Zoom out
Zoom in
Vorherige Seite
1/38
Nächste Seite
www.lg.com
OWNER'S MANUAL
AIR
CONDITIONER
Read this owner's manual thoroughly before operating the appliance and keep
it handy for reference at all times.
TYPE: WALL MOUNTED
Original instruction
EN English
Copyright © 2018 LG Electronics Inc. All Rights Reserved.
P/NO: 5401156188 rev.:
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    OWNER'S MANUAL

    AIR
    CONDITIONER

    Read this owner's manual thoroughly before operating the appliance and keep
    it handy for reference at all times.
    TYPE: WALL MOUNTED
    Original instruction
    EN

    English

    www.lg.com
    P/NO: 5401156188 rev.:

    Copyright © 2018 LG Electronics Inc. All Rights Reserved.



  • Page 2

    TABLE OF CONTENTS

    This manual may contain images or
    content different from the model you
    purchased.
    This manual is subject to revision by the
    manufacturer.

    SAFETY INSTRUCTIONS.................................................... 3

    IMPORTANT SAFETY INSTRUCTIONS.................................................4

    OPERATION........................................................................ 11

    Notes for Operation............................................................................... 11
    Parts and Functions............................................................................... 11
    Wireless Remote Control.......................................................................12
    Restarting the Air Conditioner Automatically.........................................17
    Using the Mode Function.......................................................................17
    Using the Jet Mode Function.................................................................20
    Using the Fan Speed Function..............................................................21
    Using the Air Flow Direction Function....................................................21
    Setting the On/Off Timer........................................................................22
    Using the Sleep Function (Optional)......................................................23
    Using the Simple Timer Function (Optional)..........................................23
    Using the Energy Display Function (Optional).......................................24
    Using the Light Off Function (Optional).................................................24
    Using the Comfort Air Function (Optional).............................................24
    Using the Energy Control Function (Optional).......................................25
    Using Special Functions........................................................................25

    SMART FUNCTIONS.......................................................... 27

    Using LG SmartThinQ Application.........................................................27

    MAINTENANCE................................................................... 30

    Clean the Air Filter.................................................................................32

    TROUBLESHOOTING........................................................ 33



  • Page 3

    SAFETY INSTRUCTIONS

    EN

    The following safety guidelines are intended to prevent
    unforeseen risks or damage from unsafe or incorrect
    operation of the appliance.
    The guidelines are separated into ‘WARNING’ and ‘CAUTION’
    as described below.
    This symbol is displayed to indicate matters and
    operations that can cause risk. Read the part with this
    symbol carefully and follow the instructions in order to
    avoid risk.
    WARNING
    This indicates that the failure to follow the instructions can
    cause serious injury or death.
    CAUTION
    This indicates that the failure to follow the instructions can
    cause the minor injury or damage to the product.

    The following symbols are displayed on indoor and outdoor
    units.
    This symbol indicates that this appliance uses a
    flammable refrigerant. If the refrigerant is leaked and
    exposure to an external ignition source, there is a risk
    of fire.
    This symbol indicates that the Operation Manual should
    be read carefully.
    This symbol indicates that a service personnel should
    be handling this equipment with reference to the
    Installation Manual.
    This symbol indicates that information is available such
    as the Operating Manual or Installation Manual.

    3



  • Page 4

    EN

    IMPORTANT SAFETY INSTRUCTIONS
    WARNING
    To reduce the risk of explosion, fire, death, electric shock,
    injury or scalding to persons when using this product,
    follow basic precautions, including the following:

    Children in the Household

    This appliance is not intended for use by persons (including
    children) with reduced physical, sensory or mental capabilities, or
    lack of experience and knowledge, unless they have been given
    supervision or instruction concerning use of the appliance by a
    person responsible for their safety. Children should be supervised
    to ensure that they do not play with the appliance.

    For use in Europe:

    This appliance can be used by children aged from 8 years and
    above and persons with reduced physical, sensory or mental
    capabilities or lack of experience and knowledge if they have been
    given supervision or instruction concerning use of the appliance in
    a safe way and understand the hazards involved. Children shall not
    play with the appliance. Cleaning and user maintenance shall not
    be made by children without supervision.

    Installation

    •Do
    • not install the air conditioner on an unstable surface or in a
    place where there is danger of it falling.
    •Contact

    an authorized service center when installing or relocating
    the air conditioner.
    •Install

    the panel and the cover of the control box safely.

    4



  • Page 5

    EN

    •Do
    • not install the air conditioner in a place where flammable
    liquids or gases such as gasoline, propane, paint thinner, etc., are
    stored.
    •Make

    sure that the pipe and the power cable connecting the
    indoor and outdoor units are not pulled too tight when installing
    the air conditioner.
    •Use

    standard circuit breaker and fuse that conform to the rating of
    the air conditioner.
    •Do
    • not input air or gas into the system except with the specific
    refrigerant.
    •Use

    non-flammable gas (nitrogen) to check for leak and to purge
    air; using compressed air or flammable gas may cause fire or
    explosion.
    •The

    indoor/outdoor wiring connections must be secured tightly,
    and the cable should be routed properly so that there is no force
    pulling the cable from the connection terminals. Improper or loose
    connections can cause heat generation or fire.
    •Install

    dedicated electric outlet and circuit breaker before using the
    air conditioner.
    •Do
    • not connect the ground wire to a gas pipe, a lightning rod, or a
    telephone ground wire.
    •Keep

    any required ventilation openings clear of obstruction.

    Operation

    •Be
    • sure to use only those parts listed in the service parts list.
    Never attempt to modify the equipment.
    •Make

    sure that children do not climb on or hit the outdoor unit.
    •Dispose

    of the batteries in a place where there is no danger of
    fire.
    •Use

    only the refrigerant specified on the air conditioner label.

    5



  • Page 6

    EN

    •Cut

    off the power supply if there is any noise, smell, or smoke
    coming from the air conditioner.
    •Do
    • not leave flammable substances such as gasoline, benzene, or
    thinner near the air conditioner.
    •Contact

    an authorized service center when the air conditioner is
    submerged by flood waters.
    •Do
    • not use the air conditioner for an extended period of time in a
    small place without proper ventilation.
    •In
    • the event of a gas leak (such as Freon, propane gas, LP gas,
    etc.) ventilate sufficiently before using the air conditioner again.
    •To
    • clean the interior, contact an authorized service center or
    dealer. Using harsh detergents may cause corrosion or damage to
    the unit.
    •Be
    • sure to ventilate sufficiently when the air conditioner and a
    heating appliance such as a heater are used simultaneously.
    •Do
    • not block the inlet or outlet of air flow.
    •Do
    • not insert hands or other objects through the air inlet or outlet
    while the air conditioner is operating.
    •Make

    sure that the power cable is neither dirty, loose, nor broken.
    •Never

    touch, operate, or repair the air conditioner with wet hands.
    •Do
    • not place any objects on the power cable.
    •Do
    • not place a heater or other heating appliances near the power
    cable.
    •Do
    • not modify or extend the power cable. Scratches or peeling
    insulation on the power cables may result in fire or electric shock,
    and should be replaced.
    •Cut

    off the power supply immediately in the event of a blackout or
    a thunderstorm.

    6



  • Page 7

    EN

    •Take

    care to ensure that power cable could not be pulled out or
    damaged during operation.
    •Do
    • not touch refrigerant pipe, water pipe and any internal parts
    while the unit is operating or immediately after operation.

    Maintenance

    •Do
    • not clean the appliance by spraying water directly onto the
    product.
    •Before

    cleaning or performing maintenance, disconnect the power
    supply and wait until the fan stops.

    Technical Safety

    •Installation

    or repairs made by unauthorized persons can pose
    hazards to you and others.
    •Any

    person who is involved with working on or breaking into a
    refrigerant circuit should hold a current valid certificate from an
    industry-accredited assessment authority, which authorizes their
    competence to handle refrigerants safely in accordance with an
    industry recognized assessment specification.
    •Servicing

    shall only be performed as recommended by the
    equipment manufacturer. Maintenance and repair requiring the
    assistance of other skilled personnel shall be carried out under the
    supervision of the person competent in the use of flammable
    refrigerants.
    •The

    information contained in the manual is intended for use by a
    qualified service technician who is familiar with the safety
    procedures and equipped with the proper tools and test
    instruments.
    •Failure

    to read and follow all instructions in this manual can result
    in equipment malfunction, property damage, personal injury and/or
    death.

    7



  • Page 8

    EN

    •The

    appliance shall be installed in accordance with national wiring
    regulations.
    •When

    the power cord is to be replaced, the replacement work
    shall be performed by authorized personnel using only genuine
    replacement parts.
    •This

    appliance must be properly grounded to minimize risk of
    electric shock.
    •Do
    • not cut or remove the grounding prong from the power plug.
    •Attaching

    the earth wire to the power outlet cover screw does not
    ground the appliance unless the cover screw is metal, uninsulated,
    and the power outlet is grounded through house wiring.
    •If
    • you have any doubt whether the air conditioner is properly
    grounded, have the power outlet and circuit checked by a qualified
    electrician.
    •The

    refrigerant and insulation blowing gas used in the appliance
    require special disposal procedures. Consult a service agent or a
    similarly qualified person before disposing of them.
    •If
    • the supply cord is damaged, it must be replaced by the
    manufacturer or its service agents or similarly qualified person in
    order to avoid a hazard.
    •The

    appliance shall be stored in a well-ventilated area where the
    room size corresponds to the room area as specified for
    operation.
    •The

    appliance shall be stored in a room without continuously
    operating open flames (for example an operating gas appliance)
    and ignition sources (for example an operating electric heater).
    •The

    appliance shall be stored so as to prevent mechanical
    damage from occurring.

    8



  • Page 9

    EN

    CAUTION
    To reduce the risk of minor injury to persons, malfunction,
    or damage to the product or property when using this
    product, follow basic precautions, including the following:

    Installation

    •Do
    • not install the air conditioner in an area where it is directly
    exposed to sea wind (salt spray).
    •Install

    the drain hose properly for the smooth drainage of water
    condensation.
    •Exercise

    caution when unpacking or installing the air conditioner.
    •Do
    • not touch the leaking refrigerant during installation or repair.
    •Transport

    the air conditioner with two or more people or use a
    forklift.
    •Install

    the outdoor unit such that it is protected from direct
    sunlight. Do not place the indoor unit in a place where it is directly
    exposed to sunlight via the windows.
    •Safely

    dispose of packing materials such as screws, nails or
    batteries using proper packaging after installation or repair.
    •Install

    the air conditioner in a place where the noise from the
    outdoor unit or the exhaust fumes will not inconvenience the
    neighbors. Failure to do so may result in conflict with the
    neighbors.

    Operation

    •Remove

    the batteries if the remote control is not to be used for an
    extended period of time.

    9



  • Page 10

    EN

    •Make

    sure that the filter is installed before operating the air
    conditioner.
    •Be
    • sure to check if there is a refrigerant leak after installing or
    repairing the air conditioner.
    •Do
    • not place any object on the air conditioner.
    •Never

    mix different types of batteries, or old and new batteries for
    the remote control.
    •Do
    • not let the air conditioner run for a long time when humidity is
    very high or when a door or a window has been left open.
    •Stop

    using the remote control if there is a fluid leak in the battery.
    If your clothes or skin are exposed to the leaking battery fluid,
    wash off with clean water.
    •Do
    • not expose people, animals, or plants to the cold or hot wind
    from the air conditioner for extended periods of time.
    •If
    • the leaking battery fluid has been swallowed, rinse the inside of
    the mouth thoroughly and consult a doctor.
    •Do
    • not drink the water drained from the air conditioner.
    •Do
    • not use the product for special purposes, such as preserving
    foods, works of art, and etc. It is an air conditioner for consumer
    purposes, not a precision refrigeration system. There is risk of
    damage or loss of property.
    •Do
    • not recharge or disassemble the batteries.

    Maintenance

    •Never

    touch the metal parts of the air conditioner when removing
    the air filter.
    •Use

    a sturdy stool or ladder when cleaning, maintaining, or
    repairing the air conditioner at a height.
    •Never

    use strong cleaning agents or solvents when cleaning the
    air conditioner or spray water. Use a smooth cloth.

    10



  • Page 11

    OPERATION

    EN

    Notes for Operation
    Suggestion for Energy Saving
    ••Do not over-cool the space. This may be harmful for your health and may consume more
    electricity.
    ••Block sunlight with blinds or curtains while you are operating the air conditioner.
    ••Keep doors or windows closed tightly while you are operating the air conditioner.
    ••Adjust the direction of the air flow vertically or horizontally to circulate indoor air.
    ••Speed up the fan to cool or warm indoor air quickly, within a short period of time.
    ••Open windows regularly for ventilation. The indoor air quality may deteriorate if the air conditioner
    is used for long durations.
    ••Clean the air filter once every 2 weeks. Dust and impurities collected in the air filter may block the
    air flow or reduce the unit performance.

    Parts and Functions
    Indoor Unit

    Outdoor Unit

    Indoor Display Screen

    9
    8

    1 Air Filter

    1 Air Intake Vents

    2 Air Intake

    2 Air Outlet Vents

    3 Front Cover

    3 Base Plate

    4 Air Outlet

    4 Power Supply Cable

    5 Air Deflector (Horizontal
    Vane)

    5 Drain Hose

    6 Air Deflector (Vertical Louver)

    6 Coolant Piping

    1 Desired temperature / Room
    temperature
    2 Defrosting / Preheating
    3 Wi-Fi
    4 Timer
    5 On/Off

    7 On/Off Button
    8 Display
    9 Signal Receiver

    NOTE
    ••The number and location of operation lamps may vary according to the model of the air
    conditioner.
    ••The feature may be changed according to the type of model.

    11



  • Page 12

    EN

    Wireless Remote Control

    Operating Method

    Inserting Batteries

    Point the remote control towards the signal
    receiver at the right side of the air conditioner to
    operate it.

    If the display screen of the remote control
    begins to fade, replace the batteries. Insert AAA
    (1.5 V) batteries before using the remote
    control.

    1

    Remove the battery cover.

    2

    Insert the new batteries and make sure that
    the + and - terminals of the batteries are
    installed correctly.

    NOTE

    Installing the Remote Control
    Holder
    To protect the remote control, install the holder
    where there is no direct sunlight.

    1

    Choose a safe and easily accessible
    location.

    2

    Fix the holder by fastening 2 screws firmly
    with a screwdriver.

    12

    ••The remote control may operate other
    electronic devices if it is directed towards
    them. Make sure to point the remote control
    towards the air conditioner signal receiver.
    ••For proper operation, use a soft cloth to clean
    the signal transmitter and receiver.
    ••In case of a function not provided in the
    product, no buzzer sound occurs from the
    product when a button for such function on
    the remote control is pressed except for Air
    Flow Direction ( SWING ), Energy Display (
    Air Purification function ( ).

    ),



  • Page 13

    EN

    Setting the Current Time

    1

    Insert batteries.
    ••The icon below blinks at the bottom of the
    display screen.

    2

    Press
    or
    minutes.

    3

    Press SET/CANCEL button to finish.

    button to select the

    Operating the Air Conditioner
    without the Remote Control
    You can use the ON/OFF button of the indoor
    unit to operate the air conditioner when the
    remote control is unavailable.

    1

    Open the front cover (Type2) or horizontal
    vane (Type1).

    2

    Press the ON/OFF button.

    Type1

    NOTE
    ••The On/Off Timer is available after setting the
    current time.
    ON/OFF

    Using the °C/°F Conversion
    Function (Optional)

    Type2

    This function changes unit between °C and °F
    ••Press and hold

    SWING

    button about 5 seconds.
    ON/OFF

    NOTE
    ••The stepping motor may be broken, if the
    horizontal vane opens rapidly.
    ••The fan speed is set to high.
    ••The feature may be changed according to the
    type of model.
    ••The temperature cannot be altered when
    using this emergency ON/OFF button.
    ••For cooling & heating models, the temperature
    is set from 22 °C to 24 °C

    13



  • Page 14

    EN

    Using Wireless Remote Control
    You can operate the air conditioner more conveniently with the remote control.
    Available Function
    Button
    2

    Display
    Screen

    SWING
    ℃↔℉ [5 s]

    FUNC.

    TIMER

    SET UP

    O

    O

    O

    O

    O

    O

    O

    O

    O

    O

    O

    O

    To adjust the air flow
    direction vertically or
    horizontally.

    O

    O

    DIAGNOSIS [5 s]

    MODE

    CANCEL

    RESET

    O

    O

    ROOM
    TEMP

    SET
    CANCEL

    O

    O

    1
    SWING

    O

    To adjust the fan
    speed.

    JET
    MODE
    kW [3 s]

    O

    FAN
    SPEED

    FAN
    SPEED
    TEMP

    *

    Multi

    JET
    MODE

    *
    MODE

    Single
    Split

    To turn on/off the air
    conditioner.
    To adjust the desired
    room temperature in
    cooling, heating or
    auto changeover
    mode.
    To select the cooling
    mode.
    To select the heating
    mode.
    To select the
    dehumidification mode.
    To select the fan
    mode.
    To select the auto
    changeover/auto
    operation mode.
    To change room
    temperature quickly.

    -

    *

    Description

    SWING

    SWING

    NOTE
    ••* buttons may be changed according to the type of model.
    ••When connected to the Multi Outdoor unit, the Energy Display, Energy
    Control, Silent and Smart Diagnosis function may not be supported.

    14



  • Page 15

    EN
    Available Function
    Button

    Display
    Screen

    2
    TIMER

    *

    *

    SET/
    CANCEL

    FAN
    SPEED

    MODE
    TEMP

    *

    CANCEL
    JET
    MODE

    1

    kW [3 s]

    SWING
    ℃↔℉ [5 s]

    FUNC.

    TIMER

    SWING

    SET UP

    ROOM
    TEMP
    DIAGNOSIS [5 s]

    SET
    CANCEL

    CANCEL

    RESET

    -

    *LIGHT
    OFF

    -

    ROOM
    TEMP
    °C↔°F
    [5 s]
    *COMFORT
    AIR
    kW
    [3 s]

    -

    *ENERGY
    CTRL
    DIAGNOSIS
    [5 s]

    -

    Description
    To turn on/off air
    conditioner
    automatically at
    desired time.
    To set/cancel the
    special functions and
    timer.
    To cancel the timer
    settings.
    To adjust time.
    To set the brightness
    of the display on the
    indoor unit.
    To display the room
    temperature.
    To change unit
    between °C and °F
    To adjust the air flow
    to deflect wind.
    To set whether or not
    to display information
    regarding energy.
    To bring the effect of
    the power saving.
    To conveniently check
    maintenance
    information of a
    product.

    Single
    Split

    Multi

    O

    O

    O

    O

    O

    O

    O

    O

    O

    O

    O

    O

    O

    O

    O

    O

    O

    X

    O

    X

    O

    X

    15



  • Page 16

    EN
    Available Function
    Button

    Display
    Screen

    2

    *
    FAN
    SPEED

    MODE
    TEMP

    *

    RESET

    JET
    MODE

    1

    kW [3 s]

    SWING
    ℃↔℉ [5 s]

    FUNC.

    TIMER

    SWING

    SET UP

    ROOM
    TEMP
    DIAGNOSIS [5 s]

    SET
    CANCEL

    CANCEL

    RESET

    16

    FUNC.

    *

    -

    Description
    To purify the air by
    removing particles that
    enters the indoor unit.
    To reduce noise from
    outdoor units.
    To remove moisture
    generated inside the
    indoor unit.
    To initialize the remote
    control settings.

    Single
    Split

    Multi

    O
    (Optional)

    O
    (Optional)

    O

    X

    O

    O

    O

    O

    NOTE
    ••Some functions may not be supported, depending on the model.
    ••* buttons may be changed according to the type of model.
    ••Press the SET/CANCEL button to operate the selected FUNC.



  • Page 17

    EN

    Restarting the Air Conditioner
    Automatically
    When the air conditioner is turned on again
    after a power failure, this function restores the
    previous settings.

    Using the Mode Function
    This function allows you to select the desired
    function.
    Cooling Mode

    Disabling Auto Restart

    1

    Open the front cover (Type2) or horizontal
    vane (Type1).

    2

    Press the ON/OFF button and hold it for 6
    seconds, then the unit will beep twice and
    the lamp will blink twice 4 times.
    ••To re-enable the function, press the ON/
    OFF button and hold it for 6 seconds. The
    unit will beep twice and the lamp will blink
    4 times.

    Auto Changeover Mode / Auto
    Operation(AI) Mode

    Dehumidification Mode

    Heating Mode

    Type1

    Fan Mode

    Cooling Mode
    ON/OFF

    Type2

    1

    Turn the appliance on.

    2

    Press MODE button repeatedly to select the
    Cooling Mode.
    ••

    is displayed on the display screen.

    ON/OFF

    NOTE
    ••The feature may be changed according to the
    type of model.
    ••If you press and hold the ON/OFF button for 3
    – 5 seconds, instead of 6 seconds, the unit
    will switch to the test operation. In the test
    operation, the unit blows out strong cooling air
    for 18 minutes and then returns to factory
    default settings.

    3

    Press
    or
    temperature.

    button to set the desired

    17



  • Page 18

    EN

    Auto Operation (Artificial
    Intelligence)

    Auto Changeover Mode

    Multi Model

    This mode changes the mode automatically to
    maintain the set temperature at ±2 °C

    In this operation mode, the system is
    automatically operated by the electronic
    controls.

    1

    Turn the appliance on.

    2

    Press MODE button repeatedly to select the
    Auto Operation.
    ••

    Single Split Model

    1

    Turn the appliance on.

    2

    Press MODE button repeatedly to select the
    Auto Changeover Mode.
    ••

    is displayed on the display screen.

    3
    3
    4

    18

    is displayed on the display screen.

    Press
    or
    temperature.

    Press
    or
    temperature.

    button to set the desired

    button to set the desired

    Press FAN SPEED button to adjust the fan
    speed.

    4

    Press FAN SPEED button to adjust the fan
    speed.



  • Page 19

    EN

    Dehumidification Mode

    Heating Mode

    This mode removes excess moisture from a
    highly humid environment or during the rainy
    season, in order to prevent mildew from setting
    in. This mode adjusts the room temperature and
    the fan speed automatically to maintain the
    optimal level of humidity.

    1

    Turn the appliance on.

    2

    Press MODE button repeatedly to select the
    Heating Mode.

    1

    Turn the appliance on.

    2

    Press MODE button repeatedly to select the
    Dehumidification Mode.
    ••

    ••

    is displayed on the display screen.

    is displayed on the display screen.

    3

    Press
    or
    temperature.

    button to set the desired

    NOTE
    NOTE
    ••In this mode you cannot adjust the room
    temperature, it is adjusted automatically.
    ••The room temperature is not displayed on the
    display screen.

    •• will be displayed on the indoor unit when
    defrosting is operating.
    ••Furthermore, this indication will be displayed
    on the indoor unit:
    −−When preheating is operating.
    −−When the room temperature has been
    reached to the set temperature.

    19



  • Page 20

    EN

    Fan Mode

    Using the Jet Mode Function

    This mode only circulates the indoor air without
    changing the room temperature.

    Changing Room Temperature
    Quickly

    1

    Turn the appliance on.

    2

    Press MODE button repeatedly to select the
    Fan Mode.
    ••

    3

    is displayed on the display screen.

    Press FAN SPEED button to adjust the fan
    speed.

    This function allows you to cool indoor air
    quickly during the summer or warm it quickly
    during winter.
    ••The Jet Mode function is available with
    Cooling, Heating and Dehumidification Mode.

    1

    Turn the appliance on.

    2

    Press MODE button repeatedly to select the
    desired mode.

    3

    Press JET MODE button.
    ••

    is displayed on the display screen.

    NOTE
    ••Jet Heating Mode is not available on some
    models.
    ••In Jet Cooling Mode, strong air blows out for
    30 minutes.
    ••After 30 minutes later, setting temperature is
    maintaining 18 °C
    If you want to change the temperature, Press
    or
    button to set the desired
    temperature.
    ••In Jet Heating Mode, strong air blows out for
    30 minutes.
    ••After 30 minutes later, setting temperature is
    maintaining 30 °C
    If you want to change the temperature, Press
    or
    button to set the desired
    temperature.
    ••This function may operate differently from the
    remote control display.

    20



  • Page 21

    EN

    Using the Fan Speed
    Function

    Using the Air Flow Direction
    Function

    Adjusting the Fan Speed

    This function adjusts the direction of the air flow
    vertically (horizontally).

    ••Press FAN SPEED button repeatedly to adjust
    the fan speed.
    Display Screen

    Speed
    High
    Medium - High
    Medium
    Medium - Low
    Low
    Natural Wind

    -

    NOTE
    ••The fan speed of Natural Wind adjusts
    automatically.




    ••The fan speed icons are displayed on some
    indoor units.






    ••Press SWING ( SWING ) button repeatedly and select
    the desired direction.
    −−Select
    (
    ) to adjust the direction of the
    air flow automatically.

    NOTE
    ••Adjusting the air flow direction horizontally
    may not be supported, depending on the
    model.
    ••Adjusting the air deflector arbitrarily may
    cause product failure.
    ••If you restart the air conditioner, it starts to
    operate with the previously set direction of air
    flow, so the air deflector may not match the
    icon displayed on the remote control. When
    this occurs, press SWING or SWING button to
    adjust the direction of the air flow again.
    ••This function may operate differently from the
    remote control display.



    ••Indoor unit display is displayed only 5 seconds
    and return to the setting temperature on some
    models.

    21



  • Page 22

    EN

    Setting the On/Off Timer

    Setting the Off Timer

    This function sets the air conditioner to turn on/
    off automatically at desired time.
    On/Off Timer can be set together.

    1

    Press TIMER button repeatedly.
    ••The icon below blinks at the bottom of the
    display screen.

    2

    Press
    or
    minutes.

    3

    Press SET/CANCEL button to finish.

    Setting the On Timer

    1

    Press TIMER button repeatedly.
    ••The icon below blinks at the bottom of the
    display screen.

    2

    Press
    or
    minutes.

    3

    Press SET/CANCEL button to finish.

    button to select the

    ••After setting the timer, current time and
    icon are displayed on the display
    screen indicating that the desired time is
    set.

    Canceling the On Timer

    1

    2

    ••After setting the timer, current time and
    icon are displayed on the display
    screen indicating that the desired time is
    set.

    NOTE
    ••This function is disabled when you set Simple
    Timer.

    Canceling the Off Timer

    1

    Press TIMER button repeatedly.
    ••The icon below blinks at the bottom of the
    display screen.

    2

    Press SET/CANCEL button to cancel the
    setting.

    Press TIMER button repeatedly.
    ••The icon below blinks at the bottom of the
    display screen.

    Press SET/CANCEL button to cancel the
    setting.

    Canceling the Timer Setting
    ••Press

    22

    button to select the

    CANCEL

    button to cancel all timer settings.



  • Page 23

    EN

    Using the Sleep Function
    (Optional)

    Using the Simple Timer
    Function (Optional)

    This function turns off the air conditioner
    automatically when you go to sleep.

    This function turns off the air conditioner
    automatically when you go to sleep.

    1

    Turn the appliance on.

    1

    Turn the appliance on.

    2

    Press TIMER button repeatedly.
    ••The icon below blinks at the bottom of the
    display screen.

    2

    Press TIMER button repeatedly.
    ••The icon below blinks at the bottom of the
    display screen.

    3

    Press
    or
    button to select the hour
    (up to 7 hours).

    3

    Press
    or
    button to select the hour
    (up to 7 hours).

    4

    Press SET/CANCEL button to finish.

    4

    Press SET/CANCEL button to finish.

    ••

    is displayed on the display screen.

    ••

    is displayed on the display screen.

    NOTE

    NOTE

    •• is displayed on some indoor units.
    ••Indoor unit display is displayed from 1H to 7H
    which is displayed only 5 seconds and then
    return to the setting temperature.
    ••In the Cooling and Dehumidification Mode, the
    temperature increases by 1 °C after 30
    minutes and additional 1 °C after another 30
    minutes for a more comfortable sleep.
    ••The temperature increases up to 2 °C from
    the preset temperature.
    ••Although the remark for fan speed on the
    display screen may be changed, the fan
    speed is adjusted automatically.

    ••This function is disabled when you set Off
    Timer.

    23



  • Page 24

    EN

    Using the Energy Display
    Function (Optional)

    Using the Light Off Function
    (Optional)

    This function displays the amount of electricity
    generated on the indoor display as the product
    operates.

    Display Screen Brightness

    Display the Current Energy Usage

    1
    2

    Turn the appliance on.

    You can set the brightness of the indoor unit
    display screen.
    ••Press LIGHT OFF button.

    NOTE
    ••Turn on/off the Display screen.

    Press
    button and hold it about 3
    seconds.
    ••The instantaneous power consumption (
    ) is displayed for a while on some
    indoor units.

    NOTE
    ••It is not displayed on the wireless remote
    control.
    ••The unit of the displayed value is kW.
    ••If it is more than 99 kW, which is the range of
    expression, maintain it as 99 kW.
    ••Display wattage under 10 kW with 0.1 kW
    unit, and display one over 10 kW with 1 kW
    unit.
    ••The actual power may differ from the power
    displayed.
    ••When connected to the Multi Outdoor unit, this
    function may not be supported.

    Using the Comfort Air
    Function (Optional)
    Comfort Vane Operation
    This function conveniently sets the vane to a
    preset position to deflect the supply air away
    from blowing directly onto the occupants in the
    room.

    1

    Turn the appliance on.

    2

    Press COMFORT AIR button repeatedly
    and select the desired direction.
    ••
    or
    screen.

    is displayed on the display

    NOTE
    ••
    or
    is displayed on some indoor units.
    ••This function is disabled when you press
    MODE or JET MODE button.
    ••This function is disabled and auto swing of
    vertical direction is set up when you press
    SWING button.
    ••When this function is off, the horizontal vane
    operates automatically depending on the set
    mode.

    24



  • Page 25

    EN

    Using the Energy Control
    Function (Optional)
    1

    Turn the appliance on.

    2

    Press ENERGY CTRL button.
    ••Press ENERGY CTRL button repeatedly
    to select each step.
    1 step

    2 step

    Using Special Functions
    1

    Turn the appliance on.

    2

    Press FUNC button repeatedly to select the
    desired function.

    3

    Press SET/CANCEL button to finish.

    3 step

    NOTE
    ••1 step : The power Input is decreased by 20
    % compared to rated power input.

    Display
    Screen

    is displayed on the display screen.
    −−
    ••2 step : The power Input is decreased by 40
    % compared to rated power input.

    To purify the air by removing
    particles that enters the indoor
    unit.
    To reduce noise from outdoor
    units.
    To remove moisture generated
    inside the indoor unit.

    −−
    is displayed on the display screen.
    ••3 step (Optional) : The power Input is
    decreased by 60 % compared to rated power
    input.
    −−

    is displayed on the display screen.

    •• (1 step),
    (2 step) is displayed on some
    indoor units.
    ••This function is available with Cooling Mode.
    ••Capacity may decrease when Energy Control
    mode is selected.

    Description

    NOTE
    ••Some functions may not be supported,
    depending on the model.
    ••Some functions may operate differently from
    the remote control display.

    ••Desired temperature is displayed about 5
    seconds if you press FAN SPEED,
    or
    button.
    ••Room temperature is displayed about 5
    seconds if you press ROOM TEMP button.
    ••When connected to the Multi Outdoor unit, this
    function may not be supported.

    25



  • Page 26

    EN

    Canceling Special Functions

    Using the Silent Function

    1

    This function prevents potential claims by
    neighbors, reducing noise from outdoor units.

    Press FUNC button repeatedly to select the
    desired function.

    ••

    2

    is displayed on the display screen.

    Press SET/CANCEL button to cancel the
    function.

    Using the Air Purification
    Function
    These functions supply clean and fresh air by
    ion particles and the filter.
    Function

    Ionizer

    Plasma

    Display

    Description
    Ion particles
    from Ionizer
    sterilize the
    aerial bacteria
    and other
    harmful
    substances.
    It removes
    microscopic
    contaminants
    from the intake
    air completely to
    supply clean and
    fresh air.

    NOTE
    ••This function is disabled when you press
    MODE or ENERGY CTRL or JET MODE
    button.
    ••This function is available with Cooling,
    Heating, Auto Changeover, Auto Operation
    Mode.
    ••When connected to the Multi Outdoor unit, this
    function may not be supported.

    Using the Auto Clean Function
    In the Cooling and Dehumidification Mode,
    moisture is generated inside the indoor unit.
    This function removes such moisture.
    ••

    is displayed on the display screen.

    NOTE
    ••You can use this function without turning the
    air conditioner on.
    ••Both the plasma lamp and the cooling lamp
    light up while Smoke Away/Plasma is in
    operation on some models.
    ••Do not touch ionizer during operation.
    ••This function may operate differently from the
    remote control display.

    26

    NOTE
    ••Some functions cannot be used while the Auto
    Clean function is in operation.
    ••If you turn off the unit, the fan continues to run
    for 30 minutes and cleans the inside of the
    indoor unit.



  • Page 27

    SMART FUNCTIONS
    Using LG SmartThinQ
    Application
    Things to check before using LG
    SmartThinQ
    ••For appliances with the

    logo

    1

    Check the distance between the appliance
    and the wireless router (Wi-Fi network).
    ••If the distance between the appliance and
    the wireless router is too far, the signal
    strength becomes weak. It may take a
    long time to register or installation may
    fail.

    2

    Turn off the Mobile data or Cellular Data
    on your smartphone.
    ••For iPhones, turn data off by going to
    Settings → Cellular → Cellular Data.

    3

    Connect your smartphone to the wireless
    router.

    EN

    NOTE
    ••To verify the Wi-Fi connection, check that
    Wi-Fi
    icon on the control panel is lit.
    ••The appliance supports 2.4 GHz Wi-Fi
    networks only. To check your network
    frequency, contact your Internet service
    provider or refer to your wireless router
    manual.
    ••LG SmartThinQ is not responsible for any
    network connection problems or any faults,
    malfunctions, or errors caused by network
    connection.
    ••If the appliance is having trouble connecting to
    the Wi-Fi network, it may be too far from the
    router. Purchase a Wi-Fi repeater (range
    extender) to improve the Wi-Fi signal strength.
    ••The Wi-Fi connection may not connect or may
    be interrupted because of the home network
    environment.
    ••The network connection may not work
    properly depending on the Internet service
    provider.
    ••The surrounding wireless environment can
    make the wireless network service run slowly.
    ••The appliance cannot be registered due to
    problems with the wireless signal
    transmission. Unplug the appliance and wait
    about a minute before trying again.
    ••If the firewall on your wireless router is
    enabled, disable the firewall or add an
    exception to it.
    ••The wireless network name (SSID) should be
    a combination of English letters and numbers.
    (Do not use special characters.)
    ••Smartphone user interface (UI) may vary
    depending on the mobile operating system
    (OS) and the manufacturer.
    ••If the security protocol of the router is set to
    WEP, you may fail to set up the network.
    Please change it to other security protocols
    (WPA2 is recommended) and register the
    product again.

    27



  • Page 28

    EN

    Installing LG SmartThinQ
    Search for the LG SmartThinQ application from
    the Google Play Store or Apple App Store on a
    smart phone. Follow instructions to download
    and install the application.

    NOTE
    ••If you choose the simple login to access the
    LG SmartThinQ application, you must go
    through the appliance registration process
    each time you change your smartphone or
    reinstall the application.

    Product Registration

    1

    Run the LG SmartThinQ application on a
    smart phone.

    2

    Create an account and sign in.

    3

    Select Register.

    4

    Select Air conditioner.

    5

    Follow the instruction on the smart phone.

    Wi-Fi Function
    ••For appliances with the
    logo
    Communicate with the appliance from a smart
    phone using the convenient smart features.

    28

    Using the Application

    1

    Select the appliance in the application and
    connect it to a Wi-Fi network.

    2

    Select the menu on the upper right side to
    access settings and features.

    Firmware Update
    Keep the appliance performance updated.

    Smart Diagnosis™
    If you use the Smart Diagnosis function, you will
    be provided with the useful information such as
    a correct way of using the appliance based on
    the pattern of use.

    Settings
    Allows you to set various options on the
    appliance and in the application.

    NOTE
    ••If you change your wireless router, your
    Internet service provider or your password
    after registering the appliance, please delete it
    from the LG SmartThinQ Settings → Edit
    Product and register again.
    ••The application is subject to change for
    appliance improvement purposes without
    notice to users.
    ••Functions may vary by model.



  • Page 29

    EN

    Open Source Software Notice
    Information
    To obtain the source code under GPL, LGPL,
    MPL, and other open source licenses, that is
    contained in this product, please visit http://
    opensource.lge.com.
    In addition to the source code, all referred
    license terms, warranty disclaimers and
    copyright notices are available for download.
    LG Electronics will also provide open source
    code to you on CD-ROM for a charge covering
    the cost of performing such distribution (such as
    the cost of media, shipping, and handling) upon
    email request to opensource@lge.com. This
    offer is valid for a period of three years after our
    last shipment of this product. This offer is valid
    to anyone in receipt of this information.

    Smart Diagnosis™ Using a Smart
    Phone
    ••For appliances with the
    or
    logo
    Use this function if you need an accurate
    diagnosis by an LG Electronics customer
    information centre when the appliance
    malfunctions or fails.
    Smart Diagnosis™ can not be activated unless
    the appliance is connected to power. If the
    appliance is unable to turn on, then
    troubleshooting must be done without using
    Smart Diagnosis™.

    1

    Open the LG SmartThinQ application on
    the smart phone.

    2

    Select the air conditioner in dashboard.

    3

    Press Start Smart Diagnosis button.

    4

    Follow the instructions on the smart phone.

    NOTE
    ••The Smart Diagnosis™ function depends on
    the local call quality.
    ••If the Smart Diagnosis™ data transfer is poor
    due to poor call quality, you may not receive
    the best Smart Diagnosis™ service.
    ••Be sure to keep ambient noise to a minimum
    or the phone may not correctly receive the
    buzzer beeps from the indoor unit.

    29



  • Page 30

    MAINTENANCE

    EN

    WARNING
    ••Before cleaning or performing maintenance, disconnect the power supply and wait until the fan
    stops.
    If the air conditioner will not be used for an extended period of time, dry the air conditioner to
    maintain it in best condition. Clean the product regularly to maintain optimal performance and to
    prevent possible breakdown.
    ••Dry the air conditioner in Fan mode for 3 to 4 hours and disconnect the power. There may be
    internal damage if moisture is left in its components.
    ••Before using the air conditioner again, dry the inner components of the air conditioner in Fan mode
    for 3 to 4 hours. This will help to remove the odor generated from moisture.
    Air Filter

    ••The feature may be changed according to the type of model.

    30



  • Page 31

    EN
    Type

    Description

    Air filter
    Clean with a vacuum or hand wash.
    Ionizer (Optional) Use dry cotton bud to remove any dust.
    Clean the Indoor unit surface by using a soft, dry cloth.
    Have a professional clean the condensate drain pan.
    Indoor unit
    Have a professional clean the condensate drain pipe.
    Replace the remote control batteries.
    Have a professional clean the heat exchanger coils and
    the panel vents. (Consult with technician.)
    Have a professional clean the fan.
    Outdoor unit
    Have a professional clean the condensate drain pan.
    Have a professional verify that all the fan assembly is
    firmly tightened.
    Clean the electric components with air.

    Interval
    2 weeks
    Every 6 months
    Regularly
    Once a year
    Every 4 months
    Once a year
    Once a year
    Once a year
    Once a year
    Once a year
    Once a year

    NOTE
    ••Never use water that is higher than 40 °C when you clean the filters. It may cause deformation or
    discoloration.
    ••Never use volatile substances when you clean the filters. They may damage the surface of the
    product.

    31



  • Page 32

    EN

    Clean the Air Filter

    7

    Push down hooks to assemble the air filter.

    8

    Check the side of the front cover for correct
    assembly of the air filter.

    Clean the air filters once every 2 weeks, or
    more, if necessary.

    NOTE
    ••The air filter can be broken when it is bent.
    ••When the air filter is not assembled correctly,
    dust and other substances can enter into the
    indoor unit.

    Type1
    If you look at the indoor unit from above it, can
    assemble the top filter easily.

    1

    Turn off the power to the unit.

    2

    Hold the knobs of the air filter, lift it up
    slightly.

    3

    4

    1

    Turn off the power to the unit.

    2

    Open the front cover.
    ••Lift up both sides of the cover slightly.

    3

    Hold the knobs of the air filters, pull them
    down slightly and remove them from the
    indoor unit.

    4

    Clean the filters with a vacuum cleaner or
    with lukewarm water with neutral detergent.

    5

    Dry the filters in the shade.

    6

    Insert the hooks of the air filters into the
    front cover.

    7

    Check the side of the front cover for correct
    assembly of the air filters.

    Remove it from the indoor unit.

    Clean the filter with a vacuum cleaner or
    with lukewarm water with neutral detergent.

    5

    Dry the filter in the shade.

    6

    Insert the hooks of the air filter into the front
    cover.

    32

    Type2



  • Page 33

    TROUBLESHOOTING

    EN

    Self-diagnosis Function
    This product has a built-in self-diagnosis function. If an error occurs, the lamp of the indoor unit will
    blink in 2 second intervals. If this occurs, contact your local dealer or service center.

    Before Calling for Service
    Please check the following before you contact the service center. If the problem persists, contact
    your local service center.
    Problem

    The air conditioner
    does not work
    normally.

    Possible Causes
    Burning smell and strange
    sounds are coming from the
    unit.
    Water leaks from the indoor
    unit even when the humidity
    level is low.
    The power cable is damaged
    or it is generating excessive
    heat.
    A switch, a circuit breaker
    (safety, ground), or a fuse is
    not operated properly.
    The unit generates an error
    code from its self-diagnosis.
    The air conditioner is
    unplugged.
    A fuse exploded, or the power
    supply is blocked.
    A power failure has occurred.

    The air conditioner
    does not work.

    Corrective Action

    ••Turn off the air conditioner, switch
    OFF, or disconnect the power supply,
    and contact the service center.

    ••Check whether the power cord is
    plugged into the outlet or the power
    isolators are switched on.
    ••Replace the fuse or check if the circuit
    breaker has tripped.
    ••Turn off the air conditioner when a
    power failure occurs.
    ••When the power is restored, wait 3
    minutes, and then turn on the air
    conditioner.
    ••Check if the circuit breaker has
    tripped.

    The voltage is too high or too
    low.
    The air conditioner was turned
    off automatically at a preset
    ••Turn the air conditioner on.
    time.
    ••Make sure that the batteries are
    inserted correctly in your remote
    controller.
    The battery setting in the
    the batteries are placed correctly,
    remote controller is incorrect. ••If
    but the air conditioner still does not
    operate, replace the batteries and try
    again.

    33



  • Page 34

    EN
    Problem

    Possible Causes
    Air is not circulating properly.

    The air filter is dirty.

    The room temperature is too
    high.
    The air conditioner
    does not emit cool
    air.

    Cold air is escaping from the
    room.
    The desired temperature is
    higher than the current
    temperature.
    There is a heating source
    nearby.

    Fan Mode is selected.
    Outside temperature is too
    high.
    The fan speed
    cannot be adjusted.

    The Jet Mode, or Auto
    Operation Mode is selected.

    The temperature
    cannot be adjusted.

    The Fan Mode or Jet Mode is
    selected.

    The air conditioner
    stops during
    operation.

    34

    The air conditioner is
    suddenly turned off.
    A power failure has occurred
    during operation.

    Corrective Action
    ••Make sure that there are no curtains,
    blinds, or pieces of furniture blocking
    the front of the air conditioner.
    ••Clean the air filter once every 2
    weeks.
    ••See “Clean the Air Filter” for more
    information.
    ••In summer, cooling the indoor air fully
    may take some time. In this case,
    select the Jet Mode to cool the indoor
    air quickly.
    ••Make sure that no cold air is escaping
    through the ventilation points in the
    room.
    ••Set the desired temperature to a level
    lower than the current temperature.
    ••Avoid using heat generators like
    electric ovens or gas burners while
    the air conditioner is in operation.
    ••During Fan Mode, air blows from the
    air conditioner without cooling or
    heating the indoor air.
    ••Switch the operation mode to cooling
    operation.
    ••The cooling effect may not be
    sufficient.
    ••In some operation modes, you cannot
    adjust the fan speed. Select an
    operation mode in which you can
    adjust the fan speed.
    ••In some operation modes, you cannot
    adjust the temperature. Select an
    operation mode in which you can
    adjust the temperature.
    ••The Timer Function may have timed
    out, which turns the unit off. Check
    the timer settings.
    ••Wait for the power to come back. If
    you have the Auto Restart function
    enabled, your unit will resume its last
    operation several minutes after power
    is restored.



  • Page 35

    EN
    Problem

    Possible Causes

    The indoor unit is
    still operating even
    when the unit has
    been turned off.

    The Auto Clean function is
    being operated.

    The air outlet on the
    indoor unit is
    discharging mist.

    The cooled air from the air
    conditioner makes mist.

    Corrective Action
    ••Allow the Auto Clean function to
    continue since it removes any
    remaining moisture inside the indoor
    unit. If you do not want this feature,
    you can turn the unit off.
    ••When the room temperature
    decreases, this phenomenon will
    disappear.
    ••This symptom requires installing a
    drain hose under the base pan.
    Contact the installer.

    the heating operations,
    Water leaks from the In
    condensed water drops from
    outdoor unit.
    the heat exchanger.
    A clicking sound can be heard
    when the unit starts or stops
    due to movement of the
    reversing valve.
    Creaking sound: The plastic
    There is noise or
    parts of the indoor unit creak
    ••These are normal symptoms. The
    vibration.
    when they shrink or expand
    noise will stop.
    due to sudden temperature
    changes.
    Flowing or Blowing sound:
    This is the flow of refrigerant
    through the air conditioner.
    Odors (such as cigarette
    ••If the smell does not disappear, you
    smoke) may be absorbed into
    need to wash the filter. If this does not
    The indoor unit
    gives off an odor.
    the indoor unit and discharged work, contact the service center to
    with airflow.
    clean your heat exchanger.
    When Heating Mode starts, the ••This symptom is normal. Please wait
    vane is almost closed, and no
    until the unit has generated enough
    air comes out, even though
    warm air to blow through the indoor
    the outdoor unit is operating.
    unit.


    In Heating Mode, ice/frost is built up
    The air conditioner
    on the coils when the outside
    does not emit warm The outdoor unit is in
    temperature falls. This function
    air.
    Defrosting Mode.
    removes a layer of frost on the coil,
    and it should finish in approximately
    15 minutes.
    Outside temperature is too
    ••The heating effect may not be
    low.
    sufficient.

    35



  • Page 36

    EN
    Problem

    Possible Causes

    Corrective Action

    ••Find the Wi-Fi network connected to
    your smartphone and remove it, then
    register your appliance on LG
    SmartThinQ.


    Turn off the Mobile data of your
    Mobile data for your
    smartphone and register the appliance
    smartphone is turned on.
    using the Wi-Fi network.
    ••The wireless network name (SSID)
    The wireless network name
    should be a combination of English
    (SSID) is set incorrectly.
    letters and numbers. (Do not use
    Your home appliance
    special characters.)
    and smartphone is
    ••Only a 2.4 GHz router frequency is
    not connected to the
    supported. Set the wireless router to
    Wi-Fi network.
    GHz and connect the appliance to
    The router frequency is not 2.4 2.4
    the wireless router. To check the
    GHz.
    router frequency, check with your
    Internet service provider or the router
    manufacturer.
    ••If the distance between the appliance
    and the router is too far, the signal
    The distance between the
    may be weak and the connection may
    appliance and the router is too
    not be configured correctly. Move the
    far.
    location of the router so that it is
    closer to the appliance.
    The password for the Wi-Fi
    that you are trying to connect
    to is incorrect.

    NOTE
    ••Some functions may not be supported, depending on the model.

    36



  • Page 37

    Memo



  • Page 38






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für LG DC18RQ wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von LG DC18RQ in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 0,82 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von LG DC18RQ

LG DC18RQ Bedienungsanleitung - Deutsch - 38 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info