Zoom out
Zoom in
Vorherige Seite
1/31
Nächste Seite
ENGLISH
LG Room
Air Conditioner
OWNER'S MANUAL
LG
MODELS: SP2 Chassis
IMPORTANT
• Please read this owner's manual carefully and thoroughly
before installing and operating your room air conditioner.
• Please retain this owner's manual for future reference after
reading it thoroughly.
Prior to installation, this air-
conditioning unit must be
submitted for approval by the
utility service which provides
electricity (EN 61000-2,
EN 61000-3 Norm).
website http://www.lgservice.com
ITALIANO ESPAÑOL FRANÇAIS DEUTSCH GREEK
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    website http://www.lgservice.com

    ITALIANO

    LG Room
    Air Conditioner
    OWNER'S MANUAL
    MODELS: SP2 Chassis

    ENGLISH

    LG

    ESPAÑOL

    Prior to installation, this airconditioning unit must be
    submitted for approval by the
    utility service which provides
    electricity (EN 61000-2,
    EN 61000-3 Norm).

    FRANÇAIS
    DEUTSCH
    • Please read this owner's manual carefully and thoroughly
    before installing and operating your room air conditioner.
    • Please retain this owner's manual for future reference after
    reading it thoroughly.

    GREEK

    IMPORTANT



  • Page 2

    Room Air Conditioner Owner’s Manual

    TABLE OF CONTENTS
    Safety Precautions.........................3

    FOR YOUR RECORDS
    Write the model and serial numbers here:
    Model #

    Prior to Operation ..........................9

    Serial #
    You can find them on a label on the side of each unit.
    Dealer's Name

    Introduction ..................................10

    Electrical Safety ...........................11

    Operating Instructions.................13

    Maintenance and Service ............27

    Date Purchased
    ■ Staple your receipt to this page in the event you need
    it to prove date of purchase or for warranty issues.

    READ THIS MANUAL
    Inside you will find many helpful hints on how to use
    and maintain your air conditioner properly. Just a little
    preventive care on your part can save you a great deal
    of time and money over the life of your air conditioner.
    You'll find many answers to common problems in the
    chart of troubleshooting tips. If you review our chart of
    Troubleshooting Tips first, you may not need to call
    for service at all.

    PRECAUTION
    • Contact the authorized service technician for
    repair or maintenance of this unit.
    • Contact the installer for installation of this unit.
    • The air conditioner is not intended for use by
    young children or invalids without supervision.
    • Young children should be supervised to ensure
    that they do not play with the air conditioner.
    • When the power cord is to be replaced,
    replacement work shall be performed by
    authorized personnel only using only genuine
    replacement parts.
    • Installation work must be performed in
    accordance with the National Electric Code by
    qualified and authorized personnel only.

    2 Room Air Conditioner



  • Page 3

    Safety Precautions

    Safety Precautions

    This symbol indicates the possibility of death or serious injury.
    This symbol indicates the possibility of injury or damage to properties only.
    ■ The meanings of the symbols used in this manual are as shown below.

    Be sure not to do.
    Be sure to follow the instruction.

    ■ Installation
    Do not use damaged power
    cords, plugs, or a loose
    socket.
    • There is risk of fire or electric
    shock.

    Install the panel and the
    cover of control box
    securely.
    • There is risk of fire or electric
    shock.

    For electrical work, contact
    the dealer, seller, a qualified
    electrician, or an Authorized
    Service Center.
    • There is risk of fire or electric
    shock.

    Do not modify or extend the
    power cord.
    • There is risk of fire or electric
    shock.

    Always use the power plug
    and socket with the ground
    terminal.
    • There is risk of electric shock.

    Do not install, remove, or
    re-install the unit by
    yourself (customer).
    • There is risk of fire, electric
    shock, explosion, or injury.

    Owner's Manual 3

    ENGLISH

    To prevent the injury of the user or other people and property damage, the following instructions must be
    followed.
    ■ Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified
    by the following indications.



  • Page 4

    Safety Precautions

    Be cautious when
    unpacking and installing
    the product.
    • Sharp edges could cause injury.
    Be especially careful of the
    case edges and the fins on the
    condenser and evaporator.

    Be sure the installation area
    does not deteriorate with
    age.
    • If the base collapses, the air
    conditioner could fall with it, causing
    property damage, product failure,
    and personal injury.

    For installation, always
    contact the dealer or an
    Authorized Service Center.
    • There is risk of fire, electric
    shock, explosion, or injury.

    Do not install the product
    on a defective installation
    stand.
    • It may cause injury, accident, or
    damage to the product.

    Do not let the air conditioner
    run for a long time when the
    humidity is very high and a
    door or a window is left open.
    • Moisture may condense and
    wet or damage furnishings.

    ■ Operation
    Take care to ensure that
    power cords could not be
    pulled out or damaged
    during operation.

    Do not place anything on
    the power cord.

    Do not turn the
    air-conditioner ON or OFF
    by plugging or unplugging
    the power plug.

    • There is risk of fire or electrical
    shock.

    • There is risk of fire or electric
    shock.

    • There is risk of fire or electrical
    shock.

    4 Room Air Conditioner



  • Page 5

    Safety Precautions

    Use a dedicated outlet for
    this appliance.

    Grasp the plug to remove
    the cord from the outlet. Do
    not touch it with wet hands.

    Do not place a heater or
    other appliances near the
    power cable.

    • There is risk of fire or electrical
    shock.

    • There is risk of fire and electric
    shock.

    Do not allow water to run
    into electric parts.

    Do not store or use
    flammable gas or
    combustibles near the air
    conditioner.

    Do not use the product in a
    tightly closed space for a
    long time.

    • It may cause There is risk of
    fire, failure of the product, or
    electric shock.

    • There is risk of fire or failure of
    product.

    • Oxygen deficiency could occur.

    x
    Wa Thinner

    When flammable gas leaks,
    turn off the gas and open a
    window for ventilation
    before turn the product on.
    DO NOT use the telephone
    or turn switches on or off.

    Unplug the unit if strange
    sounds, odors, or smoke
    comes from it.

    • There is risk of explosion or fire.

    • There is risk of electrical shock
    or fire

    Stop operation and close
    the window in storm or
    hurricane. If possible,
    remove the air conditioner
    from the window before the
    hurricane arrives.
    • There is risk of property
    damage, failure of product, or
    electric shock.

    Owner's Manual 5

    ENGLISH

    • There is risk of fire or electrical
    shock.



  • Page 6

    Safety Precautions

    Do not open the inlet grill of
    the product during
    operation. (Do not touch the
    electrostatic filter, if the unit
    is so equipped.)
    • There is risk of physical injury,
    electric shock, or product
    failure.

    Unplug the appliance before
    performing cleaning or
    maintenance.
    • There is risk of electrical shock.

    When the product is soaked
    (flooded or submerged),
    contact an Authorized
    Service Center.
    • There is risk of fire or eletric
    shock.

    When the product is not be
    used for a long time,
    disconnect the power supply
    plug or turn off the breaker.
    • There is risk of product damage
    or failure, or unintended
    operation.

    Ventilate the product from
    time to time when operating
    it together with a stove, etc.

    • There is risk of fire or electrical
    shock.

    Take care to ensure that
    nobody could step on or fall
    onto the outdoor unit.
    • This could result in personal
    injury and product damage.

    ■ Installation
    Always check for gas
    (refrigerant) leakage after
    installation or repair of
    product.
    • Low refrigerant levels may
    cause failure of product.

    Install the drain hose to
    ensure that water is drained
    away properly.
    • A bad connection may cause
    water leakage.

    Keep level even when
    installing the product.

    • To avoid vibration or water
    leakage.

    90˚

    6 Room Air Conditioner



  • Page 7

    Safety Precautions

    Do not install the product
    where the noise or hot air
    from the outdoor unit could
    damage the neighborhoods.

    • Avoid personal injury.

    Do not install the product
    where it will be exposed to
    sea wind (salt spray)
    directly.
    • It may cause corrosion on the
    product. Corrosion, particularly on
    the condenser and evaporator fins,
    could cause product malfunction
    or inefficient operation.

    ■ Operation
    Do not direct airflow at
    room occupants. (Don't sit
    in the draft.)

    Do not use the product for
    special purposes, such as
    preserving foods, works of
    art, etc. It is a consumer air
    conditioner, not a precision
    refrigeration system.

    • This could damage your health.

    • There is risk of damage or loss
    of property.

    Use a soft cloth to clean. Do
    not use harsh detergents,
    solvents, etc.

    Do not touch the metal
    parts of the product when
    removing the air filter. They
    are very sharp!

    • There is risk of fire, electric
    shock, or damage to the plastic
    parts of the product.

    • There is risk of personal injury.

    Do not block the inlet or
    outlet of air flow.

    • It may cause product failure.

    Do not step on or put
    anyting on the product.
    (outdoor units)
    • There is risk of personal injury
    and failure of product.

    Owner's Manual 7

    ENGLISH

    • It may cause a problem for your
    neighbors.

    Use two or more people to
    lift and transport the air
    conditioner.



  • Page 8

    Safety Precautions

    Always insert the filter
    securely. Clean the filter
    every two weeks or more
    often if necessary.
    • A dirty filter reduces the
    efficiency of the air conditioner
    and could cause product
    malfunction or damage.

    Do not insert hands or other
    objects through the air inlet
    or outlet while the air
    conditioner is plugged in.
    • There are sharp and moving
    parts that could cause personal
    injury.

    Use a firm stool or ladder when cleaning or
    maintaining the air conditioner.

    • Be careful and avoid personal injury.

    Do not drink the water
    drained from the unit.

    • It is not sanitary and could
    cause serious health issues.

    Replace the all batteries in the remote
    control with new ones of the same type. Do
    not mix old and new batteries or different
    types of batteries.
    • There is risk of fire or explosion

    ■ Disuse
    Do not recharge or disassemble the
    batteries. Do not dispose of batteries in a
    fire.
    • They may burn or explode.

    8 Room Air Conditioner

    If the liquid from the batteries gets onto
    your skin or clothes, wash it well with clean
    water. Do not use the remote if the batteries
    have leaked.
    • The chemicals in batteries could cause burns or
    other health hazards.



  • Page 9

    Safety Precautions

    Prior to Operation
    Preparing for Operation

    Usage
    1. Being exposed to direct airflow for a long time may be hazardous to your health. Do not expose
    occupants, pets, or plants to direct airflow for a long time.
    2. Due to the possibility of oxygen deficiency, ventilate the room when using the appliance together with
    stoves or other heating devices.
    3. Do not use this air conditioner for non-specified special purpose (e.g. preserving precision devices,
    food, pets, plants, or art objects). Such use may damage your properties.

    Cleaning and Maintenance
    1. Do not touch the metal parts of the unit when removing the filter. Injury can occur.
    2. Do not use water to clean inside the air conditioner. Exposure to water can destroy the insulation,
    leading to electric shock.
    3. When cleaning the unit, first make sure that the power and breaker are turned off. The fan rotates at a
    very high speed during operation. There is a possibility of injury if the unit’s power is triggered while
    cleaning inner parts of the unit.

    Service
    For repair and maintenance, contact your authorized service dealer.

    Owner's Manual 9

    ENGLISH

    1. Contact an installation specialist for installation.
    2. Plug in the power plug properly.
    3. Use a dedicated circuit.
    4. Do not use an extension cord.
    5. Do not start/stop operation by plugging/unplugging the power cord.
    6. If the cord/plug is damaged, replace it with only an authorized replacement part.



  • Page 10

    Introduction

    Introduction
    Symbols used in this Manual
    This symbol alerts you to the risk of electric shock.
    This symbol alerts you to hazards that may cause harm to the
    air conditioner.
    NOTICE

    This symbol indicates special notes.

    Features
    WARNING: This appliance should be installed in accordance with national wiring
    regulations. This guide acts as a guide to help to explain product features.

    Indoor
    NEO Plasma Filter

    Signal Receptor
    Front Panel
    Air Filter
    Power Cord
    Air Discharge

    Outdoor
    Air Intake Vents

    Air Intake Vents

    Connecting
    Wires

    Connecting
    Wires
    Air Outlet Vents

    Piping
    Drain Hose

    Piping
    Drain Hose

    Base Plate

    10 Room Air Conditioner

    Air Outlet Vents

    Base Plate



  • Page 11

    Electrical Safety

    Electrical Safety

    To minimize the risk of electric shock, you must alway plug into a grounded oulet.

    Preferred method

    Ensure proper ground
    exists before use

    WARNING: Do not cut or remove the grounding prong from the
    power plug.
    WARNING: Attaching the adapter ground terminal to the wall
    receptacle cover screw does not ground the appliance unless the
    cover screw is metal and not insulated, and the wall receptacle is
    grounded through the house wiring.
    WARNING: If you have any doubt whether the air conditioner is
    properly grounded, have the wall receptacle and circuit checked by
    a qualified electrician.

    Owner's Manual 11

    ENGLISH

    WARNING: This appliance must be properly grounded.



  • Page 12

    Electrical Safety

    Temporary Use of an Adapter
    We strongly discourage the use of an adapter due to potential safety hazards. For temporary
    connections, use only a UL-listed adapter, available from most local hardware stores. Ensure that the
    large slot in the adapter is aligned with the large slot in the receptacle for a proper polarity connection.
    To disconnect the power cord from the adapter, use one hand on each to avoid damaging the ground
    terminal. Avoid frequently unplugging the power cord as this can lead to eventual ground terminal
    damage.

    Temporary method
    Adapter Plug
    Metal Screw

    Receptacle Cover

    WARNING: Never use the appliance with a broken adapter.

    Temporary Use of an Extension Cord
    We strongly discourage the use of an extension cord due to potential safety hazards. For temporary
    situations, use only CSA certified and UL listed 3-wire grounded extension cords, rated 15 A, 125 V.

    12 Room Air Conditioner



  • Page 13

    Operating Instructions

    Operating Instructions
    How to insert the Batteries
    ENGLISH

    1. Remove the battery cover by pulling it according to the arrow
    direction.
    2. Insert new batteries making sure that the (+) and (-) of battery are
    installed correctly.
    3. Reattach the cover by sliding it back into position.

    NOTICE Use 2 AAA(1.5volt) batteries.
    Do not use rechargeable batteries.

    Storage and Tips for using the Remote Controller
    • The remote controller may be stored by mounting
    it on a wall.

    • To operate the room air conditioner, aim the
    remote controller at the signal receptor.

    Signal receptor
    Receives the signals from the remote controller.(Signal receiving sound: two short beeps or one long beep.)

    Operation indicating lamps
    On/Off

    : Lights up during the system operation.

    Sleep Mode

    : Lights up during Sleep Mode Auto operation.

    Timer

    : Lights up during Timer operation.

    Defrost Mode

    : Lights up during Defrost Mode or *Hot
    Start operation (Heat pump model only)

    Outdoor Unit
    Operation

    : Lights up during outdoor unit operation.
    (Cooling model only)

    NEO Plasma

    : The function illustrates its dynamic mode by using a multiple lighting system.

    Operation indicating
    lamps

    *Hot Start operation: Stops the indoor fan in Heating Operation to prevent cold air from blowing out from unit.

    Owner's Manual 13



  • Page 14

    Operating Instructions

    Remote Control Operations
    The controls will look like the following.

    Controls
    Signal transmitter

    5

    1

    6
    3
    4
    2
    7
    11
    8
    13

    10
    CANCEL
    ON

    OFF

    9
    12

    SET
    AUTO CLEAN

    17
    14

    15

    16

    Flip-up door
    (opened)

    Operation Mode
    Cooling Operation
    Auto Operation or Auto Changeover

    Healthy Dehumidification Operation
    Heating Operation

    • Cooling Model(

    ), Heat Pump Model(

    )

    1. START/STOP BUTTON
    Operation starts when this button is pressed
    and stops when the button is pressed again.
    2. OPERATION MODE SELECTION BUTTON
    Used to select the operation mode.
    3. ROOM TEMPERATURE SETTING
    BUTTONS
    Used to select the room temperature.
    4. INDOOR FAN SPEED SELECTOR
    Used to select fan speed in four steps
    low, medium, high and CHAOS.
    5. JET COOL/HEATING(OPTIONAL)
    Used to start or stop the speed
    cooling/heaing.(speed cooling/heating operates
    super high fan speed in cooling/heatig mode.)
    6. CHAOS SWING BUTTON
    Used to stop or start louver movement and
    set the desired up/down airflow direction.
    7. ON/OFF TIMER BUTTONS
    Used to set the time of starting and stopping
    operation. (See page 24)
    8. TIME SETTING BUTTONS
    Used to adjust the time. (See page 24)
    9. TIMER SET/CANCEL BUTTON
    Used to set the timer when the desired time
    is obtained and to cancel the Timer
    operation. (See page 24)
    10. SLEEP MODE AUTO BUTTON
    Used to set Sleep Mode Auto operation.
    (See page 24)
    11. AIR CIRCULATION BUTTON
    Used to circulate the room air without
    cooling or heating. (See page 25)
    12. ROOM TEMPERATURE CHECKING
    BUTTON
    Used to check the room temperature.
    13. NEO PLASMA(OPTIONAL)
    Used to start or stop the
    plasma-purification function. (See page 22)
    14. HORIZONTAL AIRFLOW DIRECTION
    CONTROL BUTTON (OPTIONAL)
    Used to set the desired vertical airflow
    direction.
    15. RESET BUTTON
    Used prior to resetting time.
    16. 2nd F Button
    Used prior to using modes printed in blue
    at the bottom of buttons. (See page 23)
    17. AUTO CLEAN (OPTIONAL)
    Used to set Auto Clean mode.

    14 Room Air Conditioner



  • Page 15

    Operating Instructions

    Cooling operation

    ENGLISH

    1

    Press the Start/Stop button.
    The unit will respond with
    a beep.

    2

    Open the door of the remote controller. To select Cooling
    Operation, press the Operation Mode Selection button.
    Each time the button is pressed, the operation mode is
    shifted in the direction of the arrow.

    Cooling

    3
    ON

    Auto

    Healthy
    Dehumidification

    Heating
    (Heat pump model only)

    Close the door of the remote controller. Set the temperature
    lower than the room temperature. The temperature can be
    set within a range of 18°C~30°C at intervals of 1°C.
    To raise the temperature

    To lower the temperature

    4

    Set the fan speed again with the door
    of the remote controller still closed.
    You can select the fan speed in four
    steps-low, medium, high and CHAOS.
    Each time the button is pressed, the
    fan speed mode is shifted.

    Natural wind by the CHAOS logic
    ❏ For fresher feeling, press the Indoor fan speed selector and set to CHAOS mode. In this mode, the wind
    blows like a natural breeze by automatically changing fan speed according to the CHAOS logic.

    Owner's Manual 15



  • Page 16

    Operating Instructions

    Auto operation (Cooling model only)

    1

    Press the Start/Stop button.
    The unit will respond with
    a beep.

    2

    Open the door of the remote controller. To select Auto
    Operation, press the operation mode selection button.
    Each time the button is pressed, the operation mode is
    shifted in the direction of the arrow.

    Cooling

    ON

    3

    Auto

    Healthy
    Dehumidification

    Heating
    (Heat pump model only)

    The temperature and fan speed are automatically set by the
    electronic controls based on the actual room temperature. If
    you want to change the set temperature, press the Room
    Temperature Setting buttons. The cooler or warmer you feel,
    the more times (up to two times) you should press the button.
    The set temperature will be changed automatically.

    To raise the temperature

    To lower the temperature

    During Auto Operation
    ❏ You cannot control the indoor fan speed. It has already been set by the Fuzzy rule.
    ❏ If the system is not operating as desired, manually switch to another mode. The system will not
    automatically switch from the cooling mode to the heating mode, or from heating mode to cooling
    mode, it must be done by manually resetting.
    ❏ During Auto Operation, pressing the chaos swing button makes the horizontal louvers swing up and
    down automatically. If you want to stop auto-swing, press the chaos swing button again.

    16 Room Air Conditioner



  • Page 17

    Operating Instructions

    Auto changeover operation(Heat pump model only)

    ENGLISH

    1

    Press the Start/Stop button.
    The unit will respond with
    a beep.

    2

    Open the door of the remote controller. To select Auto Changeover
    Operation, press the Operation Mode Selection button.
    Each time the button is pressed, the operation mode is shifted in the
    direction of the arrow.

    Cooling

    3

    Auto
    changeover

    Healthy
    Dehumidification

    Heating
    (Heat pump model only)

    Close the door of the remote controller. Set the temperature
    lower than the room temperature. The temperature can be
    set within a range of 18°C~30°C at intervals of 1°C.
    To raise the temperature

    ON

    To lower the temperature

    4

    Set the fan speed again with the door
    of the remote controller still closed.
    You can select the fan speed in four
    steps-low, medium, high and CHAOS.
    Each time the button is pressed, the
    fan speed mode is shifted.

    During Auto changeover Operation
    The air conditioner changes the operation mode automatically to keep indoor temperature. When room
    temperature vary over ±2°C with respect to setting temperature, air conditioner keeps the room
    temperature within ±2°C with respect to setting temperature by auto changeover mode.

    Owner's Manual 17



  • Page 18

    Operating Instructions

    Healthy dehumidification operation

    1

    Press the Start/Stop button.
    The unit will respond with
    a beep.

    2

    Open the door of the remote controller. To select Healthy
    Dehumidification Operation, press the Operation Mode
    Selection button.
    Each time the button is pressed, the operation mode is
    shifted in the direction of the arrow.

    Cooling

    3
    ON

    Auto

    Healthy
    Heating
    Dehumidification (Heat pump model only)

    Set the fan speed again with the door
    of the remote controller still closed.
    You can select the fan speed in four
    steps-low, medium, high, or CHAOS.
    Each time the button is pressed, the
    fan speed mode is shifted.

    Natural wind by the CHAOS logic
    ❏ For fresher feeling, press the Indoor Fan Speed Selector and set
    to CHAOS mode. In this mode, the wind blows like a natural
    breeze by automatically changing fan speed according to the
    CHAOS logic.

    During Healthy Dehumidification Operation
    ❏ If you select the dehumidification mode on the operation selection button, the A/C starts to run the
    dehumidification function. It automatically sets the room temp. and airflow volume to the best condition
    for dehumidification, based on the sensed current room temp.
    In this case, however, the setting temp. is not displayed on the remote controller and you are not able to
    control the room temp. either.
    ❏ During the healthy dehumidification function, the airflow volume is automatically set according to the
    optimization algorithm responding to the current room temp. status, so that the room condition is kept
    healthy and comfortable even in the very humid season.

    18 Room Air Conditioner



  • Page 19

    Operating Instructions

    Heating operation (Heat pump model only)

    ENGLISH

    1

    Press the Start/Stop button.
    The unit will respond with
    a beep.

    2

    Open the door of the remote controller. To select Heating
    Operation, press the Operation Mode Selection button.
    Each time the button is pressed, the operation mode is
    shifted in the direction of the arrow.

    Cooling

    3
    ON

    Auto

    Heating
    Healthy
    (Heat pump model only)
    Dehumidification

    Close the door of the remote controller.
    Set the temperature higher than the room temperature.
    The temperature can be set within a range of 16°C~30°C at
    intervals of 1°C.
    To raise the temperature

    To lower the temperature

    4

    Set the fan speed again with the door of the
    remote controller still closed. You can
    select the fan speed in four steps–low,
    medium, high and CHAOS. Each time the
    button is pressed, the fan speed mode is
    shifted.

    Natural wind by the CHAOS logic
    ❏ For fresher feeling, press the Indoor Fan Speed Selector and set to CHAOS mode. In this mode, the
    wind blows like a natural breeze by automatically changing fan speed according to the CHAOS logic.

    Owner's Manual 19



  • Page 20

    Operating Instructions

    Jet cool operation

    1

    Press the Start/Stop button.
    The unit will respond with
    a beep.

    2

    Press the Jet Cool button to operate
    the speed cooling mode and the unit
    will operate at super high fan speed
    on cooling mode for 30 minutes.

    3

    To cancel the Jet Cool mode, press the Jet Cool button, the
    fan speed button or the room temperature setting button
    again and the unit will operate at high fan speed on cooling
    mode.

    or

    or

    NOTICE
    ❏ During the JET COOL function at any moment, the A/C starts to blow the cool air at extremely
    high speed for 30 minutes setting the room temp. automatically to 18°C. It is especially used to
    cool the room temp. quickly in a hot summer.
    In heat pump mode, neuro fuzzy mode, or auto changeover mode however, the JET COOL
    function is not available.
    ❏ In order to return to the normal cooling mode from the JET COOL mode, just press the operation
    mode selection button, airflow volume selection, temp. setting button or the JET COOL button
    again.

    20 Room Air Conditioner



  • Page 21

    Operating Instructions

    Jet heat operation (Optional)

    ENGLISH

    1

    Press the Start/Stop button.
    The unit will respond with
    a beep.

    2

    Open the door of the remote controller.
    To select Heating Operation.

    Cooling

    Auto
    changeover

    Healthy
    Dehumidification

    Heating
    (Heat pump model only)

    3

    Press the Jet Heat button to operate the
    speed heating mode and the unit will
    operate at super high fan speed on heating
    mode for 60 minutes.

    4

    To cancel the Jet Heat mode, press the Jet Heat button,
    the fan speed button or the room temperature setting
    button again and the unit will operate at high fan speed on
    heating mode.

    ON

    or

    or

    NOTICE

    ❏ During the JET HEAT function at any moment, the A/C starts to blow the heat air at extremely high speed for
    60 minutes setting the room temp. automatically to 30°C. It is especially used to heat the room temp. quickly
    in a cool winter.
    On cooling, healthy dehumidification mode or auto changeover mode, however, the JET HEAT function is not
    available.
    ❏ In order to return to the normal heating mode from the JET HEAT mode, just press the operation mode
    selection button, airflow volume selection, temp. setting button or the JET HEAT button again.

    Owner's Manual 21



  • Page 22

    Operating Instructions

    NEO PLASMA purification operation(Optional)

    1

    Press the Start/Stop button.
    The unit will respond with a
    beep.

    2

    Open the door of the remote
    controller. Press the PLASMA
    button.
    Operation will start when the button
    is pressed and stop when the button
    is pressed again.

    3

    Set the fan speed again with the door of the remote
    controller closed. You can select the fan speed in four
    steps-low, medium, high or CHAOS.
    Each time the button is pressed, the fan
    speed mode is shifted.
    ❈ Air purifying operation (PLASMA) can be
    with cooling, Heating or any other operations.

    NEO PLASMA Air Purifying Operation only
    If you press the only PLASMA button, only
    PLASMA purification function operates.
    Then, fan speed is low. You can select the fan
    speed in four steps-low, medium, high or
    CHAOS.
    Each time the button (
    ) is pressed, the fan
    speed mode is shifted.

    22 Room Air Conditioner



  • Page 23

    Operating Instructions

    2nd F operation

    ENGLISH

    1

    Press the Start/Stop button.
    The unit will respond with
    a beep.

    2

    Open the door of the remote control and press the 2nd
    Function button to operate functions printed in blue unter
    buttons.
    (Check the indication of 2nd function on the display of the
    remote controller.)
    These buttons can set the timer as follows:

    ON

    OFF

    SET

    CANCEL
    ON

    OFF

    SET
    AUTO CLEAN

    3

    2nd function disappears in a short time automatically or when
    the button is pressed again.

    For more details, refer to functions next pages.

    Owner's Manual 23



  • Page 24

    Operating Instructions

    Additional Features
    Sleep mode
    1. Press the Sleep Mode Auto button to set the time you want the unit to stop automatically.
    2. The Timer is programmed in one-hour increments by pressing the Sleep Mode Auto button 1 to 7 times. The
    sleep mode is available for 1 to 7 times. To alter the time period in steps of 1 hour, press the Sleep Mode
    Button while aiming at air conditioner.
    3. Make sure the Sleep Mode Auto LED lights up.
    To cancel the Sleep Mode, press the sleep Mode Auto button several times until the star
    (
    ) disappears from the operation display.
    NOTICE The Sleep Mode will be operated at slow fan speed (cooling) or medium fan speed (heat pump
    only) for a comfortable sleep.
    In cooling mode or healthydehumidification mode:
    The temperature will automatically rise by 1°C over the next 30 minutes and by 2°C in 1 hour for a comfortable
    sleep.

    Setting the time
    1. Time can be set only when you press the Reset button. Having replacing the batteries,
    you should press the reset buttons to reset the time. Press the Start/Stop button.
    2. Press 2nd F button and check if 2nd F icon is on.
    3. Press the Time Setting buttons until the desired time is set.
    CANCEL

    4. Press the Timer SET button.
    SET

    NOTICE

    Check the indicator for A.M. and P.M.

    Delay start/Pre-set stop
    1. Make sure the time is set correctly on the display of the remote controller.
    2. Press 2nd F button.
    3. Press the ON/OFF Timer buttons to turn Timer on or off.

    ON

    OFF

    4. Press the Time Setting buttons until the desired time is set.
    CANCEL

    5. To set the selected time, press the Timer setting button aiming the remote controller at the
    signal receptor.
    To cancel the timer setting
    Check if 2nd F icon is off.
    Press the Timer Cancel button aiming the remote controller at the signal receptor.
    (The timer lamp on the air conditioner and the display will go out.)
    NOTICE

    Select one of the following four types of operation.

    Delay OFF Timer

    24 Room Air Conditioner

    Delay ON Timer

    SET

    CANCEL
    SET

    with the unit running

    Delay OFF and ON Timer Delay ON and OFF Timer



  • Page 25

    Operating Instructions

    Airflow direction control
    Press Chaos Swing button and the louvers will swing.

    Press the button again and the louvers will stop. After
    30 minutes, the louvers return to the maximum airflow
    position automatically.

    Press the Start/Stop button to start the unit.

    Air circulation mode
    Circulates the room air without cooling or heating.
    1. Press the Start/Stop button. the unit will respond with a beep.
    2. Open the door on the remote control. Press the Air Circulation button. Close the door on the remote control.
    Now each time that you press the Indoor Fan Speed Selector, the fan speed is shifted from low to CHAOS
    and back to low again.

    CHAOS Air

    NOTICE

    Fan speed is on low.

    Fan speed is on medium.

    Fan speed is on high.

    CHAOS Air economizes power consumption and prevents overcooling. The fan speed is
    automatically changed from high to low or vice versa, depending on the ambient temperature.

    Auto clean
    AUTO CLEAN

    1. Whenever you press the Auto Clean button, Auto Clean Function will be reserved and cancelled.
    2. Auto Clean function works before and after cooling or dehumidification mode. For details, refer to
    the below points.
    3. When the unit is started after the reservation of Auto Clean ,the Cool Start function operates and
    indoor Fan is started after 20 seconds.
    4. When you press Start/Stop button to turn off the unit after the you have reserved Auto Clean
    function, the air-conditioner circulates the indoor air in the Auto Clean mode with no more
    Cooling or Dehumidification operation. For Cooling only model, it lasts for 30 minutes for Heat
    pump model, for 16 minutes.
    5. If you press the auto clean button again during the product operation , Auto Clean function will be
    cancelled.

    NOTICE

    ❏ During Auto Clean function, moistures left in indoor units after Cooling Operation or Healthy
    Dehumidification Operation can be removed.
    ❏ During Auto Clean function, only Start/Stop button, Plasma button and Auto Clean button are available.

    Owner's Manual 25

    ENGLISH

    The up/down and right/left airflow can be adjusted by
    using the remote control.



  • Page 26

    Operating Instructions

    Forced operation
    Operation procedures when the remote control can't be used.
    The operation will be started if the power button is pressed.
    If you want to stop operation, re-press the button.

    Power button

    Cooling Model
    Operating mode
    Indoor FAN Speed
    Setting Temperature

    Cooling
    High
    22°C

    Room Temp. ≥ 24°C

    Heat pump Model
    21°C ≤ Room Temp. < 24°C

    Room Temp. < 21°C

    Cooling
    High
    22°C

    Healthy Dehumidification
    High
    23°C

    Heating
    High
    24°C

    Test operation
    During the TEST OPERATION, the unit operates in cooling mode at high speed fan, regardless of room
    temperature and resets in 18 minutes.
    During test operation, if remote controller signal is received, the unit operates as remote controller sets.
    If you want to use this operation, Press and hold the ON/OFF button for 3~5 seconds, then the buzzer sound 1
    "beep".
    If you want to stop the operation, re-press the button.

    Auto restart
    In case the power comes on again after a power failure, Auto Restarting Operation is the function to operate
    procedures automatically to the previous operating conditions.
    So there is no need of activating this function by pressing any key or button.
    In the initial mode, the fan operates at a low speed and the compressor starts 2.5~3 minutes later.
    As the compressor starts, the fan speed also resumes its previous setting mode.

    Helpful information

    High
    Speed

    Fan speed and cooling capacity.
    The cooling capacity indicated in the specification is the value
    when the fan speed is set to high, and the capacity will be lower
    at low or medium fan speed.
    High fan speed is recommended when you wish to cool the room
    quickly.

    NOTICE
    Auto restart function has set enable as factory default.
    But customer can set up by following this instruction.
    To be disable function
    - Press and hold the ON/OFF button for 6 seconds, then the buzzer sound 2 "beep" and the indicator lamp (1)
    blinks 4 times.
    To be enable function
    - Press and hold the ON/OFF button for 6 seconds, then the buzzer sound 2 "beep" and the indicator lamp (1)
    brights 4 times.

    26 Room Air Conditioner



  • Page 27

    Maintenance and Service

    Maintenance and Service
    Indoor Unit

    NOTICE

    Supply power must be disconnected before cleaning the indoor unit.

    Air filter
    The air filters behind the front grill should be checked and cleaned once
    every 2 weeks or more often if neccessary.
    1. Lift the front panel. After lifting up the filter tab a bit, take the filter
    out slowly
    NOTICE

    Filter

    Clean the filter after stopping the product.

    2. Clean the filter with a vacuum or warm, soapy water.
    • If dirt is conspicuous, wash with a solution of detergent in lukewarm water.
    • If hot water (40°C or more) is used, it may be deformed.
    3. After washing with water, dry well in the shade.
    4. Re-install the air filter.
    Filter

    Never use any of the followings:
    • Water hotter than 40°C.
    Could cause deformation and/or discoloration.
    • Volatile substances
    Could damage the surfaces of the air conditioner.

    Outdoor Unit
    The heat exchanger coils and panel vents of the outdoor unit should be checked regularly.
    If clogged with dirt or soot, the heat exchanger
    and panel vents may be professionally steam cleaned.
    NOTICE

    Dirty or clogged coils will reduce the
    operating efficiency of the system and cause Air intake (Side)
    vents
    higher operating costs.

    (Rear)
    Piping
    Drain Hose

    Air outlet
    vents

    (Rear)

    Air intake
    vents
    Air outlet
    vents

    (Rear)

    (Side)
    Piping
    Drain Hose

    Air intake
    vents

    (Side)
    Piping
    Drain Hose

    Air outlet
    vents

    Owner's Manual 27

    ENGLISH

    WARNING: Turn the system off before cleaning. To clean, wipe with a soft, dry cloth.
    Do not use bleach or abrasives.



  • Page 28

    Maintenance and Service

    Cleaning Filter
    • Recomended use period : About 3 months
    1. Lift the front panel, hold it up and pull the Air filter.

    Front Panel
    Air Filter

    2. Remove the Plasma Filter.

    WARNING: Don't touch the PLASMA Filter
    within 10 seconds after opening the inlet
    grille, it may cause electric shock.

    Plasma Purifier
    Filter

    3. Put the Plasma Filter into the neutral detergent for 1~2
    hours and then raise it.

    4. Insert the Plasma Filter after perfectly drying it in shade.
    Now insert Air Filter and close the front panel completely
    by matching the hook.

    Front Panel Hook

    Air Filter
    Air Filter

    28 Room Air Conditioner

    Hook-Hanger



  • Page 29

    Maintenance and Service

    Common Problems and Solutions
    Before calling for service

    Air conditioner does not operate
    1. Ensure that the air conditioner is plugged into a proper outlet.
    2. Check the fuse or circuit breaker.
    3. Check whether the voltage is unusually high or low.
    Air does not feel cold enough on the cooling setting
    1. Ensure that the temperature settings are correct.
    2. Check to see if the air filter is clogged with dust. If so, replace the filter.
    3. Ensure that the air flow from the outside is not obstructed and that there is a clearance of
    over 20" between the back of the air conditioner and the wall or fence behind it.
    4. Close all doors and windows and check for any source of heat in the room.

    Before calling for service, please review the following list of common problems and
    solutions.
    The air conditioner is operating normally when:
    • You hear a pinging noise. This is caused by water being picked up by the fan on rainy days
    or in highly humid conditions. This feature is designed to help remove moisture in the air
    and improve cooling efficiency.
    • You hear the thermostat click. This is caused by the compressor cycle starting and
    stopping.
    • You see water dripping from the rear of the unit. Water may be collected in the base pan in
    highly humid conditions or on rainy days. This water overflows and drips from the rear of
    the unit.
    • You hear the fan running while the compressor is silent. This is a normal operational
    feature.

    Owner's Manual 29

    ENGLISH

    If you have problems with your air conditioner, read the following information and try to solve
    the problem. If you cannot find a solution, turn off the air conditioner and contact your dealer.



  • Page 30

    Maintenance and Service

    Troubleshooting
    The air conditioner may be operating abnormally when:
    Problem

    Air
    conditioner
    does not start

    Air
    conditioner
    does not cool
    as it should

    Air
    conditioner
    freezing up

    Possible Causes

    What To Do

    ■ The air conditioner is
    unplugged.

    • Make sure the air conditioner plug is
    pushed completely into the outlet.

    ■ The fuse is blown/circuit
    breaker is tripped.

    • Check the house fuse/circuit breaker
    box and replace the fuse or reset the
    breaker.

    ■ Power failure.

    • If power failure occurs, turn the mode
    control to Off.
    When power is restored, wait 3
    minutes to restart the air conditioner
    to prevent tripping of the compressor
    overload.

    ■ Airflow is restricted.

    • Make sure there are no curtains,
    blinds, or furniture blocking the front of
    the air conditioner.

    ■ The thermostat may not be
    set high enough.

    • Turn the knob to a higher number.
    The highest setting provides
    maximum cooling.

    ■ The air filter is dirty.

    • Clean the filter at least every 2 weeks.
    See the care and Maintenance
    section.

    ■ The room may have been
    hot.

    • When the air conditioner is first turned
    on, you need to allow time for the
    room to cool down.

    ■ Cold air is escaping.

    • Check for open furnace floor registers
    and cold air returns.

    ■ Cooling coils have iced up.

    • See Air Conditioner Freezing Up
    below.

    ■ Ice blocks the air flow and
    stops the air conditioner from
    cooling the room.

    • Set the mode control at High Fan or
    High Cool with thermostat at 1 or 2.

    * You can refer to the Energy Star program in detail at www.energystar.gov.

    30 Room Air Conditioner



  • Page 31

    P/No.: 3828A20534G






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für LG ASUH126 PML2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von LG ASUH126 PML2 in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 2,74 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von LG ASUH126 PML2

LG ASUH126 PML2 Bedienungsanleitung - Deutsch - 31 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info