    is obtained and to cancel the Timer
    operation. (See page 23)
    10. SLEEP MODE AUTO BUTTON
    Used to set Sleep Mode Auto operation.
    (See page 23)
    11. AIR CIRCULATION BUTTON
    Used to circulate the room air without
    cooling or heating. (See page 24)
    12. ROOM TEMPERATURE CHECKING
    BUTTON
    Used to check the room temperature.
    13. NANO PLASMA(OPTIONAL)
    Used to start or stop the
    plasma-purification function. (See page 21)
    14. HORIZONTAL AIRFLOW DIRECTION
    CONTROL BUTTON (OPTIONAL)
    Used to set the desired vertical airflow
    direction.
    15. RESET BUTTON
    Used prior to resetting time.
    16. 2nd F Button
    Used prior to using modes printed in blue
    at the bottom of buttons. (See page 22)
    17. AUTO CLEAN (OPTIONAL)
    Used to set Auto Clean mode.

    Owner's Manual 13

    ENGLISH

    Controls



  • Page 14

    Operating Instructions

    Cooling operation

    1

    Press the Start/Stop button.
    The unit will respond with
    a beep.

    2

    Open the door of the remote controller. To select Cooling
    Operation, press the Operation Mode Selection button.
    Each time the button is pressed, the operation mode is
    shifted in the direction of the arrow.

    Cooling

    3
    ON

    Auto

    Healthy
    Dehumidification

    Heating
    (Heat pump model only)

    Close the door of the remote controller. Set the temperature
    lower than the room temperature. The temperature can be
    set within a range of 18°C~30°C at intervals of 1°C.
    To raise the temperature

    To lower the temperature

    4

    Set the fan speed again with the door
    of the remote controller still closed.
    You can select the fan speed in four
    steps-low, medium, high and CHAOS.
    Each time the button is pressed, the
    fan speed mode is shifted.

    Natural wind by the CHAOS logic
    ❏ For fresher feeling, press the Indoor fan speed selector and set to CHAOS mode. In this mode, the wind
    blows like a natural breeze by automatically changing fan speed according to the CHAOS logic.

    14 Room Air Conditioner



  • Page 15

    Operating Instructions

    Auto operation (Cooling model only)

    Press the Start/Stop button.
    The unit will respond with
    a beep.

    2

    Open the door of the remote controller. To select Auto
    Operation, press the operation mode selection button.
    Each time the button is pressed, the operation mode is
    shifted in the direction of the arrow.

    Cooling

    ON

    ENGLISH

    1

    3

    Auto

    Healthy
    Dehumidification

    Heating
    (Heat pump model only)

    The temperature and fan speed are automatically set by the
    electronic controls based on the actual room temperature. If
    you want to change the set temperature, press the Room
    Temperature Setting buttons. The cooler or warmer you feel,
    the more times (up to two times) you should press the button.
    The set temperature will be changed automatically.

    To raise the temperature

    To lower the temperature

    During Auto Operation
    ❏ You cannot control the indoor fan speed. It has already been set by the Fuzzy rule.
    ❏ If the system is not operating as desired, manually switch to another mode. The system will not
    automatically switch from the cooling mode to the heating mode, or from heating mode to cooling
    mode, it must be done by manually resetting.
    ❏ During Auto Operation, pressing the chaos swing button makes the horizontal louvers swing up and
    down automatically. If you want to stop auto-swing, press the chaos swing button again.

    Owner's Manual 15



  • Page 16

    Operating Instructions

    Auto changeover operation(Heat pump model only)

    1

    Press the Start/Stop button.
    The unit will respond with
    a beep.

    2

    Open the door of the remote controller. To select Auto Changeover
    Operation, press the Operation Mode Selection button.
    Each time the button is pressed, the operation mode is shifted in the
    direction of the arrow.

    Cooling

    3

    Auto
    changeover

    Healthy
    Dehumidification

    Heating
    (Heat pump model only)

    Close the door of the remote controller. Set the temperature
    lower than the room temperature. The temperature can be
    set within a range of 18°C~30°C at intervals of 1°C.
    To raise the temperature

    ON

    To lower the temperature

    4

    Set the fan speed again with the door
    of the remote controller still closed.
    You can select the fan speed in four
    steps-low, medium, high and CHAOS.
    Each time the button is pressed, the
    fan speed mode is shifted.

    During Auto changeover Operation
    The air conditioner changes the operation mode automatically to keep indoor temperature. When room
    temperature vary over ±2°C with respect to setting temperature, air conditioner keeps the room
    temperature within ±2°C with respect to setting temperature by auto changeover mode.

    16 Room Air Conditioner



  • Page 17

    Operating Instructions

    Healthy dehumidification operation

    Press the Start/Stop button.
    The unit will respond with
    a beep.

    2

    Open the door of the remote controller. To select Healthy
    Dehumidification Operation, press the Operation Mode
    Selection button.
    Each time the button is pressed, the operation mode is
    shifted in the direction of the arrow.

    Cooling

    3
    ON

    ENGLISH

    1

    Auto

    Healthy
    Heating
    Dehumidification (Heat pump model only)

    Set the fan speed again with the door
    of the remote controller still closed.
    You can select the fan speed in four
    steps-low, medium, high, or CHAOS.
    Each time the button is pressed, the
    fan speed mode is shifted.

    Natural wind by the CHAOS logic
    ❏ For fresher feeling, press the Indoor Fan Speed Selector and set
    to CHAOS mode. In this mode, the wind blows like a natural
    breeze by automatically changing fan speed according to the
    CHAOS logic.

    During Healthy Dehumidification Operation
    ❏ If you select the dehumidification mode on the operation selection button, the A/C starts to run the
    dehumidification function. It automatically sets the room temp. and airflow volume to the best condition
    for dehumidification, based on the sensed current room temp.
    In this case, however, the setting temp. is not displayed on the remote controller and you are not able to
    control the room temp. either.
    ❏ During the healthy dehumidification function, the airflow volume is automatically set according to the
    optimization algorithm responding to the current room temp. status, so that the room condition is kept
    healthy and comfortable even in the very humid season.

    Owner's Manual 17



  • Page 18

    Operating Instructions

    Heating operation (Heat pump model only)

    1

    Press the Start/Stop button.
    The unit will respond with
    a beep.

    2

    Open the door of the remote controller. To select Heating
    Operation, press the Operation Mode Selection button.
    Each time the button is pressed, the operation mode is
    shifted in the direction of the arrow.

    Cooling

    3
    ON

    Auto

    Heating
    Healthy
    (Heat pump model only)
    Dehumidification

    Close the door of the remote controller.
    Set the temperature higher than the room temperature.
    The temperature can be set within a range of 16°C~30°C at
    intervals of 1°C.
    To raise the temperature

    To lower the temperature

    4

    Set the fan speed again with the door of the
    remote controller still closed. You can
    select the fan speed in four steps–low,
    medium, high and CHAOS. Each time the
    button is pressed, the fan speed mode is
    shifted.

    Natural wind by the CHAOS logic
    ❏ For fresher feeling, press the Indoor Fan Speed Selector and set to CHAOS mode. In this mode, the
    wind blows like a natural breeze by automatically changing fan speed according to the CHAOS logic.

    18 Room Air Conditioner



  • Page 19

    Operating Instructions

    Jet cool operation

    ENGLISH

    1

    Press the Start/Stop button.
    The unit will respond with
    a beep.

    2

    Press the Jet Cool button to operate
    the speed cooling mode and the unit
    will operate at super high fan speed
    on cooling mode for 30 minutes.

    3

    To cancel the Jet Cool mode, press the Jet Cool button, the
    fan speed button or the room temperature setting button
    again and the unit will operate at high fan speed on cooling
    mode.

    or

    or

    NOTICE
    ❏ During the JET COOL function at any moment, the A/C starts to blow the cool air at extremely
    high speed for 30 minutes setting the room temp. automatically to 18°C. It is especially used to
    cool the room temp. quickly in a hot summer.
    In heat pump mode, neuro fuzzy mode, or auto changeover mode however, the JET COOL
    function is not available.
    ❏ In order to return to the normal cooling mode from the JET COOL mode, just press the operation
    mode selection button, airflow volume selection, temp. setting button or the JET COOL button
    again.

    Owner's Manual 19



  • Page 20

    Operating Instructions

    Jet heat operation (Optional)

    1

    Press the Start/Stop button.
    The unit will respond with
    a beep.

    2

    Open the door of the remote controller.
    To select Heating Operation.

    Cooling

    Auto
    changeover

    Healthy
    Dehumidification

    Heating
    (Heat pump model only)

    3

    Press the Jet Heat button to operate the
    speed heating mode and the unit will
    operate at super high fan speed on heating
    mode for 60 minutes.

    4

    To cancel the Jet Heat mode, press the Jet Heat button,
    the fan speed button or the room temperature setting
    button again and the unit will operate at high fan speed on
    heating mode.

    ON

    or

    or

    NOTICE

    ❏ During the JET HEAT function at any moment, the A/C starts to blow the heat air at extremely high speed for
    60 minutes setting the room temp. automatically to 30°C. It is especially used to heat the room temp. quickly
    in a cool winter.
    On cooling, healthy dehumidification mode or auto changeover mode, however, the JET HEAT function is not
    available.
    ❏ In order to return to the normal heating mode from the JET HEAT mode, just press the operation mode
    selection button, airflow volume selection, temp. setting button or the JET HEAT button again.

    20 Room Air Conditioner



  • Page 21

    Operating Instructions

    NANO PLASMA purification operation(Optional)

    ENGLISH

    1

    Press the Start/Stop button.
    The unit will respond with a
    beep.

    2

    Open the door of the remote
    controller. Press the NANO PLASMA
    button.
    Operation will start when the button
    is pressed and stop when the button
    is pressed again.

    3

    Set the fan speed again with the door of the remote
    controller closed. You can select the fan speed in four
    steps-low, medium, high or CHAOS.
    Each time the button is pressed, the fan
    speed mode is shifted.
    ❈ Air purifying operation (NANO PLASMA) can be
    with cooling, Heating or any other operations.

    NANO PLASMA Air Purifying Operation only
    If you press the only NANO PLASMA button,
    only NANO PLASMA purification function
    operates.
    Then, fan speed is low. You can select the fan
    speed in four steps-low, medium, high or
    CHAOS.
    Each time the button (
    ) is pressed, the fan
    speed mode is shifted.

    Owner's Manual 21



  • Page 22

    Operating Instructions

    2nd F operation

    1

    Press the Start/Stop button.
    The unit will respond with
    a beep.

    2

    Open the door of the remote control and press the 2nd
    Function button to operate functions printed in blue unter
    buttons.
    (Check the indication of 2nd function on the display of the
    remote controller.)
    These buttons can set the timer as follows:

    ON

    OFF

    SET

    CANCEL
    ON

    OFF

    SET
    AUTO CLEAN

    3

    2nd function disappears in a short time automatically or when
    the button is pressed again.

    For more details, refer to functions next pages.

    22 Room Air Conditioner



  • Page 23

    Operating Instructions

    Additional Features
    Sleep mode
    2. The Timer is programmed in one-hour increments by pressing the Sleep Mode Auto button 1 to 7 times. The
    sleep mode is available for 1 to 7 times. To alter the time period in steps of 1 hour, press the Sleep Mode
    Button while aiming at air conditioner.
    3. Make sure the Sleep Mode Auto LED lights up.
    To cancel the Sleep Mode, press the sleep Mode Auto button several times until the star
    (
    ) disappears from the operation display.
    NOTICE The Sleep Mode will be operated at slow fan speed (cooling) or medium fan speed (heat pump
    only) for a comfortable sleep.
    In sleep mode: Chaos Swing function does not operate.
    In cooling mode or healthydehumidification mode:
    The temperature will automatically rise by 1°C over the next 30 minutes and by 2°C in 1 hour for a comfortable
    sleep.

    Setting the time
    1. Time can be set only when you press the Reset button. Having replacing the batteries,
    you should press the reset buttons to reset the time. Press the Start/Stop button.
    2. Press 2nd F button and check if 2nd F icon is on.
    3. Press the Time Setting buttons until the desired time is set.
    CANCEL

    4. Press the Timer SET button.
    SET

    NOTICE

    Check the indicator for A.M. and P.M.

    Delay start/Pre-set stop
    1. Make sure the time is set correctly on the display of the remote controller.
    2. Press 2nd F button.
    3. Press the ON/OFF Timer buttons to turn Timer on or off.

    ON

    OFF

    4. Press the Time Setting buttons until the desired time is set.
    CANCEL

    5. To set the selected time, press the Timer setting button aiming the remote controller at the SET
    signal receptor.
    To cancel the timer setting
    Check if 2nd F icon is off.
    Press the Timer Cancel button aiming the remote controller at the signal receptor.
    (The timer lamp on the air conditioner and the display will go out.)
    NOTICE

    Select one of the following four types of operation.

    Delay OFF Timer

    Delay ON Timer

    CANCEL
    SET

    with the unit running

    Delay OFF and ON Timer Delay ON and OFF Timer

    Owner's Manual 23

    ENGLISH

    1. Press the Sleep Mode Auto button to set the time you want the unit to stop automatically.



  • Page 24

    Operating Instructions

    Airflow direction control
    The up/down and right/left airflow can be adjusted by
    using the remote control.

    Press Chaos Swing button and the louvers will swing.

    Press the button again and the louvers will stop. After
    30 minutes, the louvers return to the maximum airflow
    position automatically.

    Press the Start/Stop button to start the unit.

    Air circulation mode
    Circulates the room air without cooling or heating.
    1. Press the Start/Stop button. the unit will respond with a beep.
    2. Open the door on the remote control. Press the Air Circulation button. Close the door on the remote control.
    Now each time that you press the Indoor Fan Speed Selector, the fan speed is shifted from low to CHAOS
    and back to low again.

    CHAOS Air

    NOTICE

    Fan speed is on low.

    Fan speed is on medium.

    Fan speed is on high.

    CHAOS Air economizes power consumption and prevents overcooling. The fan speed is
    automatically changed from high to low or vice versa, depending on the ambient temperature.

    Auto clean
    AUTO CLEAN

    1. Whenever you press the Auto Clean button, Auto Clean Function will be reserved and cancelled.
    2. Auto Clean function works before and after cooling or dehumidification mode. For details, refer to
    the below points.
    3. When the unit is started after the reservation of Auto Clean ,the Cool Start function operates and
    indoor Fan is started after 20 seconds.
    4. When you press Start/Stop button to turn off the unit after the you have reserved Auto Clean
    function, the air-conditioner circulates the indoor air in the Auto Clean mode with no more
    Cooling or Dehumidification operation. For Cooling only model, it lasts for 30 minutes for Heat
    pump model, for 16 minutes.
    5. If you press the auto clean button again during the product operation , Auto Clean function will be
    cancelled.

    NOTICE

    ❏ During Auto Clean function, moistures left in indoor units after Cooling Operation or Healthy
    Dehumidification Operation can be removed.
    ❏ During Auto Clean function, only Start/Stop button, Plasma button and Auto Clean button are available.

    24 Room Air Conditioner



  • Page 25

    Operating Instructions

    Forced operation

    ENGLISH

    Operation procedures when the remote control can't be used.
    The operation will be started if the power button is pressed.
    If you want to stop operation, re-press the button.

    Power button

    Cooling Model
    Operating mode
    Indoor FAN Speed
    Setting Temperature

    Cooling
    High
    22°C

    Room Temp. ≥ 24°C

    Heat pump Model
    21°C ≤ Room Temp. < 24°C

    Room Temp. < 21°C

    Cooling
    High
    22°C

    Healthy Dehumidification
    High
    23°C

    Heating
    High
    24°C

    Test operation
    During the TEST OPERATION, the unit operates in cooling mode at high speed fan, regardless of room
    temperature and resets in 18 minutes.
    During test operation, if remote controller signal is received, the unit operates as remote controller sets.
    If you want to use this operation, open the front panel upward and Press the power button let it be pressed for
    about 3 seconds.
    If you want to stop the operation, re-press the button.

    Auto restart
    In case the power comes on again after a power failure, Auto Restarting Operation is the function to operate
    procedures automatically to the previous operating conditions.
    So there is no need of activating this function by pressing any key or button.
    In the initial mode, the fan operates at a low speed and the compressor starts 2.5~3 minutes later.
    As the compressor starts, the fan speed also resumes its previous setting mode.

    Helpful information

    High
    Speed

    Fan speed and cooling capacity.
    The cooling capacity indicated in the specification is the value
    when the fan speed is set to high, and the capacity will be lower
    at low or medium fan speed.
    High fan speed is recommended when you wish to cool the room
    quickly.

    Owner's Manual 25



  • Page 26

    Maintenance and Service

    Maintenance and Service
    Indoor Unit
    WARNING: Turn the system off before cleaning. To clean, wipe with a soft, dry cloth.
    Do not use bleach or abrasives.
    NOTICE

    Supply power must be disconnected before cleaning the indoor unit.

    Air filter
    The air filters behind the front grill should be checked and cleaned once
    every 2 weeks or more often if neccessary.
    1. Lift the front panel. After lifting up the filter tab a bit, take the filter
    out slowly
    NOTICE

    Filter

    Clean the filter after stopping the product.

    2. Clean the filter with a vacuum or warm, soapy water.
    • If dirt is conspicuous, wash with a solution of detergent in lukewarm water.
    • If hot water (40°C or more) is used, it may be deformed.
    3. After washing with water, dry well in the shade.
    4. Re-install the air filter.
    Filter

    Never use any of the followings:
    • Water hotter than 40°C.
    Could cause deformation and/or discoloration.
    • Volatile substances
    Could damage the surfaces of the air conditioner.

    Outdoor Unit
    The heat exchanger coils and panel vents of the outdoor unit should be checked regularly.
    If clogged with dirt or soot, the heat exchanger
    and panel vents may be professionally steam cleaned.
    NOTICE

    Dirty or clogged coils will reduce the
    operating efficiency of the system and cause Air intake (Side)
    vents
    higher operating costs.

    (Rear)
    Piping
    Drain Hose

    Air outlet
    vents

    (Rear)

    Air intake
    vents

    (Rear)

    (Side)

    Air outlet
    vents

    26 Room Air Conditioner

    Piping
    Drain Hose

    Air intake
    vents

    (Side)
    Piping
    Drain Hose

    Air outlet
    vents



  • Page 27

    Maintenance and Service

    Cleaning Filter
    • Recomended use period : About 3 months
    1. Lift the front panel, hold it up and pull the Air filter.

    ENGLISH

    Front Panel
    Air Filter

    2. Remove the Plasma Filter.

    WARNING: Don't touch the PLASMA Filter
    within 10 seconds after opening the inlet
    grille, it may cause electric shock.

    Plasma Purifier
    Filter

    3. Put the Plasma Filter into the neutral detergent for 1~2
    hours and then raise it.

    4. Insert the Plasma Filter after perfectly drying it in shade.
    Now insert Air Filter and close the front panel completely
    by matching the hook.

    Front Panel Hook

    Air Filter
    Air Filter

    Hook-Hanger

    Owner's Manual 27



  • Page 28

    Maintenance and Service

    Common Problems and Solutions
    Before calling for service
    If you have problems with your air conditioner, read the following information and try to solve
    the problem. If you cannot find a solution, turn off the air conditioner and contact your dealer.
    Air conditioner does not operate
    1. Ensure that the air conditioner is plugged into a proper outlet.
    2. Check the fuse or circuit breaker.
    3. Check whether the voltage is unusually high or low.
    Air does not feel cold enough on the cooling setting
    1. Ensure that the temperature settings are correct.
    2. Check to see if the air filter is clogged with dust. If so, replace the filter.
    3. Ensure that the air flow from the outside is not obstructed and that there is a clearance of
    over 20" between the back of the air conditioner and the wall or fence behind it.
    4. Close all doors and windows and check for any source of heat in the room.

    Before calling for service, please review the following list of common problems and
    solutions.
    The air conditioner is operating normally when:
    • You hear a pinging noise. This is caused by water being picked up by the fan on rainy days
    or in highly humid conditions. This feature is designed to help remove moisture in the air
    and improve cooling efficiency.
    • You hear the thermostat click. This is caused by the compressor cycle starting and
    stopping.
    • You see water dripping from the rear of the unit. Water may be collected in the base pan in
    highly humid conditions or on rainy days. This water overflows and drips from the rear of
    the unit.
    • You hear the fan running while the compressor is silent. This is a normal operational
    feature.

    28 Room Air Conditioner



  • Page 29

    Maintenance and Service

    Troubleshooting
    The air conditioner may be operating abnormally when:

    Air
    conditioner
    does not start

    Air
    conditioner
    does not cool
    as it should

    Air
    conditioner
    freezing up

    Possible Causes

    What To Do

    ■ The air conditioner is
    unplugged.

    • Make sure the air conditioner plug is
    pushed completely into the outlet.

    ■ The fuse is blown/circuit
    breaker is tripped.

    • Check the house fuse/circuit breaker
    box and replace the fuse or reset the
    breaker.

    ■ Power failure.

    • If power failure occurs, turn the mode
    control to Off.
    When power is restored, wait 3
    minutes to restart the air conditioner
    to prevent tripping of the compressor
    overload.

    ■ Airflow is restricted.

    • Make sure there are no curtains,
    blinds, or furniture blocking the front of
    the air conditioner.

    ■ The thermostat may not be
    set high enough.

    • Turn the knob to a higher number.
    The highest setting provides
    maximum cooling.

    ■ The air filter is dirty.

    • Clean the filter at least every 2 weeks.
    See the care and Maintenance
    section.

    ■ The room may have been
    hot.

    • When the air conditioner is first turned
    on, you need to allow time for the
    room to cool down.

    ■ Cold air is escaping.

    • Check for open furnace floor registers
    and cold air returns.

    ■ Cooling coils have iced up.

    • See Air Conditioner Freezing Up
    below.

    ■ Ice blocks the air flow and
    stops the air conditioner from
    cooling the room.

    • Set the mode control at High Fan or
    High Cool with thermostat at 1 or 2.

    * You can refer to the Energy Star program in detail at www.energystar.gov.

    Owner's Manual 29

    ENGLISH

    Problem



  • Page 30

    Memo

    30 Room Air Conditioner






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für LG A07AHB wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von LG A07AHB in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 1,96 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von LG A07AHB

LG A07AHB Bedienungsanleitung - Deutsch - 30 seiten

LG A07AHB Bedienungsanleitung - Französisch - 30 seiten

LG A07AHB Bedienungsanleitung - Italienisch - 30 seiten

LG A07AHB Bedienungsanleitung - Spanisch - 34 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info