Zoom out
Zoom in
Vorherige Seite
Nächste Seite
• Please read this owner's manual carefully and thoroughly
before installing and operating your room air conditioner.
• Please retain this owner's manual for future reference after
reading it thoroughly.
Prior to installation, this air-
conditioning unit must be
submitted for approval by the
utility service which provides
electricity (EN 61000-2,
EN 61000-3 Norm).
Models: SE/S3 Series
Type: ART COOL Mirror Type

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.


Inhalt der Seiten

  • Page 1


    Prior to installation, this airconditioning unit must be
    submitted for approval by the
    utility service which provides
    electricity (EN 61000-2,
    EN 61000-3 Norm).


    Models: SE/S3 Series
    Type: ART COOL Mirror Type




    • Please read this owner's manual carefully and thoroughly
    before installing and operating your room air conditioner.
    • Please retain this owner's manual for future reference after
    reading it thoroughly.

  • Page 2

    Artcool Deluxe Type Indoor Unit Owner’s Manual

    Safety Precautions.................3

    Write the model and serial numbers here:
    Model #

    Prior to Operation ..................8

    Serial #

    Product Introduction..............9

    You can find them on a label on the side of each unit.

    Operating Instructions.........10

    Date Purchased

    Maintenance and Service ....12

    ■ Staple your receipt to this page in the event you need
    to prove date of purchase or to issue warranty.

    Dealer's Name

    Before you Call for Service ....14

    Inside you will find many helpful hints on how to use
    and maintain your air conditioner properly. Just a little
    preventive care on your part can save you a great deal
    of time and money over the life of your air conditioner.
    You'll find many answers to common problems in the
    chart of troubleshooting tips. If you review our chart of
    Troubleshooting Tips first, you may not need to call
    for service at all.

    • Contact the authorized service technician for repair or
    maintenance of this unit.
    • Contact the installer for installation of this unit.
    • The air conditioner is not intended for use by young
    children or invalids without supervision.
    • Young children should be supervised to ensure that
    they do not play with the air conditioner.
    • When the power cord is to be replaced, replacement
    work shall be performed by authorized personnel only
    using only genuine replacement parts.
    • Installation work must be performed in accordance with
    the National Electric Code by qualified and authorized
    personnel only.


    Indoor Unit

  • Page 3

    Safety Precautions

    Safety Precautions


    This symbol indicates the possibility of death or serious injury.


    This symbol indicates the possibility of injury or damage to properties only.

    ■ Meanings of symbols used in this manual are as shown below.

    Be sure not to do.
    Be sure to follow the instruction.

    ■ Installation
    Do not use a defective or
    underrated circuit breaker.
    Use this appliance on a
    dedicated circuit.

    For electrical work, contact
    the dealer, seller, a qualified
    electrician, or an Authorized
    Service Center.

    • There is risk of fire or electric

    • Do not disassemble or repair
    the product. There is risk of fire
    or electric shock.

    Install the panel and the
    cover of control box

    Always install a dedicated
    circuit and breaker.

    • There is risk of fire or electric

    • Improper wiring or installation
    may cause fire or electric shock

    Always ground the product.

    • There is risk of fire or electric

    Use the correctly rated
    breaker or fuse.
    • There is risk of fire or electric

    Owner’s Manual 3


    To prevent injury to the user or other people and property damage, the following instructions must be
    ■ Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified
    by the following indications.

  • Page 4

    Safety Precautions
    Do not modify or extend the
    power cable.
    • There is risk of fire or electric

    For installation, always contact the
    dealer or an Authorized Service Center.
    • There is risk of fire, electric
    shock, explosion, or injury.

    Do not install, remove, or
    re-install the unit by
    yourself (customer).
    • There is risk of fire, electric
    shock, explosion, or injury.

    Do not install the product on
    a defective installation stand.
    • It may cause injury, accident, or
    damage to the product.

    Be cautious when
    unpacking and installing
    the product.
    • Sharp edges could cause injury.
    Be especially careful of the
    case edges and the fins on the
    condenser and evaporator.

    Be sure the installation area
    does not deteriorate with age.
    • If the base collapses, the air
    conditioner could fall with it,
    causing property damage,
    product failure, and personal

    ■ Operation
    Do not let the air conditioner run for a
    long time when the humidity is very high
    and a door or a window is left open.
    • Moisture may condense and
    wet or damage furniture.

    Do not plug or unplug the
    power supply plug during
    • There is risk of fire or electric


    Indoor Unit

    Take care to ensure that power
    cable could not be pulled out
    or damaged during operation.

    Do not place anything on
    the power cable.

    • There is risk of fire or electric

    • There is risk of fire or electric

    Do not touch(operate) the
    product with wet hands.

    Do not place a heater or
    other appliances near the
    power cable.

    • There is risk of fire or electrical

    • There is risk of fire and electric

  • Page 5

    Safety Precautions
    Do not store or use flammable
    gas or combustibles near the

    Do not use the product in a
    tightly closed space for a
    long time.

    • It may cause There is risk of
    fire, failure of the product, or
    electric shock.

    • There is risk of fire or failure of

    • Oxygen deficiency could occur.


    When flammable gas leaks,
    turn off the gas and open a
    window for ventilation
    before turn the product on.

    If strange sounds, or small or
    smoke comes from product. Turn
    the breaker off or disconnect the
    power supply cable.

    • Do not use the telephone or
    turn switches on or off.
    There is risk of explosion or fire

    • There is risk of electric shock or

    Do not open the inlet grill of the
    product during operation.
    (Do not touch the electrostatic
    filter, if the unit is so equipped.)
    • There is risk of physical injury,
    electric shock, or product

    When the product is soaked
    (flooded or submerged),
    contact an Authorized
    Service Center.
    • There is risk of fire or electric

    Ventilate the product from time to time
    when operating it together with a stove, etc.
    • There is risk of fire or electric shock.

    Stop operation and close the window
    in storm or hurricane. If possible,
    remove the product from the window
    before the hurricane arrives.
    • There is risk of property
    damage, failure of product, or
    electric shock.

    Be cautious that water
    could not enter the product.

    • There is risk of fire, electric
    shock, or product damage.

    Turn the main power off when cleaning or
    maintaining the product.
    • There is risk of electric shock.

    Owner’s Manual 5


    Do not allow water to run
    into electric parts.

  • Page 6

    Safety Precautions
    When the product is not be used for a long
    time, disconnect the power supply plug or
    turn off the breaker.
    • There is risk of product damage or failure, or
    unintended operation.

    Take care to ensure that nobody could step
    on or fall onto the outdoor unit.
    • This could result in personal injury and product

    ■ Installation
    Always check for gas
    (refrigerant) leakage after
    installation or repair of product.
    • Low refrigerant levels may
    cause failure of product.

    Install the drain hose to ensure
    that water is drained away
    • A bad connection may cause
    water leakage.

    Keep level even when
    installing the product.
    • To avoid vibration or water


    Do not install the product where the
    noise or hot air from the outdoor unit
    could damage the neighborhoods.
    • It may cause a problem for your

    Use two or more people to lift
    and transport the product.
    • Avoid personal injury.

    Do not install the product
    where it will be exposed to
    sea wind (salt spray) directly.
    • It may cause corrosion on the product.
    Corrosion, particularly on the condenser
    and evaporator fins, could cause product
    malfunction or inefficient operation.

    ■ Operation
    Do not expose the skin directly to cool air
    for long periods of time.
    (Don't sit in the draft.)
    • This could harm
    to your health.


    Indoor Unit

    Do not use the product for special purposes, such as
    preserving foods, works of art, etc. It is a consumer
    air conditioner, not a precision refrigeration system.
    • There is risk of
    damage or
    loss of property.

  • Page 7

    Safety Precautions
    Do not block the inlet or
    outlet of air flow.

    • There is risk of fire, electric
    shock, or damage to the plastic
    parts of the product.

    Do not touch the metal parts of
    the product when removing the
    air filter. They are very sharp!
    • There is risk of personal injury.

    Wa Thinner

    Do not step on or put
    anyting on the product.
    (outdoor units)
    • There is risk of personal injury
    and failure of product.

    Do not drink the water
    drained from the product.

    • It is not sanitary and could
    cause serious health issues.

    Always insert the filter
    securely. Clean the filter
    every two weeks or more
    often if necessary.
    • A dirty filter reduces the efficiency
    of the air conditioner and could
    cause product malfunction or

    • There are sharp and moving
    parts that could cause personal

    Use a firm stool or ladder
    when cleaning or
    maintaining the product.

    Replace the all batteries in the
    remote control with new ones
    of the same type. Do not mix
    old and new batteries or
    different types of batteries.

    • Be careful and avoid personal

    • There is risk of fire or explosion

    Do not recharge or disassemble the
    batteries. Do not dispose of batteries in a
    • They may burn or explode.

    Do not insert hands or other
    objects through the air inlet
    or outlet while the product
    is operated.

    If the liquid from the batteries gets onto your skin
    or clothes, wash it well with clean water. Do not
    use the remote if the batteries have leaked.
    • The chemicals in batteries could cause burns or
    other health hazards.

    Owner’s Manual 7


    • It may cause product failure.

    Use a soft cloth to clean. Do
    not use harsh detergents,
    solvents, etc.

  • Page 8

    Prior to operation

    Prior to Operation
    Preparing for operation
    1. Contact an installation specialist for installation.
    2. Use a dedicated circuit.

    1. Being exposed to direct airflow for an extended period of time could be hazardous to your health.
    Do not expose occupants, pets, or plants to direct airflow for extended periods of time.
    2. Due to the possibility of oxygen deficiency, ventilate the room when used together with stoves or
    other heating devices.
    3. Do not use this air conditioner for non-specified special purposes (e.g. preserving precision
    devices, food, pets, plants, and art objects). Such usage could damage the items.

    Cleaning and maintenance
    1. Do not touch the metal parts of the unit when removing the filter. Injuries can occur when handling
    sharp metal edges.
    2. Do not use water to clean inside the air conditioner. Exposure to water can destroy the insulation,
    leading to possible electric shock.
    3. When cleaning the unit, first make sure that the power and breaker are turned off. The fan rotates
    at a very high speed during operation. There is a possibility of injury if the unit’s power is
    accidentally triggered on while cleaning inner parts of the unit.

    For repair and maintenance, contact your authorized service dealer.


    Indoor Unit

  • Page 9

    Product Introduction

    Product Introduction
    Here is a brief introduction of the indoor units.
    Please see the information specific to your indoor unit type.


    Indoor Units

    Art Cool Mirror(Type 1)
    Display panel LED indicators

    Art Cool Mirror(Type 2)
    Display panel LCD indicators

    Air inlet
    Air filter

    Air inlet
    Plasma filter

    Plasma filter

    Air filter

    Air discharge

    Air discharge

    Front panel
    Power cord
    ON/OFF button

    Signal receiver

    Front panel
    Power cord
    Signal receiver

    ON/OFF button

    Operation indication lamps

    : Lights up during the system operation, error code and auto restart setting.

    Sleep mode

    : Lights up during sleep mode auto operation.


    : Lights up during timer operation or sleep mode auto operation.

    Defrost mode : Lights up during defrost mode or *hot start operation (Heat pump model only)

    : The function illustrates its dynamic mode by using a multiple lighting system.

    Power Display : Indicates the setting temperature and operation mode.
    (Cooling, heating,auto operation,dehumidification mode)
    * Hot start operation: Stops the indoor fan in heating operation for minutes to prevent cold air from blowing out
    from unit.
    * In defrost mode unit stops heating operation for few minutes to remove formation of ice on the heat
    exchanger coils to maintain the efficiency.

    Owner’s Manual 9

  • Page 10

    Operating Instructions

    Operating Instructions
    Name and Function of Remote Controller (Optional)




    Room Temp

    AUTO Heater Preheat
    JET Defrost Humidify
    SLo Filter Out door
    1 2 3 4





    Operation unit No Func Program set

    On Off
    Set no. Time 01























    • Remote Controller Model
    Standard Type : PQRCUCA0
    Simple Type : PCRCUSZ0
    Deluxe type
    : PQRCUDS0


    Indoor Unit


    1. Operation indication screen
    2. Swirl button(Not Available)
    3. 2ndF button
    4. Timer set/cancel
    5. Set temperature button
    6. ON/OFF button
    7. Fan operation
    8. Operation mode selection button
    9. Fan speed button
    10. Horizontal/Vertical air flow
    direction button(option)
    11. Room temperature
    12. Plasma button
    13. Time reset button
    14. Operation lamp

  • Page 11

    Operating Instructions

    Wireless Remote Controller(Optional)

    of handling the Remote Controller
    • Aim at the signal receptor on the wired remote controller so as to operate.
    • The remote control signal can be received at a distance of up to about 7m.
    • Be sure that there are no obstructions between the remote controller and the signal receptor.
    • Do not drop or throw the remote controller.
    • Do not place the remote controller in a location exposed to direct sunlight, or near the heating unit, or any other heat source.
    • Block a strong light over the signal receptor with a curtain or etc. so as to prevent the abnormal operation. (ex:electronic quick start, ELBA,
    inverter type fluorescent lamp)

    Owner’s Manual 11


    1. Start/Stop Button
    Operation starts when this button is pressed.
    2. Operation Mode Selection Button
    Used to select the operation mode.
    3. Room Temperature Setting Buttons
    Used to select the room temperature.
    4. Indoor Fan Speed Selector
    Used to select fan speed in four steps low, medium, high
    and Chaos.
    5. Jet Cool
    Speed cooling/heating operates super high fan speed.
    6. Chaos Swing Button
    Used to stop or start louver movement and set the
    desired up/down airflow direction.
    7. On/Off Timer Buttons
    Used to set the time of starting and stopping operation.
    8. Time Setting Button
    Used to adjust the time.
    Timer Set/Cancel Button
    Used to set the timer when the desired time is obtained
    and to cancel the Timer operation.
    10. Sleep Mode Auto Button
    Used to set Sleep Mode Auto operation.
    Flip-up door
    11. Air Circulation Button
    Used to circulate the room air without cooling or heating.
    Operation Mode
    12. Room Temperature Button
    Used to set the desired horizontal airflow direction.
    Cooling Operation
    13. Plasma(optional)
    Used to start or stop the plasma-purification function.
    Auto Operation
    14. Horizontal Airflow Direction Control Button
    Healthy Dehumidification Operation
    Used to set the desired horizontal airflow direction.
    15. Reset Button
    Heating Operation
    Initialize remote controller.
    • Cooling Model( ), Heat Pump Model( )
    16. 2nd F Button
    Used prior to using modes printed in blue at the bottom of buttons.
    17. Auto Clean(optional)
    • Remote Controller Model : PQWRHSF0(Heat pump)
    Used to set Auto Clean mode.
    PQWRCSF0(Cooling only)
    Signal transmitter

  • Page 12

    Maintenance and Service

    Maintenance and Service
    Before performing any maintenance, turn off the main power to the system.
    Never use any of the followings:
    • Water hotter than 40°C.
    Could cause deformation and/or discoloration.
    • Volatile substances.
    Could damage the surfaces of the air conditioner.


    d er

    G a s o li n e

    Air Filters
    The air filters behind the front panel / grill should be checked and cleaned once in
    every 2 weeks or more often if necessary. To remove the filters see the self
    explanatory diagrams for each model type. Clean the filters with a vacuum cleaner
    or warm soapy water. If dirt is not easily removed, wash with a solution of
    detergent in luke warm water. Dry well in shade after washing and reinstall the
    filters back in place.

    Plasma Filters
    The plasma filters behind the air filter should be checked and cleaned once in every 3
    months or more often if necessary. To remove the filters see the self explanatory
    diagrams for each model type. Clean the filters with a vacuum cleaner. If it is dirty
    wash it with water and dry well in shade an install back in place.

    Deodorizer Filters
    Remove the deodorizer filters behind the air filter and expose them in direct
    sunlight for 2 hours.
    And then insert these filters into original position.

    Removal of Filters
    Two different methods to open the front panel based on types of air conditioner as below ;
    Type 1:
    Open the upside of the panel and lift it up as shown. The hooks of the panel will come off. Remove the
    air filters. Then pull out the plasma filter
    Plasma filter

    Front panel
    Panel hook

    After cleaning and drying well reinstall the filters in their original position.
    Type 2:
    Open the front panel as shown.
    Then pull the filter tab slightly forward to remove the air filter.
    After removing the air filter remove the plasma and deodorizer filter by slightly pulling forward.
    Plasma filter

    Front panel

    Don't touch this plasma filter within 10 seconds after opening the inlet grille, it may cause an electric shock.


    Indoor Unit

  • Page 13

    Maintenance and Service

    When the air conditioner is not going to be used for a long time.
    When the air conditioner is to be used again.

    Operate the air conditioner at the
    following settings for 2 to 3 hours.
    • Type of operation: Fan operation mode.
    • This will dry out the internal mechanisms.

    Turn off the breaker.

    Clean the air filter and install it in the
    indoor unit.
    (Refer to page 12 for cleaning it.)

    Check that the air inlet and outlet of the
    indoor/outdoor unit are not blocked.

    Turn off the breaker when the air conditioner
    is not going to be used for a long time.
    Dirt may collect and may cause a fire.

    Check that the ground wire is
    connected correctly. It may be connect
    to the indoor unit side.

    Helpful information
    The air filters and your electiric bill.
    If the air filters become clogged with dust, the
    cooling capacity will drop, and 6% of the electricity
    used to operate the air conditioner will be wasted.

    Operation Tips
    Do not overcool the room.

    Keep blinds or curtains

    Keep the room temperature

    This is not good for the health
    and wastes electricity.

    Do not let direct sunshine
    enter the room when the air
    conditioner is in operation.

    Adjust the vertical and
    horizontal airflow direction to
    ensure a uniform temperature
    in the room.

    Make sure that the doors
    and windows are shut tight.

    Clean the air filter regularly.

    Ventilate the room

    Avoid opening doors and
    windows as much as possible
    to keep the cool air in the

    Blockages in the air filter
    reduce the airflow and lower
    cooling and dehumidifying
    effects. Clean at least once
    every two weeks.

    Since windows are kept
    closed, it is a good idea to
    open them and ventilate the
    room now and then.

    Owner’s Manual 13


    When it is not going to be used for
    a long time.

  • Page 14

    Maintenance and Service

    Before you call for service...

    Troubleshooting Tips! Save time and money!
    Check the following points before requesting repairs or service.... If the malfunction persist,
    please contact your dealer.

    The air conditioner
    does not operate.

    The room has a
    peculiar odor.

    It seems that
    condensation is
    leaking from the air

    Air conditioner does
    not operate for about
    3 minutes when

    • Check that this is not
    a damp smell exuded
    by the walls, carpet,
    furniture or cloth
    items in the room.

    • Condensation occurs
    when the airflow from
    the air conditioner
    cools the warm room

    • This is the protector
    of the mechanism.
    • Wait about three
    minutes and
    operation will begin.

    Does not cool or heat

    The air conditioner
    operation is noisy.

    Crack sound is

    • Is the air filter dirty?
    See air filter cleaning
    • The room may have
    been very hot when
    the room air
    conditioner was first
    turned on. Allow time
    for it to cool down.
    • Has the temperature
    been set incorrectly?
    • Are the indoor unit's
    air inlet or outlet vents

    • For a noise that
    sounds like water
    -This is the sound of
    freon flowing inside
    the air conditioner
    • For a noise that
    sounds like the
    compressed air
    releasing into
    -This is the sound of
    the dehumidifying
    water being
    processed inside the
    air conditioning unit.

    • This sound is generated
    by the expansion/
    constriction of the front
    panel, etc. due to
    changes of

    • Have you made a
    mistake in timer
    • Has the fuse blown
    or has the circuit
    breaker been

    Remote control
    display is faint, or no
    display at all.

    • Are the batteries
    • Are the batteries
    inserted in the
    opposite (+) and (-)

    Filter sign lamp
    (LED) is ON.

    • Cleaning the filter,
    press the Timer button
    and button of wired
    remote controller at
    the same time for 3

    WATER RESISTANT: The outdoor side of this appliance is WATER RESISTANT.
    The indoor side is not water resistant and should not be exposed to
    excess water.


    Indoor Unit

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.


Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für LG ARNU07GSEL1 wenn:

Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.

Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von LG ARNU07GSEL1 in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 2,22 mb groß.


Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von LG ARNU07GSEL1

LG ARNU07GSEL1 Bedienungsanleitung - Deutsch - 15 seiten

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.