Zoom out
Zoom in
Vorherige Seite
1/29
Nächste Seite
www.lg.com
OWNER’S MANUAL
AIR CONDITIONER
Please read this manual carefully before operating
your set and retain it for future reference.
TYPE : Multi
The equipment complies with requirements of the Technical
Regulation, in terms of restrictions for the use of certain dangerous
substances in electrical and electronic equipment.
P/NO : 3828A20394A
ENGLISH ITALIANO
ESPAÑOL
FRANÇAIS
DEUTSCH
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    ENGLISH
    ITALIANO
    ESPAÑOL
    FRANÇAIS

    OWNER’S MANUAL

    AIR CONDITIONER
    TYPE : Multi

    The equipment complies with requirements of the Technical
    Regulation, in terms of restrictions for the use of certain dangerous
    substances in electrical and electronic equipment.

    www.lg.com
    P/NO : 3828A20394A

    DEUTSCH

    Please read this manual carefully before operating
    your set and retain it for future reference.



  • Page 2

    Safety Precautions
    Multi

    Type Air Conditioner Owner’s Manual

    TABLE OF CONTENTS
    FOR YOUR RECORDS
    Safety Precautions.................3
    Prior to Operation ..................6
    Operating Instructions...........7
    Remote Controller ..............7
    Remote Control Operation....10
    Additional features...............18
    Maintenance and Service ....22
    Operation Tips ..................27
    Troubleshooting ..............28

    Write the model and serial numbers here:
    Model #
    Serial #
    You can find them on a label on the side of each unit.
    Dealer's Name
    Date Purchased
    ■ Staple your receipt to this page in the event you need it
    to prove date of purchase or for warranty issues.

    READ THIS MANUAL
    Inside you will find many helpful hints on how to use and
    maintain your air conditioner properly. Just a little
    preventive care on your part can save you a great deal
    of time and money over the life of your air conditioner.
    You'll find many answers to common problems in the
    chart of troubleshooting tips. If you review our chart of
    Troubleshooting Tips first, you may not need to call for
    service at all.

    PRECAUTION
    • Contact the authorized service technician for repair or
    maintenance of this unit.
    • Contact the installer for installation of this unit.
    • The air conditioner is not intended for use by young
    children or invalids without supervision.
    • Young children should be supervised to ensure that
    they do not play with the air conditioner.
    • When the power cord is to be replaced, replacement
    work shall be performed by authorized personnel only
    using only genuine replacement parts.
    • Installation work must be performed in accordance
    with the National Electric Code by qualified and
    authorized personnel only.

    2 Multi Type Air Conditioner



  • Page 3

    Safety Precautions

    Safety Precautions

    WARNING

    This symbol indicates the possibility of death or serious injury.

    CAUTION

    This symbol indicates the possibility of injury or damage.

    ■ Meanings of symbols used in this manual are as shown below.

    Be sure not to do.
    Be sure to follow the instruction.

    WARNING
    ■ Installation
    Do not disassemble or repair the product.
    • Contact your dealer and service center.

    Do not handle the flamable gas or explosive
    materials near the product.
    • Otherwise, it may cause fire or failure of product.

    Do not install the product on an defected
    installation stand.
    • Otherwise, It may cause injury or accident.

    For installation, always contact the dealer or
    service center.
    • Otherwise, it may cause fire, electric shock, explosion
    or injury.

    For electric work, contact the dealer or
    service center.
    • It will cause fire or electric shock.

    Always earth the product.
    • It will cause fire or electric shock.

    Do not install where flamable gas could leak.
    • Otherwise, it may cause esplosion or fire.

    Be cautious when unpack and install the
    product.
    • Sharp edges could cause injury.

    Do not install the product on an defected
    installation stand.
    • Otherwise, It may cause injury or accident.

    Do not use damaged power cable.
    • It will cause fire or electric shock.

    Always intstall an circuit breaker and main
    breaker.
    • No installation may cause fire and electric shock.

    Owner's Manual 3

    ENGLISH

    To prevent injury to the user or other people and property damage, the following instructions
    must be followed.
    ■ Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is
    classified by the following indications.



  • Page 4

    Safety Precautions

    ■ Operation
    Do not touch(operate) product with wet
    hands.

    If strange sounds, or small or smoke comes
    from product. Turn the breaker off or
    disconnect the power supply cable.

    • Otherwise, it may cause fire or electric shock.

    • Otherwise, it may cause electric shock or fire.

    Do not put the heater, etc. near the power
    cable.

    Do not put water into electric part.

    • Otherwise, it may cause fire and electric shock.

    • Otherwise, it may cause fire or failure of procuct, and
    electric shock.

    Ventilate well in using with a stove, etc.

    When the product is not going to be used for
    a long time,disconnect the power supply plug
    or turn off the breaker.

    • Otherwise, an ozygen shortage may occur.

    • Otherwise, it may cause failure of product or fire.

    Do not place heavy object on the power
    cable.

    When the product is flooded, contact the
    service center.

    • Otherwise, it may cause fire or electric shock.

    • Otherwise, it may cause fire or eletric shock.

    Cover the electric part.

    Do not turn the breaker on/off or
    connect/disconnect the power supply plug
    during operation.

    • Otherwise, it may cause fire or electric shock.

    • Otherwise, it may cause fire or electric shock.

    Do not open the suction inlet of the product
    during operation.
    • Otherwise, it may cause electric shock or failure.

    Be cautious that children could not step on
    the product.
    • Otherwise, children may be seriously injured.

    Do not touch the metal parts of the product
    when removing the air filter.
    • Otherwise, it may cause personal injury.

    Do not step or put anyting on the product.
    • Otherwise, it may cause personal injury and failure of
    product.

    Take care to ensure that water could not enter
    into the product.
    • Otherwise, it may cause fire or electric shock.

    CAUTION
    ■ Installation
    Always inspect gas leakage after installation
    and repair of product.
    • Otherwise, it may cause failure of product.

    Do not carry the product by oneself.
    • Otherwise it may harm to your health.

    4 Multi Type Air Conditioner

    Install the drain hose to ensure that drain can
    be securely done.
    • Otherwise, it may cause water leakage.

    Keep the level even in installing the product.
    • Otherwise, it may cause vibration or water leakage.



  • Page 5

    Safety Precautions
    Install the product so that noise or hot wind
    from the outdoor unit. May not give any
    damage to the neighborhoods.

    ENGLISH

    • Otherwise, it may cause dispute with the
    neighborhoods.

    ■ Operation
    Do not expose your skin directly to cool air for a long
    time.
    • Otherwise, it may harm to your health.

    Turn the main power off when cleaning the product.
    • Otherwise, it may cause fire and electric shock.

    Do not use the product for special purpose to preserve
    animals, vegetables, precision device, or art objects, etc.
    • Otherwise, it may cause loss of property.

    Do not place obstacles aroud the flow inlet or
    outlet.
    • Othewise, it may cause failure of product.

    Use a soft cloth to clean, Do not use wax,
    tinner or a strong detergent, etc.
    • Otherwise, it may change the apperance of the
    product.

    Do not insert your hand or bars, etc. into the
    air inlet/outlet.
    • Otherwise, it may cause personal injury.

    Do not operate the product for a long time in
    high humidity, and leave a door or window open.
    • Otherwise, water may drop and wet or damage
    furniture, etc.

    Replace the 2 batteries with new ones of
    same type.

    When flamable gas leakages from the product,
    open the window for ventilation.
    • Otherwise, it may cause explosion or fire.

    Do not put a pet or houseplant where it will be
    exposed to direct air flow.
    • This could injure the pet or plant.

    Stop operation and close the window in strom or
    hurricane.
    • Otherwise, it may cause failure of product or electric
    shock.

    Always insert the filter securly.
    Clean it once every two weeks.
    • Otherwise, it may cause failure of the product.

    Do not drink water drained from the product.
    • Otherwise, it may harm to your health.

    Do not use the product at the closed space
    for a long time.
    • Otherwise, it may cause suffocation due to poor
    oxygen.

    Do not step onto an unstable bench when
    maintaining the product, etc.
    • Otherwise, it may cause personal injury.

    Do not charge or disassemble the batteries and
    do not throw them into a fire.
    • Otherwise, it may cause fire or an explosion.

    If liquid from the batteries gets onto your skin
    or clothes, wash it well with clean water.
    • Otherwise it may harm to your health.

    Use a rated fuse.
    • Otherwise, It will cause fire or electric shock.

    Owner's Manual 5



  • Page 6

    Prior to operation

    Prior to operation
    Preparing for operation
    1. Contact an installation specialist for installation.
    2. Connect the power cable between indoor unit and outdoor unit properly.
    3. Use a dedicated circuit.
    4. If the cord/plug is damaged, replace it with only an authorized replacement part.

    Usage
    1. Being exposed to direct airflow for an extended period of time could be hazardous to your health.
    Do not expose occupants, pets, or plants to direct airflow for extended periods of time.
    2. Due to the possibility of oxygen deficiency, ventilate the room when used together with stoves or
    other heating devices.
    3. Do not use this air conditioner for non-specified special purposes (e.g. preserving precision devices,
    food, pets, plants, and art objects). Such usage could damage the items.

    Cleaning and maintenance
    1. Do not touch the metal parts of the unit when removing the filter. Injuries can occur when handling
    sharp metal edges.
    2. Do not use water to clean inside the air conditioner. Exposure to water can destroy the insulation,
    leading to possible electric shock.
    3. When cleaning the unit, first make sure that the power and breaker are turned off. There is a
    possibility of injury if the unit’s power is accidentally triggered on while cleaning inner parts of the
    unit.

    Service
    For repair and maintenance, contact your authorized service dealer.

    Symbols Used in this Manual
    This symbol alerts you to the risk of electric shock.
    This symbol alerts you to hazards that could cause harm to the
    air conditioner.
    NOTICE

    This symbol indicates special notes.

    6 Multi Type Air Conditioner



  • Page 7

    Operating Instructions

    Operating Instructions
    Remote Controller
    ENGLISH

    1 Remove the battery cover by pulling it according to the arrow
    direction.

    2 Insert new batteries making sure that the (+) and (-) of battery are
    installed correctly.

    3 Reattach the cover by sliding it back into position.

    NOTICE
    • Use 2 AAA(1.5volt) batteries. Do not use rechargeable batteries.

    Storage and Tips For Using the Remote Controller
    • The refering to the following picture, fix the remote controller holder onto the wall using screws.

    • To operate the room air conditioner, aim the Remote Controller to the signal receptor.
    Standard Type

    Artcool Type

    Artcool Deluxe Type

    Artcool Mirror Type

    Owner's Manual 7



  • Page 8

    Operating Instructions

    Signal Receptor
    Receives the signals from the remote controller.(Signal receiving sound: two short beeps or one long beep.)
    Operation Indication Lamps

    Signal
    receptor
    Operation indication lamps

    On/Off

    : Lights up during the system operation.

    Sleep Mode

    : Lights up during Sleep Mode Auto operation.

    Timer

    : Lights up during Timer operation.

    Defrost Mode

    : Lights up during Defrost Mode or Hot Start operation (Heat pump model only)

    OUT OUTDOOR UNIT
    DOOR OPERATION

    : Lights up during outdoor unit operation. (Cooling model only)

    Receives the signals from the remote controller.(Signal receiving sound: two short beeps or one long beep.)
    Operation Indication Lamps
    On/Off

    : Lights up during the system operation.

    Sleep Mode

    : Lights up during Sleep Mode Auto operation.

    Timer

    : Lights up during Timer operation.

    Defrost Mode

    : Lights up during Defrost Mode or
    Hot Start operation.(Heat pump model only)

    Outdoor unit operation : Lights up during outdoor unit operation.
    (Cooling model only)
    : Indicate PLASMA purifier operation.

    Operation indication lamps

    PLASMA

    Each icon shows its own function mode.
    Cooling Mode

    Lights up during Cooling operation. (Outline)

    Auto Operation Mode

    Lights up during Auto operation. (Outline)

    Healthy Dehumidification
    Lights up during Healthy Dehumidification operation. (Outline)
    Mode
    Heating Mode

    Lights up during Heating operation.
    (Heat Pump model only) (Outline)

    Defrost Mode

    Lights up during Defrost controller or
    Hot Start in Heating operation. (Outline)

    Air circulation Mode

    Lights up during Air Circulation operation. (Outline)

    Sleep Mode

    Lights up during Sleep Mode operation.

    Timer

    Lights up during Timer operation.

    Auto Cleaning Mode

    Lights up during Auto Cleaning reservation.

    Jet Cool Mode

    Lights up during Jet Cool Operation.

    Plasma

    Lights up during Plasma operation.

    Fan Speed (Low)

    Lights up when Fan speed is low.

    Fan Speed (Medium)

    Lights up when Fan speed is Medium.

    Fan Speed (High)

    Lights up when Fan speed is High.

    Fan Speed (Chaos)

    Lights up when Fan speed is Chaos.

    Desire temperature For cooling,dehumidification,heating modes it display Destired temperature
    indicator
    • Cooling
    : 18~30°C
    • AI : Auto Operation
    • Dehumidification : 18~30°C
    • Po : Jet Cool
    • Heating
    : 16~30°C
    • Lo : Test Mode
    Desire temperature Icon
    Indoor temperature Icon

    8 Multi Type Air Conditioner



  • Page 9

    Operating Instructions

    : Lights up during the system operation.
    : Lights up during Sleep Mode Auto operation.

    Timer

    : Lights up during Timer operation.

    Defrost Mode

    : Lights up during Defrost Mode or
    Hot Start operation.(Heat pump model only)

    Plasma

    : Lights up during Plasma operation.

    Desire temperature : For cooling,dehumidification,heating modes it display Destired temperature
    • Cooling
    : 18~30°C
    • AI : Auto Operation
    indicator
    • Dehumidification : 18~30°C
    • Po : Jet Cool
    • Heating
    : 16~30°C
    • Lo : Test Mode

    Owner's Manual 9

    ENGLISH

    On/Off
    Sleep Mode



  • Page 10

    Operating Instructions

    Remote Control Operation
    The Remote Controller transmits the signals to the system.

    1

    START/STOP BUTTON
    Operation starts when this button is pressed and
    stops when the button is pressed again.

    2

    OPERATION MODE SELECTION BUTTON
    Used to select the operation mode.

    3

    ROOM TEMPERATURE
    SETTING BUTTONS
    Used to select the room temperature.

    4

    INDOOR FAN SPEED SELECTOR
    Used to select fan speed in four steps
    low, medium, high and CHAOS.

    5

    JET COOL
    Used to start or stop the speed cooling/heating.
    (Speed cooling/heating operates super high fan
    speed.)

    6

    CHAOS SWING BUTTON
    Used to stop or start louver movement and set
    the desired up/down airflow direction.

    7

    ON/OFF TIMER BUTTONS
    Used to set the time of starting and stopping operation.

    8

    TIME SETTING BUTTONS
    Used to adjust the time.

    9

    TIMER SET/CANCEL BUTTON
    Used to set the timer when the desired time is obtained and
    to cancel the Timer operation.

    10

    SLEEP MODE AUTO BUTTON
    Used to set Sleep Mode Auto operation.

    11

    AIR CIRCULATION BUTTON
    Used to circulate the room air without cooling or heating.

    12

    ROOM TEMPERATURE CHECKING BUTTON
    Used to check the room temperature.

    Cooling Operation

    13

    PLASMA (OPTIONAL)
    Used to start or stop the plasma-purification function.

    Auto Operation

    14

    RESET BUTTON
    Initialize remote controller.

    Healthy Dehumidification Operation

    15

    2nd F Button
    Used prior to using modes printed in blue at the bottom of
    buttons.

    16

    AUTO CLEAN
    Used to set Auto Clean mode.

    17

    LED LUMINOSITY (OPTIONAL)
    Used to control the luminosity of the display on unit

    18

    HORIZONTAL AIRFLOW DIRECTION CONTROL
    BUTTON (NOT ON ALL MODELS)
    Used to set the desired horizontal airflow direction.

    Signal transmitter

    5
    6

    1
    3

    4
    2
    7
    11
    8
    13

    10
    CANCEL
    ON

    OFF

    9
    16
    17
    12
    18
    15

    SET
    AUTO CLEAN

    14

    Flip-up door
    (opened)

    Operation Mode

    Heating Operation

    • Cooling Model(

    ), Heat Pump Model(

    10 Multi Type Air Conditioner

    )

    (Heat Pump)

    (Cooling Only)



  • Page 11

    Operating Instructions

    Cooling Operation
    ENGLISH

    1

    Press the Start/Stop button.
    The unit will respond with beep sound.

    2

    Open the door on the Remote Controller. To select Cooling
    Operation, press the Operation Mode Selection button.
    Each time the button is pressed, the operation mode is shifted
    in the direction of the arrow.

    Cooling

    Auto

    Healthy
    Dehumidification

    Heating
    (Heat pump model only)

    (Cooling Only (Heat Pump
    model)
    model)

    3
    ON

    Set the temperature lower than the room temperature.
    The temperature can be set within a range of 18°C~30°C in
    1°C.
    To raise the temperature

    To lower the temperature

    4

    You can select the fan speed in four stepslow, medium, high, or CHAOS. Each time the
    button is pressed, the fan speed mode is
    shifted.

    Natural wind by the CHAOS logic
    ❏ For more fresh feeling, press the Indoor Fan Speed Selector and set CHAOS mode. In this mode, the wind
    blows like natural breeze by automatically changing fan speed according to the CHAOS logic.

    Owner's Manual 11



  • Page 12

    Operating Instructions

    Auto Operation

    1

    Press the Start/Stop button.
    The unit will respond with beep
    sound.

    2

    Open the door on the Remote Controller. To select Auto
    Operation, press the Operation Mode Selection button.
    Each time the button is pressed, the operation mode is
    shifted in the direction of the arrow.

    Cooling

    Auto

    Healthy
    Dehumidification

    Heating
    (Heat pump model only)

    (Cooling Only (Heat Pump
    model)
    model)

    ON

    3

    The temperature and fan speed are automatically set by the
    electronic controls based on the actual room temperature. If
    you want to change the set temperature, press the Room
    Temperature Setting buttons. The set temperature will be
    changed considering room temperature.

    To raise the temperature

    To lower the temperature

    DURING AUTO OPERATION:
    ❏ You cannot switch the indoor fan speed. It has already been set by the Fuzzy rule.
    ❏ If the system is not operating as desired, manually switch to another mode. The system will not
    automatically switch from the cooling mode to the heating mode, or from heating to cooling, then you must
    set the mode and the desired temperature again.
    ❏ During Auto Operation, pressing the chaos swing button makes the horizontal louvers swing up and down
    automatically. If you want to stop auto-swing, press the chaos swing button again.

    12 Multi Type Air Conditioner



  • Page 13

    Operating Instructions

    Healthy Dehumidification Operation
    Press the Start/Stop button.
    The unit will respond with beep
    sound.

    2

    Open the door on the Remote Controller. To select Healthy
    Dehumidification Operation, press the Operation Mode
    Selection button.
    Each time the button is pressed, the operation mode is shifted
    in the direction of the arrow.

    Cooling

    (Cooling Only (Heat Pump
    model)
    model)

    3
    ON

    ENGLISH

    1

    Auto

    Healthy
    Heating
    Dehumidification (Heat pump model only)

    Set the fan speed. You can select the fan
    speed in four steps - low, medium, high, or
    CHAOS. Each time the button is pressed,
    the fan speed mode is shifted.

    NATURAL WIND BY THE CHAOS LOGIC
    ❏ For more fresh feeling, press the Indoor Fan Speed Selector and set
    CHAOS mode. In this mode, the wind blows like natural breeze by
    automatically changing fan speed according to the CHAOS logic.

    DURING HEALTHY DEHUMIDIFICATION OPERATION:
    ❏ If you select the dehumidification mode on the operation selection button, the A/C starts to run the
    dehumidification function, automatically setting the room temp. and air volume to the best condition for
    dehumidification based on the sensed room temp.
    In this case, the setting temp. is not displayed in the Remote Controller and you are not able to control
    the room temp. either.
    ❏ During the healthy dehumidification function, the air volume is automatically set according to the
    algorithm responding to the current room temp. and makes the room condition healthy and
    comfortable even in the high humidity season.

    Owner's Manual 13



  • Page 14

    Operating Instructions

    Heating Operation(Heat pump model only)

    1

    Press the Start/Stop button.
    The unit will respond with
    beep sound.

    2

    Open the door on the Remote Controller. To select Heating
    Operation, press the Operation Mode Selection button.
    Each time the button is pressed, the operation mode is
    shifted in the direction of the arrow.

    Cooling

    3

    Auto

    Healthy
    Dehumidification

    Heating
    (Heat pump model only)

    Set the temperature higher than the room temperature.
    The temperature can be set within a range of 16°C~30°C in
    1°C.

    ON

    To raise the temperature

    To lower the temperature

    4

    Set the fan speed again. You can
    select the fan speed in four steps–low,
    medium, high, or CHAOS. Each time
    the button is pressed, the fan speed
    mode is shifted.

    NATURAL WIND BY THE CHAOS LOGIC
    ❏ For more fresh feeling than other fan speed, press the Indoor Fan Speed Selector and set to CHAOS
    mode. In this mode, the wind blows like natural breeze by automatically changing fan speed according to
    the CHAOS logic.

    14 Multi Type Air Conditioner



  • Page 15

    Operating Instructions

    Jet Cool
    ENGLISH

    1

    Press the Start/Stop button.
    The unit will respond with
    beep sound.

    2

    Press the Jet Cool button to operate the
    speed cooling/heating mode and the unit
    will operate in super high fan speed on
    cooling/heating mode for 30/60 minutes.

    3

    To cancel the Jet Cool mode, press the Jet Cool button or
    the fan button or the room temperature setting button again
    and the unit will operate in high fan speed in cooling/heating
    mode

    or

    or

    NOTICE
    ❏ Jet Cool function in heating mode is available on Artcool type only.
    ❏ During the JET COOL function at any moment, the A/C starts to blow the cool/heat air at
    extremely high speed for 30/60 minutes setting the room temp. automatically to
    18°C/30°C. It is especially used to cool/heat the room temperature in the shortest time.
    ❏ In order to return to the normal cooling/heating mode from the Jet Cool mode, you just
    press either the operation mode selection button, air volume selection or temp. setting
    button or the JET COOL button again.

    Owner's Manual 15



  • Page 16

    Operating Instructions

    NANO PLASMA Purification Operation(Optional)

    1

    Press the Start/Stop button.
    The unit will respond with beep sound.

    2

    Open the door on the Remote
    Controller. Press the PLASMA air
    purifying operation ON/OFF button.
    Operation will start when the button
    is pressed and stop when the button
    is pressed again.

    3

    Set the fan speed. You can select the fan speed in
    four steps-low, medium, high or CHAOS.
    Each time the button is pressed, the fan speed
    mode is shifted.
    ❈ Air purifying operation (PLASMA) is
    available in Heating or any other operations.

    PLASMA Air Purifying Operation only
    If you press the PLASMA button, NANO PLASMA
    air purifying operates.
    Each time the button (
    ) is pressed, the fan
    speed mode is shifed.

    16 Multi Type Air Conditioner



  • Page 17

    Operating Instructions

    2nd F Operation
    ENGLISH

    1

    Press the Start/Stop button.
    The unit will respond with
    beep sound.

    2

    Open the door of the Remote Controller and press the 2nd F
    button to operate functions printed in blue at bottom of
    buttons.
    (Check the indication of 2nd function on Remote Controller
    display.)
    These buttons operate the timer setting as follows:
    CANCEL
    ON

    OFF

    SET
    AUTO CLEAN

    CANCEL
    ON

    OFF

    SET
    AUTO CLEAN

    3

    2nd function goes off in a short time automatically or when the
    button is pressed again.

    For more details, refer to functions next page.

    Owner's Manual 17



  • Page 18

    Additional features

    Additional features
    Sleep Mode
    1. Press the Sleep Mode Auto button to set the time
    you want the unit to turn off automatically.
    1. The Timer is programmed in one-hour increments
    by pressing the Sleep Mode Auto button 1 to 7
    times.
    The sleep mode is available for 1 to 7 times.
    To alter the time period in steps of 1 hour, press
    the Sleep Mode Button while aiming at air
    conditioner.
    3. Make sure the Sleep Mode Auto LED lights up.

    To cancel the Sleep Mode, press the sleep
    Mode Auto button several times until the star
    (
    ) disappears from the operation display.

    NOTICE The Sleep Mode will be operated
    at low fan speed (cooling) or medium fan
    speed (heat pump only) for quiet sleeping.
    IN COOLING MODE: The temperature will
    automatically rise by 1°C over the next 30
    minutes and by 2°C in 1 hour for comfortable
    sleeping.

    Setting the Time
    1. Time can be set only when you have pressed the
    Reset button. If you have just replaced the
    batteries, the Reset button should be pressed to
    reset the time.
    Press the Start/Stop button.

    3. Press the Time Setting buttons until the desired
    time is set.

    CANCEL

    4. Press the Timer SET button.

    2. Press 2nd F button
    and check if 2nd F icon is on.

    SET

    NOTICE Check the indicator for A.M. and
    P.M.

    Delay Start/Pre-Set Stop
    1. Make sure the time is set correctly on the
    Remote Controller display.

    5. Press the selected on/off setting by
    pressing the Timer SET button while
    aiming the Remote Controller at the signal
    receptor.

    2. Press 2nd F button.
    3. Press the ON/OFF Timer
    buttons to turn Timer on or off.

    ON

    OFF

    4. Press the Time Setting
    buttons until the desired
    time is set.

    NOTICE

    CANCEL
    SET

    To cancel the setting the timer.
    Press the Timer Cancel button while
    CANCEL
    aiming Remote Controller at the signal
    SET
    receptor.
    (The timer lamp on the air conditioner and
    the display will go out.)

    Select one of the following four types of operation.
    with the unit running

    Delay OFF Timer

    Delay ON Timer

    18 Multi Type Air Conditioner

    Delay OFF and ON Timer

    Delay ON and OFF Timer



  • Page 19

    Additional features

    Vertical Airflow Direction Control

    Press the Start/Stop button
    to start the unit.
    Open the door on the
    Remote Controller.
    Press Chaos Swing button and the
    louvers will swing up and down.
    Press the Chaos Swing button again
    to set the vertical louver at the desired
    airflow direction.

    NOTICE
    ❏ If you press the CHAOS swing button, the
    horizontal airflow direction is changed automatically
    based on the CHAOS algorithm to distribute the air
    in the room evenly and at the same time to make
    the human body feel most comfortable, as if
    enjoying a natural breeze.
    ❏ Always use the Remote Controller to adjust the
    up/down airflow direction. Manually moving the
    vertical airflow direction louver by hand could
    damage the air conditioner.
    ❏ When the unit is shut off, the up/down airflow
    direction louver will close the air outlet vent of the
    system.
    To adjust left/right(Horizontal Airflow) direction
    Caution :Ensure that the unit is turned
    off before adjusting the horizontal
    airflow direction control.
    Carefully open vertical louver to
    allow access to the horizontal
    airflow direction.
    Adjust the left/right airflow direction by hand.

    Artcool Type
    The up/down and right/left airflow can be adjusted by
    using the Remote Controller.

    Press Chaos Swing button and the louvers will swing.

    Press the button again and the louvers will stop. After
    30 minutes, the louvers return to the maximum airflow
    position automatically.
    Press the Start/Stop button to start the unit.

    Horizontal Airflow Direction Control (Optional)
    The left/right(Horizontal Airflow) can be adjusted by using the remote control.
    1. Press the Start/Stop button to start the unit.
    2. Open the door on the remote control. Press the Airflow Direction Start/Stop button and the louvers will swing
    left and right. Press the Horizontal Airflow Direction Control Button again to set the horizontal louver at the
    desired airflow direction.

    Owner's Manual 19

    ENGLISH

    Standard, Artcool Deluxe Type
    The up/down airflow
    (Vertical Airflow) can be
    adjusted by using the
    Remote Controller.



  • Page 20

    Additional features

    Air Circulation Mode
    Circulates the room air without cooling or heating.
    1. Press the Start/Stop button. The unit will respond with beep sound.
    2. Open the door on the Remote Controller. Press the Air Circulation button. Now each time that you
    press the Indoor Fan Speed Selector, the fan speed is shifted from low to CHAOS and back to low
    again.

    CHAOS Air

    Fan speed is on low.

    Fan speed is on medium.

    Fan speed is on high.

    NOTICE

    ❏ CHAOS Air economizes power consumption and prevents overcooling. The fan speed is automatically
    changed from high to low or vice versa, depending on the ambient temperature.

    Auto Clean (Artcool, Artcool Deluxe, Artcool Mirror Type Only)
    1. Press the Start/Stop button to Start the unit.

    AUTO CLEAN

    2. Open the door on the Remote Controller
    Select Cooling Operation or Healthy Dehumidification Operation.
    3. Press the Auto clean button.
    4. Although the Start/Stop button is pressed, unit operates in Auto clean Mode for 15
    minutes - operates in heating operation Mode for 1 minute and circulates the room
    air without cooling and heating for 14 minutes. And then unit stops operating.

    NOTE:
    ❏ During Auto Clean function, moistures left in indoor units after Cooling Operation or Healthy
    Dehumidification Operation can be removed.
    ❏ During Auto Clean function, only Start/Stop button, Plasma button and Auto Clean button are available.

    Display Luminosity (AMNH076DZ*0[MC07AH*NZ0], AMNH096DU*0[MC09AH*NU0])
    AUTO CLEAN

    • The Display Luminosity of the unit can be adjusted by using the
    Remote Controller.
    Press the start/stop button to start the unit. Open the door on the
    Remote Controller, press the 2nd F button and, press display luminosity
    button. Display will be dark. Press the button again to set bright display.

    20 Multi Type Air Conditioner



  • Page 21

    Additional features

    Forced Operation

    Power
    button
    Open the front
    panel upward

    Cooling Model
    Operating mode
    Indoor FAN Speed
    Setting Temperature

    Cooling
    High
    22°C

    Power
    button

    Power button

    Power
    Power
    button
    button

    Heat pump Model
    Room Temp. ≥ 24°C
    Cooling
    High
    22°C

    21°C ≤ Room Temp. < 24°C
    Healthy Dehumidification
    High
    23°C

    Room Temp. < 21°C
    Heating
    High
    24°C

    Auto restart
    In case the power comes on again after a power failure, the unit operates automatically to the previous
    operating conditions.
    So there is no need of activating this function by pressing any key or button.
    In the initial mode, the fan operates at a low speed and the compressor starts about 3 minutes later.
    As the compressor starts, the fan speed also resumes its previous setting mode.
    In case of absence for a long time while power failure, turn off main power to avoid
    undersired Auto restart.

    Helpful information
    Fan speed and cooling capacity.
    The cooling/heating capacity indicated in the specification is the value when the fan speed is set to high,
    and the capacity will be lower at low or medium fan speed.
    High fan speed is recommended when you wish to cool/heat the room quickly.

    High
    d
    Spee

    High
    d
    Spee

    High
    d
    Spee

    High
    d
    Spee

    Owner's Manual 21

    ENGLISH

    The operation will be started operation if the power button is pressed without remote controller.
    If you want to stop operation, re-press the button.



  • Page 22

    Maintenance and Service

    Maintenance and Service
    CAUTION: Before performing any maintenance, turn off the main power to the system.

    Standard Type Indoor Unit
    Grille, Case, and Remote Control
    ❏ Turn the system off before cleaning.
    To clean, wipe with a soft, dry cloth. Do not use
    bleach or abrasives.

    NOTICE Supply power must be disconnected
    before cleaning the indoor unit.

    ❏ Never use any of the followings:
    • Water hotter than 40°C
    Could cause deformation and/or
    discoloration.
    • Volatile substances
    Could damage the surfaces of the air
    conditioner.

    Pow

    d er

    G a s o li n e

    Air inlet vent

    Air outlet vent

    Air filters
    (behind front panel)
    Vertical louver Horizontal louver

    AIR FILTERS
    The air filters behind the front grille should be
    checked and cleaned once in every 2 weeks or
    more often if neccessary.

    1. Lift the front access panel and pull the filter tab
    slightly forward to remove the filter.
    2. Clean the filter with a vacuum cleaner or warm,
    soapy water.
    • If dirt is conspicuous, wash with a solution
    of detergent in lukewarm water.
    • If hot water (40°C or more) is used, it may
    be deformed.
    3. After washing with water, dry well in the shade.
    4. Re-install the air filter.

    NANO PLASMA FILTER, TRIPLE
    DEODORIZING FILTER(OPTIONAL)
    The NANO PLASMA filter behind the air filters
    should be checked and cleaned once in every 3
    months or more often if necessary.

    1. After removing the air filters, pull slightly forward
    to remove the NANO PLASMA filter.
    2. Remove dust with vacuum cleaner or air.
    (You should not try to wash with water).
    3. Note the cuts of electric discharge lines.

    TRIPLE DEODORIZING Filter

    4. Re-install the NANO PLASMA filter to the original
    position.

    NANO PLASMA Filter

    1. After removing the air filters, pull slightly forward
    to remove the TRIPLE DEODORIZING filter.
    Don’t touch this PLASMA Filter within 10
    seconds after opening the inlet grille, it may
    cause an electric shock.

    22 Multi Type Air Conditioner

    2. Dry in the sunlight for two hours.
    3. Re-install the TRIPLE DEODORIZING filter to
    the original position.



  • Page 23

    Maintenance and Service

    Replacement of Purifying Filter(Optional)
    • Recomended use period : About 2 years
    2. Remove Triple deodorizing Filter.
    3. Insert new Triple deodorizing Filter.
    Air filter

    2
    3

    4. Reinsert air filter and close front panel.

    Tripe Deodorizing Filter

    Artcool Type Indoor Unit
    Grille, Case, and Remote Control
    ❏ Turn the system off before cleaning. To clean, wipe
    with a soft, dry cloth. Do not use bleach or
    abrasives.

    NOTICE
    Supply power must be disconnected before cleaning

    ❏ Never use any of the followings:
    • Water hotter than 40°C.
    Could cause deformation and/or discoloration.
    • Volatile substances
    Could damage the surfaces of the air
    conditioner.

    the indoor unit.

    Filter

    AIR FILTER
    The air filters behind the
    front grill should be
    checked and cleaned
    once every 2 weeks or
    more often if neccessary.
    Filter

    1. Pull down the grille bottom, After lifting up the
    filter tab a bit and take the filter out slowly
    (Notice : Clean the filter after being stopped the
    product)
    2. Clean the filter with a vacuum or warm, soapy
    water.
    • If dirt is conspicuous, wash with a solution of
    detergent in lukewarm water.
    • If hot water (40°C or more) is used, it may be
    deformed.
    3. After washing with water, dry well in the shade.
    4. Re-install the air filter.

    Owner's Manual 23

    ENGLISH

    1. Open front panel and remove air filters.



  • Page 24

    Maintenance and Service

    Cleaning of Purifying Filter
    • Recomended use period : About 3 months
    1. Lift the front panel, hold it up and pull the Air
    filter.

    2. Remove the Plasma Filter.

    Front Panel
    Air Filter

    Plasma Purifier
    Filter

    3. Put in Plasma Filters in the neutral detergent
    for 1~2 hours and then raise them.

    4. Insert the Plasma Filter after perfectly drying in
    shade.
    Now insert Air Filter and close the Front panel
    Completely by matching the hook.
    Front Panel Hook

    HookHanger

    Air Filter
    Air Filter

    Artcool Deluxe Type Indoor Unit
    1. Open the upside of Front Panel

    2. Lift up the Front panel.
    The hook of panel comes off.

    Front panel
    Panel hook

    24 Multi Type Air Conditioner



  • Page 25

    Maintenance and Service
    3. Come down the panel and then remove
    air filters.

    4. Do cleaning by soft brush and a vacuum cleaner. If it
    has hard pollution, wash by water.

    Air filters

    ❏ Never use any of the followings:
    • Water hotter than 40°C
    Could cause deformation and/or
    discoloration.
    • Volatile substances
    Could damage the surfaces of
    the air conditioner.

    Air filters

    ENGLISH

    Don't touch this nano PLASMA Filter
    within 10 seconds after opening the inlet
    grille, it may cause an electric shock.

    5. Relocate dried air filters at the shade and then close
    the panel.

    Pow

    d er

    G a s o li n e

    Cleaning of Purifying Filter
    • Recomended use period : About 3 months
    1. Open the upside of Front panel.

    2. Put up the front panel.
    The hook of panel comes off.

    3. Remove air filter and then pull out
    nano plasma filter.
    Nano Plasma filter

    Front panel

    Panel
    hook

    4. Clean nano plasma filter with the vacuum cleaner.

    5. Insert the nano plasma filters at the shade and then
    put in air filter.

    Plasma
    filter

    Owner's Manual 25



  • Page 26

    Maintenance and Service

    Artcool Mirror Type
    Grille, Case, and Remote Control
    ❏ Turn the system off before cleaning.
    To clean, wipe with a soft, dry cloth. Do not use bleach or abrasives.

    NOTICE Supply power must be disconnected before cleaning the indoor unit.

    AIR FILTERS
    The air filters behind the front grille should be checked
    and cleaned once in every 2 weeks or more often if
    neccessary.
    1. Open the front panel as shown.
    2. Then pull the filter tab slightly forward to remove
    the air filter.
    3. Clean the filter with a vacuum cleaner or warm, soapy
    water.
    • If dirt is conspicuous, wash with a solution of
    detergent in lukewarm water.
    • If hot water (40°C or more) is used, it may be
    deformed.

    Front panel

    4. After washing with water, dry well in the shade.
    5. Re-install the air filter.

    NANO PLASMA FILTER
    The NANO PLASMA filter behind the air filters should
    be checked and cleaned once in every 3 months or
    more often if necessary.

    Plasma filter

    1. After removing the air filters, pull slightly forward to
    remove the NANO PLASMA filter.
    2. Remove dust with vacuum cleaner or air.
    (You should not try to wash with water).
    3. Note the cuts of electric discharge lines.
    4. Re-install the NANO PLASMA filter to the original
    position.

    ❏ Never use any of the followings:
    • Water hotter than 40°C
    Could cause deformation and/or discoloration.
    • Volatile substances
    Could damage the surfaces of the air
    conditioner.

    26 Multi Type Air Conditioner

    Don’t touch this PLASMA Filter within 10
    seconds after opening the inlet grille, it may
    cause an electric shock.

    Pow

    d er

    G a s o li n e



  • Page 27

    Maintenance and Service

    When the air conditioner is not going to be used for a long time.

    1

    Operate the air conditioner on Air
    circulation mode (Refer to page 21) for 2
    to 3 hours.
    • This will dry out the internal mechanisms.

    2

    Turn off the circuit breaker, and
    disconnect the power cable.

    CAUTION: Turn off the circuit

    When the air conditioner is to be used again.

    1

    Clean the air filter and install it in the
    indoor unit.
    (Refer to page 23~27 for cleaning filters.)

    2

    Check that the air inlet and outlet of the
    indoor/outdoor unit are not blocked.

    breaker when the air conditioner is not
    going to be used for a long time.
    Dirt may collect and may cause a fire.

    3

    Remove the batteries from the Remote
    Controller.

    Operation Tips
    Do not overcool the room.

    Keep blinds or curtains
    closed.

    Keep the room temperature
    uniform.

    This is not good for the health
    and wastes electricity.

    Do not let direct sunshine enter
    the room when the air
    conditioner is in operation.

    Adjust the vertical and
    horizontal airflow direction to
    ensure a uniform temperature in
    the room.

    Make sure that the doors
    and windows are shut tight.

    Clean the air filter regularly.

    Ventilate the room
    occasionally.

    Avoid opening doors and
    windows if possible to keep the
    cool air in the room.

    Blockages in the air filter reduce
    the airflow and lower cooling
    and dehumidifying effects.
    Clean at least once every two
    weeks.

    Since windows are kept closed,
    it is a good idea to open them
    and ventilate the room now and
    then.

    Owner's Manual 27

    ENGLISH

    When air conditioner is not going to be
    used for a long time.



  • Page 28

    Maintenance and Service

    Troubleshooting
    Check the following points before requesting repairs or service.... If the fault persists, please contact your dealer or service center.

    Case

    Explanation

    See page
    11,14

    The air conditioner does not
    operate.

    • Check room temperature setting?
    • Check if circuit breaker is on?

    The room has a peculiar
    odor.

    • Check that this is not a damp smell exuded by
    the walls, carpet, furniture, or cloth items in the
    room.

    -

    It seems that condensation
    is leaking from the air
    conditioner.

    • Check the drain hose is connected tight or if
    indoor unit is installed even.

    -

    Air conditioner does not
    operate for about 3 minutes
    after turning on.

    • This is the protector of the mechanism.
    • Wait about 3 minutes and operation will begin.
    • About 3 minutes delay is applied to protect
    compressor from frequenty on/off.

    Does not cool or heat
    effectively.

    • Is the air filter dirty? See air filter cleaning
    instructions.

    22~26

    • Has the temperature been set correctly?

    11,14

    -

    -

    • Are the indoor unit's air inlet or outlet vents
    obstructed?

    -

    • For a noise that sounds like water flowing.
    -This is the sound of refrigerant flowing inside
    the air conditioner unit.
    • For a noise that sounds like the compressed
    air releasing into atmosphere.
    -This is the sound of the dehumidifying water
    being processed inside the air conditioning
    unit.

    -

    Remote Controller display is
    faint, or no display at all.

    • Are the batteries depleted?
    • Are the batteries inserted in the opposite (+)
    and (-) directions?

    7

    Crack sound is heard.

    • This sound is generated by the
    expansion/constriction of the front panel, etc.
    due to changes of temperature.

    -

    The air conditioner
    operation is noisy.

    28 Multi Type Air Conditioner



  • Page 29






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für LG AMNH18GD3R0 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von LG AMNH18GD3R0 in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 2,64 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von LG AMNH18GD3R0

LG AMNH18GD3R0 Bedienungsanleitung - Deutsch - 29 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info