Zoom out
Zoom in
Vorherige Seite
1/100
Nächste Seite
PH150G
Please read the safety information carefully before using this product.
Owner's Manual
LG CineBeam
Lcos Projector
www.lg.com
P/NO : SAC37034603 (1805-REV05)
Copyright
2017 LG Electronics Inc. All Rights Reserved.
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    Owner's Manual

    LG CineBeam
    Lcos Projector

    Please read the safety information carefully before using this product.

    PH150G

    www.lg.com
    P/NO : SAC37034603 (1805-REV05)
    Copyright ⓒ 2017 LG Electronics Inc. All Rights Reserved.



  • Page 2

    2

    LICENSES
    Supported licenses may differ by model. For more information about
    licenses, visit www.lg.com.

    ENGLISH

    Manufactured under license from Dolby
    Laboratories. Dolby and the double-D symbol
    are trademarks of Dolby Laboratories.
    This DivX Certified® device has passed
    rigorous testing to ensure it plays DivX®
    video.
    To play purchased DivX movies, first register
    your device at vod.divx.com. Find your
    registration code in the DivX VOD section of
    your device setup menu.
    DivX Certified® to play DivX® video up to HD
    1080p, including premium content.
    DivX®, DivX Certified® and associated logos
    are trademarks of DivX, LLC and are used
    under license.
    Covered by DivX Patents 7,295,673;
    7,515,710; RE45,052; and others available
    at [www.divx.com/patents]
    The terms HDMI and HDMI High-Definition
    Multimedia Interface, and the HDMI logo
    are trademarks or registered trademarks of
    HDMI Licensing LLC in the United States
    and other countries.



    NOTE
    • Image shown may differ from your projector.
    • Your projector’s OSD (On Screen Display) may differ slightly from
    that shown in this manual.



  • Page 3

    3

    SAFETY PRECAUTIONS

    WARNING/CAUTION
    RISK OF ELECTRIC SHOCK
    DO NOT OPEN

    The lightning flash with
    arrowhead symbol, within
    an equilateral triangle, is
    intended to alert the user to the
    presence of uninsulated dangerous
    voltage within the product’s
    enclosure that may be of sufficient
    magnitude to constitute a risk of
    electric shock to persons.
    The exclamation point
    within an equilateral
    triangle is intended to alert
    the user to the presence of
    important operating and
    maintenance (servicing)
    instructions in the literature
    accompanying the device.
    WARNING/CAUTION
    -- TO REDUCE THE RISK
    OF FIRE AND ELECTRIC
    SHOCK, DO NOT EXPOSE
    THIS PRODUCT TO RAIN OR
    MOISTURE.

    Read these instructions.
    Keep these instructions.
    Heed all warnings.
    Follow all instructions.

    Indoor Installation
    WARNING
    • Do not use the projector outside
    and do not expose the product
    to any humidity or water.
    --Since the product is not
    waterproof, this may result in
    a fire or electric shock.
    • Do not place the projector in
    direct sunlight or near heat
    sources such as radiators, fires,
    stoves, etc.
    --This may result in fire.
    • Do not place flammable
    materials such as aerosols near
    the projector.
    --This may result in fire.

    ENGLISH

    Please take note of the safety instructions to prevent any potential accident
    or misuse of the projector.
    • Safety precautions are given in two forms, i.e., WARNING and CAUTION
    as detailed below.
    WARNING Failure to follow the instructions may cause serious
    injury and even death.
    CAUTION Failure to follow the instructions may cause personal
    injury or product damage.
    • Read the owner's manual carefully and keep it on hand.



  • Page 4

    4

    ENGLISH

    • Do not allow children to cling to
    or climb up to the projector.
    --This may cause the projector
    to fall, causing injury or
    death.
    • Do not install the product in a
    place with no ventilation (e.g.,
    on a bookshelf or in a closet) or
    on a carpet or cushion.
    --This may result in fire due
    to the increase in internal
    temperature.
    • Do not place the product close
    to sources of steam, oil or oil
    mist, such as humidifiers and
    kitchen counters.
    --Failure to do so may result
    in fire, electric shock, or
    corrosion.
    • Do not install the product onto
    a wall or ceiling that is close to
    sources of oil or oil mist.
    --The product may be
    damaged and fall, resulting in
    serious injury.
    • Do not place the projector where
    it might be exposed to dust.
    --This may result in fire.

    • Do not use the projector in a
    damp place such as a bathroom
    where it is likely to get wet.
    --This may result in fire or
    electric shock.
    • Do not allow a tablecloth or
    curtain to block the air vent.
    --This may result in fire due to
    the increase in the internal
    temperature.
    • Ensure good ventilation around
    the projector. The distance
    between the projector and the
    wall should be at least 30 cm.
    --This will prevent fire due to
    the increase in the internal
    temperature.
    CAUTION
    • When placing the projector on a
    table or shelf, be careful not to
    put it near the edge.
    --The projector could fall due
    to balance problems, which
    may cause personal injury or
    damage to the product. Make
    sure to use the projector
    cabinet or stand that fits the
    projector.



  • Page 5

    5

    Power
    WARNING
    • DISCONNECTING THE
    DEVICE FROM THE MAIN
    POWER
    --The Power plug is the
    disconnecting device. In case
    of an emergency, the Power
    Plug must remain readily
    accessible.

    • The grounding wire should be
    connected. (Except for devices
    which are not grounded.)
    --Ensure that you connect the
    grounding cable to avoid
    electric shock.
    If it is not possible to ground
    the unit, have a qualified
    electrician install a separate
    circuit breaker.
    Do not try to ground the
    projector by connecting it to
    telephone wires, lightning
    rods, or gas pipes.
    • The power plug should be
    inserted fully into the power
    outlet.
    --An unstable connection may
    cause a fire.
    • Do not place heavy objects on
    the power cord.
    --This may result in fire or
    electric shock.
    • Never touch the power plug with
    wet hands.
    --This may result in electric
    shock.
    • Do not plug too many devices
    into one multi-power outlet.
    --This may result in fire due to
    the power outlet overheating.

    ENGLISH

    • When moving the projector,
    make sure to switch it off and
    remove the power plug and
    cords.
    --The power cord may be
    damaged, resulting in fire or
    electric shock.
    • Do not place the projector on
    an unstable or vibrating surface
    such as a wobbly shelf or a
    slope.
    --It may fall and cause injury.
    • Be careful not to tip the projector
    over when connecting external
    devices to the projector.
    --This may cause personal
    injury or damage to the
    projector.



  • Page 6

    6

    ENGLISH

    • Keep the AC adapter, power
    plug, and the used power outlet
    clean from dust or foreign
    materials building up.
    –– This may result in fire.
    • If there is any smoke or a
    burning smell from the projector
    or AC adapter, stop using the
    product immediately. Disconnect
    the power cord from the power
    outlet, and then contact the
    customer service center.
    –– This may result in fire.
    • To turn off the main power,
    remove the power plug, which
    should be positioned so it is
    easy to access for operation.

    CAUTION
    • Always grab the plug to remove
    the AC adapter or power cord.
    –– Otherwise, this may result
    in a fire or may damage the
    product.
    • Refrain from constantly bending
    the power cord of the AC
    adapter.
    –– If the power cord is bent
    excessively for a long period
    of time, the cord may break
    inside. This may result in a
    fire or electric shock.
    • Ensure the power cord and plug
    are not damaged, modified,
    severely bent, twisted, pulled,
    sandwiched or hot. Do not use
    the product if the power outlet
    is loose.
    –– This may result in fire or
    electric shock.
    • Keep the power cord away from
    heating devices.
    --The wire's sheath may melt,
    which may result in fire or
    electric shock.



  • Page 7

    7
    • If any water or foreign materials
    have gone into the AC adapter,
    power cord, or the interior of the
    projector, turn off the projector
    by pressing the power button.
    Remove all the cables, and then
    contact the customer service
    center.
    –– This may result in fire or
    electric shock.
    • The surface of the AC adapter is
    hot. Keep the AC adapter out of
    the reach of children and avoid
    touching it during use.
    • Never disassemble the power
    supply devices (AC adapter/
    power cord, etc.).
    –– This may damage the power
    cord and result in a fire or
    electric shock.
    • Connect the AC adapter and the
    power cord firmly.
    –– Not doing so may result in a
    product failure or fire.

    ENGLISH

    • Place the projector where
    people will not trip over or step
    on the power cord to protect the
    power cord and plug from any
    damage.
    --This may result in fire or
    electric shock.
    • Do not turn the projector on or
    off by plugging in the power plug
    or unplugging it from the power
    outlet. (Do not use the power
    plug as a switch.)
    --This may result in electric
    shock or damage to the
    product.
    • Do not insert a conductor
    into the other side of the wall
    outlet while the power plug is
    inserted into the wall outlet.
    In addition, do not touch the
    power plug immediately after it
    is disconnected from the wall
    outlet.
    --This may result in electric
    shock.
    • Only use the official power cord
    provided by LG Electronics. Do
    not use other power cords.
    --This may result in fire or
    electric shock.



  • Page 8

    8

    ENGLISH

    • Do not place heavy objects
    or put pressure on the power
    cord and AC adapter and avoid
    damage.
    –– This may result in a fire or
    may damage the product.
    • Always use the AC adapter
    provided or any AC adapters
    approved and certified by LG
    Electronics.
    –– Any other AC adapter
    connected may result in the
    screen flickering.

    When in Use
    WARNING
    • Do not place anything
    containing liquid on top of the
    projector such as a vase, flower
    pot, cup, cosmetics, medicine,
    or ornaments, candles, etc.
    --This may result in fire or
    electric shock, or cause injury
    due to falling.
    • In the event that there is a
    heavy impact or the cabinet is
    damaged, switch it off, unplug
    it from the power outlet and
    contact an authorized service
    center.
    --This may result in electric
    shock.
    • Do not insert pieces of metal
    such as coins, hairpins, or metal
    debris, nor flammable materials
    such as paper or matches into
    the projector.
    --This is to prevent electric
    shock or fire.



  • Page 9

    9
    • Do not use the projector near
    electronic devices that generate
    a strong magnetic field.
    • Keep the plastic film used for
    packaging the projector out of
    the reach of children.
    –– If not handled safely, it can
    cause suffocation.
    • Do not keep your hand on the
    projector for a long time when it
    is running.
    • When you play a game by
    connecting a game console to
    a projector, it is recommended
    that you maintain a distance
    of more than four times the
    diagonal length of the screen.
    --Make sure that the
    connecting cable is long
    enough. Otherwise, the
    product may fall causing
    personal injury or damage to
    the product.
    • Do not place the projector or its
    remote control with battery in
    an extremely high temperature
    environment.
    --This may result in fire.

    ENGLISH

    • Make sure that a child does
    not swallow the batteries when
    you replace the old remote
    control batteries with new ones.
    Keep batteries out of reach of
    children.
    --If a child swallows a battery,
    consult a doctor immediately.
    • Never open any cover on the
    projector.
    --There is a high risk of electric
    shock.
    • Do not look directly into the lens
    when the projector is in use.
    --The bright light may damage
    your eyes.
    • When the lamp is on or has just
    been turned off, avoid touching
    the air vent or lamp, because
    these will be very hot.
    • If there is a gas leak in the
    room with the projector, do not
    touch the projector or power
    outlet. Open the windows for
    ventilation.
    --Sparks may cause fire or
    burns.
    • Unplug the power cord from the
    outlet during a lightning storm.
    --This will prevent shock or
    damage to the projector.



  • Page 10

    10
    CAUTION

    ENGLISH

    • Do not place heavy objects on
    the projector.
    --It may fall down and cause
    personal injury.
    • Be careful not to allow any
    impact to the lens during
    transport.
    • Do not touch the lens of the
    projector.
    --The lens may be damaged.
    • Do not use any sharp tools on
    the projector such as a knife
    or hammer, because this may
    damage the casing.
    • In the event that no image
    appears on the screen or no
    sound is heard, stop using
    the projector. Switch off the
    projector, unplug it from the
    power outlet and contact our
    service center.
    --This may result in fire or
    electric shock.
    • Do not drop anything onto the
    projector or allow anything to
    bang into the projector.
    --This may cause damage
    to the projector or personal
    injury.

    • It is recommended that you
    maintain a distance of more
    than 5 to 7 times the diagonal
    length of the screen.
    –– If you watch the screen at
    a close distance for a long
    time, your eye sight may
    become worse.
    • Do not block the light beam
    emitted from the projector using
    a book or other object.
    --Lengthy exposure to the
    projector beam may result in
    fire. In addition, the lens may
    be overheated and damaged
    by the reflected heat. Disable
    the AV function to stop
    projection temporarily or turn
    off the power.
    • Do not start the projector with
    the volume turned up high.
    --High volume may damage
    hearing.
    • Do not use high voltage
    electrical equipment near the
    projector, (e.g., a bug zapper).
    This may result in product
    malfunction.



  • Page 11

    11

    Cleaning
    WARNING

    • Contact your seller or our service
    center once a year to clean the
    internal parts of the projector.
    --If you do not clean the
    projector for a long period of
    time, dust will accumulate,
    which may result in fire or
    damage to the projector.
    • When cleaning plastic parts such
    as the projector case, unplug the
    power first and wipe with a soft
    cloth. Do not spray with water
    or wipe with a wet cloth. Never
    use glass cleaner, automobile or
    industrial polish, abrasives, wax,
    benzene, or alcohol as these can
    damage the projector.
    --This can result in fire, electric
    shock or cause damage to
    the product (deformation and
    corrosion).
    • Remove the plug from the outlet
    before cleaning the product.
    --Otherwise, this may result in
    electric shock.

    ENGLISH

    • Do not spray the projector with
    water when cleaning. Make sure
    water does not flow into the
    projector.
    --This may result in fire or
    electric shock.
    • When there is smoke or a
    strange smell coming out from
    the projector or a foreign object
    falls into the projector, please
    switch it off and unplug it from
    the power outlet and contact our
    service center.
    --Otherwise, this may result in
    fire or electric shock.
    • Use air spray, a soft cloth, or a
    cotton swab moistened with a
    lens cleaning chemical or alcohol
    to remove dust or stains on the
    front projection lens.

    CAUTION



  • Page 12

    12

    Others
    WARNING

    ENGLISH

    • Some users may experience
    a seizure or other abnormal
    symptoms when they are
    exposed to a flashing light or
    particular patterns from a video
    game.
    • When you go out, place the
    projector out of reach of animals,
    and remove the power plug from
    the wall outlet.
    --Using a damaged power cord
    may result in short circuit or
    fire.
    • Do not use the projector near
    high-precision electronic devices
    or those that transmit weak radio
    signal.
    --This may affect the operation
    of the product, causing an
    accident.
    • Only a qualified technician
    can disassemble or modify
    the projector. For diagnosis,
    adjustment, or repair, contact
    your seller or our service center.
    --This may result in fire or
    electric shock.

    • Proper ventilation required, do
    not block airflow around unit.
    Doing so can cause injury and
    internal overheating.
    • Do not touch the lens; doing so
    can result in burns or damage to
    lens. Lens and unit may be HOT
    during and immediately after use.
    Use caution when handling unit,
    allowing for proper cool down.
    • Only use a grounded electrical
    outlet. (Except for devices which
    are not grounded.)
    • Do not insert anything into or
    cover up the exhaust vents.
    --This may result in fire or
    electric shock.
    • Follow all maintenance
    guidelines for optimal use;
    service only at an authorized
    service center.



  • Page 13

    13

    CAUTION
    • Do not use or store the projector
    outdoors for long periods of
    time.
    • Do not mix new batteries with
    old ones.
    --Burst or leaking batteries
    may result in damage or
    injury.
    • Be sure to unplug if the projector
    is not to be used for a long
    period.
    --Accumulated dust may result
    in fire or electric shock due to
    overheating, ignition, or poor
    insulation.

    • Only use the specified type of
    battery.
    --Burst or leaking batteries
    may result in damage or
    injury.
    • Make sure you use the same
    type of battery when replacing.
    (Battery type: CR2032 / 3 V)
    –– In the case of a battery
    contact failure, the battery
    may drain quickly or the
    remote control may not work
    properly.
    • Dispose of used batteries
    properly.
    --This may result in explosion
    or fire. The correct method of
    disposal may vary depending
    on your country or region.
    Dispose of the battery pack
    as instructed.
    • Do not throw or disassemble the
    battery.
    --This may result in fire or
    explosion due to damage to
    the battery.

    ENGLISH

    • Keep the batteries and remote
    out of reach of children.
    –– This will prevent personal
    injury or damage to the
    product.



  • Page 14

    14

    ENGLISH

    • Store batteries away from
    metallic objects, such as keys
    and paper clips.
    --Excess current may
    cause a rapid increase in
    temperature, resulting in fire
    or burns.
    • Do not store the batteries near
    any heat source, such as a
    heater.
    --This may result in fire or
    damage to the product.
    • Do not store batteries at
    temperatures higher than 60 °C
    or in high humidity.
    --This may result in explosion
    or fire.
    • Make sure that the battery is
    installed correctly.
    --This may prevent explosion
    or fire.

    • Incorrect battery replacement
    may cause fire.
    • Batteries: Store the accessories
    (battery, etc.) in a safe location
    out of the reach of children.

    
    Risk Group 2
    CAUTION Possibly hazardous
    optical radiation emitted from this
    product. Do not stare at operating
    lamp. May be harmful to the eye.



  • Page 15

    15

    CONTENTS
    2

    SAFETY PRECAUTIONS 3
    PREPARATION

    17

    Accessories

    17

    Optional Extras

    19

    Parts and Components

    20

    Using the Joystick Button
    --Basic Functions
    --Adjusting the Menu

    23
    23
    24

    Projector Status Indicators 24
    Installation
    25
    --Installation Precautions 25
    --Projection Distance per
    Screen Size
    26
    --How to Install the Projector
    On a Tripod
    27
    --Kensington Security System
    28

    REMOTE CONTROL

    29

    USING THE PROJECTOR 32
    Using The Battery

    32

    Battery using time information

    33
    Watching Projector
    34
    --Turning on the Projector 34
    --Focus of the Screen Image
    35
    --Watching With the Projector
    35
    Additional Options
    36
    --Adjusting Aspect Ratio
    36
    --Using the Keystone Function
    37
    --Changing Input Device 38
    --Blank Function
    40
    Using the Quick Menu

    41

    ENTERTAINMENT

    42

    Using SCREEN SHARE

    42

    Setting Up Bluetooth on the
    Projector
    43

    ENGLISH

    LICENSES



  • Page 16

    16

    ENGLISH

    --Searching for Bluetooth
    Devices and Connecting 44
    --Connecting, Disconnecting,
    or Deleting Bluetooth
    Devices in the List of
    registered devices
    46
    --Adjusting AV Sync. Adjust 47

    MY MEDIA

    48

    Before Using
    48
    --Connecting a USB Device 48
    --Removing a USB Device 48
    To Use My Media
    --Watching the Videos
    --Viewing the Photos
    --Listening to Music
    --Viewing Files

    50
    54
    60
    64
    68

    CUSTOMIZING SETTINGS

    72
    SETTINGS

    72

    PICTURE Settings

    73

    AUDIO Settings

    81

    TIME Settings

    82

    WIRELESS Settings

    83

    OPTION 1 Settings

    86

    OPTION 2 Settings

    87

    CONNECTING DEVICES 89
    Connecting to HD Receiver,
    DVD or External Devices
    90
    --HDMI Connection
    90
    Connecting a PC
    --HDMI Connection

    90
    90

    Connecting a Laptop
    --HDMI Connection

    91
    91

    Connecting to Headphones 92
    Using the Mirroring Function
    of a Mobile Phone
    93
    --MHL/Slimport Connection 93

    MAINTENANCE

    94

    Cleaning
    94
    --Cleaning the Lens
    94
    --Cleaning the Projector Case
    94

    SPECIFICATIONS

    95

    SYMBOLS

    99



  • Page 17

    17

    PREPARATION
    The pictures may differ slightly from the actual product.

    Accessories included with the projector are show below.
    Accessories are subject to change without prior notice.
    New accessories may be added or old ones removed.

    $3  7
    

    

    Remote Control,
    Lithium Battery
    (CR2032 / 3 V)

    Owner's Manual

    * Depending on country

    or
    AC-DC Adaptor

    Power cord

    AC-DC Adaptor

    ENGLISH

    Accessories



  • Page 18

    18

    ENGLISH

    • When connecting an HDMI or USB
    cable, or connecting a USB flash drive
    to the HDMI or USB port, use a product
    that has a width of 18 mm or less and
    a height of 10 mm or less. If the USB
    cable or USB flash drive does not fit
    the USB ports of the projector, use an
    extension cable that supports USB 2.0.
    • Use a certified cable with the HDMI logo attached.
    • If you do not use a certified HDMI cable, the screen may not display or a
    connection error may occur. (Recommended HDMI cable types)
    --High-Speed HDMI®/™ Cable
    --High-Speed HDMI®/™ Cable with Ethernet



  • Page 19

    19

    Optional Extras
    To purchase optional accessories, visit an electronics store or online
    shopping site or contact the retail store where you purchased the product.
    Optional accessories are subject to change without prior notice.

    ENGLISH

    Projection Screen

    MHL or Slimport cable

    Tripod

    HDMI Cable



  • Page 20

    20

    Parts and Components

    ENGLISH

    This projector is manufactured using high-precision technology. You may,
    however, see tiny black dots and/or bright colored dots (red, blue, or
    green) that continuously appear on the projector screen. This is a normal
    result of the manufacturing process and does not indicate a malfunction.
    Main Unit
    Speaker
    Vent

    1)

    Joystick button

    Vent1)

    Lens 2)

    Focus ring

    1) Due to the high temperature of vent area, do not get close to the vent area.
    2) Do not touch the lens when using the projector. The lens may be damaged.



  • Page 21

    21
    Side

    1

    ENGLISH

    1

    ON/OFF Switch
    --ON: Turns the projector on and the projector goes into Standby
    mode.
    --OFF: Turns the projector off completely.
    Place the switch to OFF when you move the projector or when you
    intend not to use the projector for long periods of time.



  • Page 22

    22
    Back

    1

    2

    3

    ENGLISH
    1

    Battery Charge Indicator
    --Red: Charging
    --Green: Charging complete

    2

    DC IN Port

    3
    4
    5

    (USB Port)
    Port
    (Headphone Port)

    4

    5



  • Page 23

    23

    Using the Joystick Button
    You can operate the projector by pressing the button or moving the joystick
    left, right, up, or down.

    Power On

    When the projector is turned off, place
    your finger on the joystick button,
    press it once, and release it.

    Power Off

    When the projector is turned on, place
    your finger on the joystick button,
    press it once for a few seconds, and
    release it. (However, if the menu
    button is on the screen, pressing and
    holding the joystick button will let you
    exit the menu.)

    Volume
    Control

    Place your finger over the joystick
    button and move it left or right. You
    can adjust the volume level.

    Up/Down/
    Left/Right

    If you move the joystick up, down, left,
    or right, you can move the cursor to
    select the menu items.

    NOTE
    • Move the joystick button up, down, left, or right. Be careful not to
    press the joystick button. If you press the button while moving the
    joystick, the volume control may not work, and the cursor may not
    move.

    ENGLISH

    Basic Functions



  • Page 24

    24

    Adjusting the Menu

    ENGLISH

    When the projector is turned on, press the joystick button one time.
    You can adjust the menu items ( ,
    , , ) moving the joystick
    button left, right, up, or down. Move to the desired menu item, and then
    press the joystick button once to select it.

    Close

    Projector off

    Turns the power off.

    Input List

    Changes the input source.

    Close

    Clears on-screen displays and
    returns to projector viewing.

    Settings

    Displays the Settings menu.

    Projector Status Indicators
    LED Power Indicator

    LED Power Indicator
    Red

    Power standby state

    Off

    The projector is operating with the power on.



  • Page 25

    25

    Installation
    Installation Precautions

    --Do not place the projector
    on a carpet or rug. If the
    projector's inlet vent is on
    the bottom, be careful not to
    block the vent and always use
    the projector on a solid, level
    surface.

    --Be sure to prevent foreign
    objects such as paper debris
    from entering the projector.

    • Do not place the projector in a
    hot, cool, or humid environment.
    • Do not place the projector in a
    place where it will easily attract
    dust.
    --This may result in fire.
    • Never open any cover on the
    projector. There is a high risk of
    electric shock.
    • The projector is manufactured
    using high-precision technology.
    You may, however, see tiny
    black dots and/or bright colored
    dots (red, blue or green) that
    continuously appear on the
    projector screen. This is a normal
    result of the manufacturing
    process and does not indicate a
    malfunction.
    • The remote control may not work
    in an environment where a lamp
    equipped with electronic ballasts
    or a three-wavelength fluorescent
    lamp is installed. Replace the
    lamp with an international
    standard lamp for the remote
    control to work normally.

    ENGLISH

    • Place the projector in a wellventilated environment.
    --To prevent internal
    overheating, install the
    projector in a well-ventilated
    place. Do not place anything
    near the projector that may
    block its air vents. If the air
    vents are blocked, the internal
    temperature of the projector
    will increase.

    --Leave an adequate open area
    (30 cm or more) around the
    projector.



  • Page 26

    26

    Projection Distance per Screen Size

    1  Place the projector on a sturdy, level surface, together with the PC or
    audio/video source.

    ENGLISH

    2  Place the projector an appropriate distance away from the screen. The
    distance between the projector and the screen determines the actual
    size of the image.

    3  Position the projector so that the lens is at a right angle to the screen.
    If the projector is not at a right angle, the projected image will look
    distorted. To correct the distortion, use the keystone function.
    (See page 37.)

    4  Connect the power cord of the projector and the connected device to
    the wall outlet.

    Ratio of upward projection: 100 %

    Y/2

    Screen

    Y/2

    X/2

    Projection Distance (D)

    Screen Width (Y)

    X/2

    Screen Height (X)

    Screen

    Projection Distance (D)

    16:9 Ratio
    Screen Size
    (mm)

    Screen Width
    (Y) (mm)

    Screen Height
    (X) (mm)

    Projection
    Distance (D)
    (mm)

    254
    508
    762
    1016
    1270
    1524
    1778
    2032
    2286
    2540

    221
    443
    664
    885
    1106
    1328
    1549
    1770
    1992
    2213

    124
    249
    374
    499
    623
    748
    873
    998
    1123
    1247

    335
    686
    1037
    1387
    1738
    2089
    2439
    2790
    3141
    3491



  • Page 27

    27

    How to Install the Projector On a Tripod

    Bottom side of the
    projector

    Bolt used to
    attach the
    projector



    +

    The projector is
    connected to this part.


    Tripod

    CAUTION
    • If you are using a tripod, be careful not to apply external force to the
    tripod. Doing so may damage the projector.
    • Do not place the tripod on an unstable surface.
    • Be sure to use a tripod with a maximum load capacity of 3 kg or
    more.
    • To use the projector safely, position the tripod legs so that they are
    as wide and stable as possible and be sure to securely attach the
    projector to the tripod.

    ENGLISH

    • You can install the projector using a camera tripod.
    • As shown below, you can mount the projector instead of a camera on
    the tripod.
    • When stabilizing the tripod, we recommend using a locking bolt of
    standard size 4.5 mm or less. The maximum size allowed for the locking
    bolt is 5.5 mm. (If it is longer than the maximum allowed size, it may
    damage the projector.)



  • Page 28

    28

    Kensington Security System

    ENGLISH

    • This projector has a Kensington Security Standard connector as an
    anti-theft mechanism. Connect a Kensington Security System cable as
    shown below.
    • For more information on installation and use of the Kensington Security
    System, refer to the user’s guide provided with the Kensington Security
    System.
    • The Kensington Security System is an optional accessory.
    • What is Kensington?
    Kensington is a company that provides safety systems for laptops and
    other electronic devices. Website: http://www.kensington.com



  • Page 29

    29

    REMOTE CONTROL

    Turns the projector on or off.
    Mutes the sound of the projector.
    Changes the input source.
    Adjusts the volume level.
    Moves to the previous/next page.

    Changes the picture mode.
    Up/Down/Left/Right buttons
    Sets the function or moves the cursor.
    Shows the current mode and saves
    changes to the settings.
    Displays a blank screen.
    Exits the menu.
    Returns to the previous screen.
    Displays or closes the Settings menu.
    Enters the quick menu.

    ENGLISH

    Open the battery cover on the back of the remote
    control and insert the batteries which are specified
    in the battery room with poles pointing in the
    correct direction. Use new batteries.



  • Page 30

    30

    ENGLISH

    Freezes the moving image.
    (Available in any mode other than USB
    mode.)
    Changes the aspect ratio of the screen
    per pressing of the button.
    Accesses USB mode.
    Enables the self-diagnosis.
    Adjusts the Keystone function.

    Playback control buttons
    Controls playback of MY MEDIA.
    Color buttons
    Sets detailed settings or gesture for each
    menu.



  • Page 31

    31

    NOTE

    ENGLISH

    • When using the remote control, the optimal
    operation range is 6 meters or less (left/right)
    and within a 30 degree arc of the remote control
    IR receiver.
    • If a cable is connected to the back port, the
    30° 30°
    optimal operating range is 3 meters or less (left/
    right) and within a 30 degree arc of the remote
    control IR receiver.
    • For seamless operation, do not block the IR
    receiver.
    • When you carry the remote control in the portable bag, make
    sure that the buttons on the remote control are not pressed by the
    projector, cables, documents, or any other accessories in the bag.
    Otherwise, it may significantly reduce the battery life.



  • Page 32

    32

    USING THE PROJECTOR
    ENGLISH

    Using The Battery

    The battery is low. Connect a power
    supply for charging.


    • It is displayed when the battery is low (Energy Saving will be changed
    Maximum mode and will be disabled).
    • If the screen shows a low battery message, be sure to charge the
    battery.

    The device powers off due to insufficient
    battery.


    • It is displayed when the battery is running out.
    • As your battery is running out, the projector will turn off immediately.
    • If the battery runs out, the projector can only be turned on after it has
    been connected to a power supply.



  • Page 33

    33

    Battery using time information
    Time and Display

    Charging

    About 3 hours (When in standby and charging)

    Usage
    Hours

    Up to 2.5 hours
    (Available battery using time up to 2.5 hours when
    Energy Saving mode set to Max.)

    Battery
    Level
    Indicator

    Step
    Step 11

    Step
    Step 22

    Step
    Step 33

    Step
    Step 44

    Step
    Step 55

    ENGLISH

    Status

    Full
    Full

    • If you do not intend to use the projector for a long time, leave the battery
    charged at 40 % to 50 %.
    • The battery is automatically recharged when the projector is connected
    to a power supply.
    • Charge the battery fully when you first use the projector.
    • The battery standard usage time given in the manual is based on
    measurements taken by LG; the actual time may vary depending upon
    usage.
    • Battery usage time may vary depending on broadcast type, operating
    temperature, period of use, and user preferences.
    • As the battery is consumable, its lifetime gradually decreases. When the
    battery’s life is reduced by half, replace it with a new battery from an LG
    Electronics Customer Support Center.
    • Do not charge the battery using any equipment other than that supplied
    with the product. This may damage the battery or cause a fire.
    • Always use a battery that is approved and certified by LG Electronics,
    Inc. Failure to do so may result in an explosion or fire.
    • If the battery is leaking or giving off an odor, discontinue its use
    immediately and contact LG Electronics Customer Support Center.
    • The battery contains lithium-ion, so please handle with care. Failure to
    do so may result in an explosion or fire.



  • Page 34

    34

    Watching Projector
    Turning on the Projector
    ENGLISH

    The menu screen display in this owner's manual is an example to help
    users understand how to operate the product and may look different from
    the actual screen.

    1  Connect the power cord correctly.
    2  Place the ON/OFF switch on the rear port area to ON and press the
    button on the joystick button or on the remote control. (If
    the switch is placed to OFF, the projector will not turn on.)

    3  In the Language Selection screen, select a language.
    4  In the Mode Setting screen, select the setting mode you want.
    Mode Setting
    Selecting the environment.
    Choose the setting mode you want.
    Select [Standard] to use this Projector at home. To use this
    Projector at store, select [Store Demo].

    Standard

    Store Demo

    Demo Mode

    Off

    Previous

    Confirm

    *S
     tore Demo is used when displaying the product in-store. The picture
    mode is automatically reset after a certain period of time. You can
    select Standard to use the product at home.
    5  Select an input signal by using the
    button on the remote
    control.



  • Page 35

    35

    Focus of the Screen Image

    Focus Ring

    Watching With the Projector

    1  When in standby mode, press the

    button to turn the

    projector on.

    2  Press the
    button and select the input signal you want.
    3  Control the projector using the following buttons while watching
    projector.

    Button

    Description
    Adjusts the volume level.
    Mutes all sounds.
    Accesses the quick menu.
    Resizes an image.
    Adjusts Keystone.

    4  To turn the projector off, press the

    button.

    ENGLISH

    When an image appears on the screen, check if it is in focus and fits the
    screen properly.
    Adjust the focus of the image by rotating the Focus Ring to the left or right.
    Make sure the product does not move when adjusting the focus.



  • Page 36

    36

    Additional Options
    Adjusting Aspect Ratio
    ENGLISH

    Resize an image to view at its optimal size by pressing
    are using the projector.

    while you

    NOTE
    • Available picture size may differ depending on the input signal.
    • You can also use the
    or
    button.
    Menu

    Description

    16:9

    Resizes images to the 16:9 ratio.

    Just Scan

    Displays video images in the original size without
    removing parts of the edge of the image.
    • If you select Just Scan, you may see image noise at
    the edge or edges of the screen.

    Set By
    Program

    Displays images in the same aspect ratio as the original
    image.

    4:3

    Resizes images to the previous standard 4:3.

    Zoom

    Resizes the image to fit the screen width. The top and
    bottom parts of the image may be cut off.
    • Press the
    or
    button to zoom in or out of the
    image.
    • Press the
    or
    button to move the image.

    Cinema
    Zoom 1

    Formats an image to the cinemascope ratio, 2.35:1.
    It ranges from 1 to 16.
    • Press the
    or
    button to zoom in or out of the
    image.
    • Press the
    or
    button to move the image.
    • If you enlarge or reduce an image, the image may be
    distorted.



  • Page 37

    37

    Using the Keystone Function

    • Keystone

    0

    ◀ -

    + ▶

    OK

    1  Press the KEY.S

    ,or KEY.S, button to adjust the picture.
    • Keystone can be adjusted from -40 to 40.

    2  Press the

    button when done.

    ENGLISH

    To prevent the screen image from becoming trapezoidal, Keystone
    adjusts the top and bottom width of the image if the projector is not set up
    at a right angle to the screen.
    Because the Keystone function may cause inferior screen image quality,
    use this function only when it is not possible to set up the projector at an
    optimal angle.



  • Page 38

    38

    Changing Input Device
    To select an external input

    ENGLISH

    Selects external input.
    The illustration of the menu may differ from the actual screen on the
    product.
    • Press the
    button on the remote control to display the input
    selection screen.
    --Connected inputs are displayed first. However, SCREEN SHARE
    input is always activated.
    • Select an input signal using the remote control's
    button to
    connect the projector to the desired input.
    You can use the
    or
    button to switch between all the input modes.
    Input List

    SCREEN SHARE



    ꔂ Move ꔉ OK

    USB

    HDMI

    Input Label

    Exit



  • Page 39

    39
    Selecting an Input Label
    Displays which devices are connected to which input ports.
    Input Label

    ENGLISH

    HDMI

    Close

    1  Press the

    selection screen.

    button on the remote control to display the input

    2  Press the Red button.
    3  Use the or button to select one of the input labels.



  • Page 40

    40

    Blank Function
    Using the Blank Function

    ENGLISH

    This function may be effective when you need to draw attention during a
    meeting or training.

    1  Press the

    button, and the screen is covered by the
    background color. You can change the background color by referring
    to Selecting a Blank Image.

    2  Press any button to clear the blank function. To cover the screen

    temporarily, press the
    button on the remote control. Do not
    block the lens with any object while the projector is running. It may
    become overheated and deformed or even cause a fire.

    Selecting a Blank Image

    1  Press the
    2  Press the
    the

    3  Press the
    button.

    4  Press the

    button.
    ,
    ,
    button.
    ,

    or
    and press the

    , or

    buttons to select OPTION 2 and press

    buttons to select Blank Image and press the
    button to move to the setting or option you want
    button.



  • Page 41

    41

    Using the Quick Menu
    You can easily customize your frequently used menus.
    button.
    or

    button to select a menu and press

    Menu

    button.

    Description

    Aspect Ratio

    Resizes the picture.

    PJT Mode

    Turns the projected image upside down or flips it
    horizontally.

    Picture Mode

    Changes the picture mode.

    Sound Mode

    Sets the sound mode.

    Sleep Timer

    Sets the projector to be turned off at the specified
    time.

    Clear Voice II

    Makes the voice from the projector crisp and clear.

    Energy
    Saving

    Reduces power consumption by adjusting peak
    screen brightness. (If the screen shows a low battery
    message, Energy Saving will be changed Maximum
    mode and will be disabled)

    USB Device

    Allows you to remove a connected USB device in a
    safe manner.
    (The menu is displayed only when the USB device is
    connected.)

    3  Press the

    or

    button to scroll through the following menus.

    ENGLISH

    1  Press the
    2  Press the



  • Page 42

    42

    ENTERTAINMENT
    ENGLISH

    Using SCREEN SHARE
    1  Set the external input of the projector to SCREEN SHARE.
    2  Enable related SCREEN SHARE function on the device you wish to
    connect.

    3  Connect the projector from the search list on the device you wish to

    connect. (When you connect the projector to your laptop, input the PIN
    code shown on your display. The request for a PIN will be shown only
    at the initial connection.)

    4  If the desired device accepts the request, SCREEN SHARE will be
    started.

    CAUTION
    • Windows 7 / 8 / 8.1 / 10 are compatible with SCREEN SHARE.
    However, other versions of Windows, and some other operating
    systems, may not be compatible with SCREEN SHARE.
    • Ice Cream Sandwich, Jellybean, KitKat, Lollypop, and Marshmallow
    versions of LG’s Android devices are guaranteed to be compatible.
    • When connecting via SCREEN SHARE, place the device close to
    the projector.
    • The response rate and image quality may vary depending upon the
    user’s environment.
    • For more information on the device you want to connect to, refer to
    its owner’s manual.
    • Certain Windows 8.1 laptops may have difficulty in reconnecting
    when initializing the device information during a wireless connection.
    In this case, it is recommended that you remove the registered
    device and reconnect.



  • Page 43

    43

    Setting Up Bluetooth on the Projector

    NOTE
    • The devices that can be connected are as follows: LG BTS1, LG
    HBS-700, LG HBS-730, LG HBS-800 (Models available for purchase
    may vary by region.)
    • Products from other manufacturers may not be compatible.
    • You can use the remote control to adjust the volume of the
    connected device.
    • When connecting devices wirelessly, if the device connection fails,
    check that the device is connected to a power supply and also check
    that the Bluetooth audio device is operating properly.
    • If Bluetooth is turned on, the projector will automatically connect
    to the last connected Bluetooth device when the projector powers
    on. (Be sure to check that the last connected Bluetooth device is
    powered on as well.)
    • This projector does not support the LG TV Sound Sync feature. To
    use products that support the LG TV Sound Sync feature, use the
    general Bluetooth mode instead of the LG TV mode.
    • The Bluetooth function is to connect the product to Bluetooth
    speakers or Bluetooth headset. You cannot connect the product to a
    mobile phone through the Bluetooth function.

    ENGLISH

    This option is used to output sound from the projector through Bluetooth
    audio devices.
    • Press the
    button on the remote control, and then set
    Bluetooth to On in the WIRELESS menu.



  • Page 44

    44

    Searching for Bluetooth Devices and Connecting

    ENGLISH

    Go to SETTINGS → WIRELESS → Search Device to search for nearby
    Bluetooth audio devices and then connect any detected devices to the
    projector.
    (If the device name is longer than 20 characters, no more than 20 will be
    displayed.)

    1  Set the Bluetooth device to pairing mode and then select Search

    Device.
    • Select Stop searching to view the devices detected so far.
    • If the device has not been detected, check that the device is powered
    on and in pairing mode.
    • The time it takes to search for devices may vary according to the
    signal strength and the number of devices.
    WIRELESS

    ꔂ Move ꔉ OK

    •• SCREEN SHARE

    : [PJTR][LG]PH150[0000]

    •• Group
    •• Channel
    •• Bluetooth

    : On

    •• Search Device
    •• List of registered devices
    •• AV Sync. Adjust



  • Page 45

    45

    2  When the search is complete, you can select a Bluetooth device and

    Search Device
    List

    Search Device
    Searching...

    Please wait.

    List

    Search complete

    HBS-700

    Press OK(ꔉ) to connect the device.

    Stop searching

    Close

    Re-search

    Close

    3  When a Bluetooth device is connected, you will hear sound from the

    projector through the connected device.
    • The connected Bluetooth device will be added automatically to the
    List of registered devices. Once registered, Bluetooth devices can
    be connected simply by selecting them from the List of registered
    devices without having to search for them.
    • Connected devices can only be disconnected from SETTINGS →
    WIRELESS → List of registered devices.

    ENGLISH

    connect to it.
    • You can stop the connection process immediately by selecting Stop
    searching.
    • The time it takes to connect to a device may vary according to the
    signal strength and the number of devices.



  • Page 46

    46

    Connecting, Disconnecting, or Deleting Bluetooth
    Devices in the List of registered devices

    ENGLISH

    In SETTINGS → WIRELESS → List of registered devices, Bluetooth
    devices are shown in the order that they were connected, and the same
    devices can be reconnected simply by selecting them without having to
    search for them again.
    List of registered devices
    List
    HBS-700

    Delete
    Press OK(ꔉ) to connect the device.

    Delete All

    Close

    Connecting
    Select a Bluetooth device from the List of registered devices to connect
    to it.
    • The registered Bluetooth device will attempt to connect automatically
    depending on the characteristics of the device. (Refer to the manual for
    the Bluetooth device.)
    • You can stop the connection process immediately by selecting Stop.
    • The time it takes to connect to a device may vary according to the signal
    strength and the number of devices.
    Disconnecting
    Select Disconnect to disconnect the device.
    • You can only disconnect a device from the List of registered devices.



  • Page 47

    47
    Deleting

    Adjusting AV Sync. Adjust
    When a Bluetooth device is connected, go to SETTINGS → WIRELESS
    → AV Sync. Adjust to adjust the synchronization between the video and
    the Bluetooth headset sound.
    • AV Sync. Adjust

    10 ◀


    OK

    • This feature is only available when a Bluetooth device is connected.
    • Audio sync may vary by manufacturer.
    • When playing video from a connected USB drive, AV Sync. Adjust can
    also be adjusted using the Set Audio. menu.

    ENGLISH

    Select Delete Marked or Delete All to delete any registered devices.
    • Delete Marked: Press the red button in List of registered devices to
    delete the selected device.
    • Delete All: Select Delete All in List of registered devices to delete all
    of the registered devices.



  • Page 48

    48

    MY MEDIA
    ENGLISH

    Before Using
    Connecting a USB Device
    Connect a USB device (external
    HDD, USB memory) to the USB port
    of projector to enjoy the content files
    stored in the USB device with your
    projector. You cannot write or delete
    data in the USB device. Connect a
    USB flash drive as shown below.

    USB flash
    Drive



    Removing a USB Device

    1  Click the
    2  Use the
    button.

    button.
    or

    button to move to USB Device and press the

    3  Select a USB to remove. Wait for confirmation that the USB device has
    stopped before removing the USB.



    NOTE
    • If detached early, an error may occur on the projector or the USB
    storage device.
    • Once a USB device has been selected for removal, it can no longer
    be read. Remove the USB storage device and then re-connect it.



  • Page 49

    49
    Tips for using a USB device

    ENGLISH

    • If the USB storage device has a built-in auto recognition program or uses
    its own driver, it may not work.
    • Some USB storage devices may not work or may work incorrectly.
    • If you use a USB extension cable, the USB device may not be
    recognized or may not work properly.
    • Use only USB storage devices formatted with the Windows FAT32 or
    NTFS file system.
    • For external USB HDDs, it is recommended that you use devices with a
    rated voltage of less than 5 V and a rated current of less than 500 mA.
    • It is recommended to use a Hard Disk Drive with its own power supply.
    (If the power being supplied is not sufficient, the USB storage device
    may not be detected correctly). Note, a USB Hub is not supported.
    • It is recommended that you use USB flash drives of 32 GB or less and
    USB HDDs of 2 TB or less.
    • If a USB HDD with power-saving function does not work properly, turn
    the power off and on. For more information, refer to the user manual of
    the USB HDD.
    • Data in USB storage device can be damaged so be sure to back
    up important files to other devices. Data maintenance is the user's
    responsibility and the manufacturer is not responsible for data loss.



  • Page 50

    50

    To Use My Media
    1  Press the
    button on the remote control.
    2  Select MY MEDIA.
    ENGLISH

    Select desired file from the list. Watch the chosen file.
    Sets play related settings by checking option during disk playback.
    My Media supporting file
    • Maximum data transmission rate: 20 Mbps (Mega bit per second)
    • External supported subtitle formats: *.smi, *.srt, *.sub (MicroDVD,
    SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX)
    • Internal supported subtitle formats: SRT/ASS/SSA (Supports internal
    subtitles generated from DivX6)



  • Page 51

    51
    Video Supported Codec
    Maximum: 1920 x 1080 @ 30p (only Motion JPEG 640 x 480 @ 30p)
    Extension

    .divx
    .avi
    .mp4
    .m4v
    .mov
    .mkv
    .ts
    .trp
    .tp
    .mts
    .m2ts
    .vob
    .mpg
    .mpeg

    Video

    VC-1 Advanced Profile, VC-1 Simple and Main
    Profiles

    Audio

    WMA Standard, WMA 9 Professional

    Video

    DivX3.11, DivX4, DivX5, DivX6, XVID,
    H.264/AVC

    Audio

    MPEG-1 Layer I, II, MPEG-1 Layer III (MP3),
    Dolby Digital

    Video

    H.264/AVC, MPEG-4 Part 2

    Audio

    AAC

    Video

    H.264/AVC

    Audio

    HE-AAC, Dolby Digital

    Video

    H.264/AVC, MPEG-2, VC-1

    Audio

    MPEG-1 Layer I, II, MPEG-1 Layer III (MP3),
    Dolby Digital, Dolby Digital Plus, AAC

    Video

    MPEG-1, MPEG-2

    Audio

    Dolby Digital, MPEG-1 Layer I, II, DVD-LPCM

    Video

    MPEG-1

    Audio

    MPEG-1 Layer I, II

    ENGLISH

    .asf
    .wmv

    Codec



  • Page 52

    52
    Audio File
    File type

    ENGLISH

    MP3
    AC3
    MPEG
    AAC,
    HEAAC
    CDDA

    LPCM

    Item

    Info

    Bit rate

    32 kbps to 320 kbps

    Sampling rate

    32 kHz to 48 kHz

    Bit rate

    32 kbps to 640 kbps

    Sampling rate

    32 kHz, 44.1 kHz, 48 kHz

    Bit rate

    32 kbps to 448 kbps

    Sampling rate

    32 kHz to 48 kHz

    Bit rate

    24 kbps to 3844 kbps

    Sampling rate

    8 kHz to 96 kHz

    Bit rate

    1.44 kbps

    Sampling rate

    44.1 kHz

    Bit rate

    1.41 Mbps to 9.6 Mbps

    Sampling rate

    Multi-channel : 44.1 kHz, 88.2 kHz /
    48 kHz, 96 kHz
    Stereo : 176.4 kHz, 192 kHz



  • Page 53

    53
    Available photo file
    File type

    BMP

    Info
    SOF0: Baseline, SOF1: Extend Sequential,
    SOF2: Progressive

    Picture
    Size

    Minimum: 64 x 64
    Maximum: Normal Type: 15360 (W) x 8640 (H)
    Progressive Type: 1920 (W) x 1440 (H)

    Picture
    Size

    Minimum: 64 x 64
    Maximum: 9600 (W) x 6400 (H)

    Support
    File type

    Interlace, Non-Interlace

    Picture
    Size

    Minimum: 64 x 64
    Maximum: Interlace: 1200 (W) x 800 (H)
    Non-Interlace: 9600 (W) x 6400 (H)

    PNG

    * BMP and PNG format files may be slower to display than JPEG.

    ENGLISH

    2D (jpeg,
    jpg, jpe)

    Item
    Support
    File type



  • Page 54

    54

    Watching the Videos
    In the Movie List, you can watch movies stored on the connected USB
    device.
    Controls playback and sets options while viewing videos.

    ENGLISH

    Tips for Playing Video Files
    • Some subtitles created by users may not work properly.
    • The video and subtitle files should be placed in the same folder. For
    subtitles to display correctly, the video and subtitle files must have the
    same name.
    • We do not support any stream that contains GMC (Global Motion
    Compensation) or Qpel (Quarterpel Motion Estimation).
    • Only H.264/AVC profile level 4.1 and lower is supported.
    • Video files that exceed 50 GB (gigabyte) are not supported for playback.
    The file size limit is dependent on the encoding environment.
    • DTS audio codec is not supported.



  • Page 55

    55
    Browsing Movie List
    Play a video file stored from a connected device.

    button.

    4  Use the

    ,
    ,
    button.

    the

    , or

    2

    1

    button to select the file you want and press

    4

    3

    Page 1/1

    Movie List
    USB STORAGE DEVICE

    Drive1

    Drive2

    Drive3

    Drive4

    5
    PAGE

    Drive5

    Page 1/1

    Butterfly_...
    01:34:33

    Go to root folder

    7

    Go to upper folder

    Exit

    8

    9

    No.

    Description
    Thumbnails

    1

    Abnormal file

    File not supported

    2

    File List

    3

    Moves to the upper level folder.

    4

    Current page/Total no. of folder pages

    5

    Displays the remaining battery life.

    6

    Current page/Total no. of file pages

    Page Change

    6

    ENGLISH

    1  Connect a USB storage device.
    2  Press the
    button.
    3  Use the , or button to select Movie List and press the



  • Page 56

    56
    No.

    Description

    ENGLISH

    7

    Moves to the top level folder.

    8

    Moves to the upper level folder.

    9

    Exit Movie List.

    5  Control playback by using the following buttons.


    Item

    Q.MENU

    Option

    Hide

    나가기Exit

    Description
    Shows the current playing position. Use
    move forward or backward.

    or

    buttons to

    Stops playing and returns to Movie List.
    Returns to normal playback.
    Pauses the media player.
    If no button is pressed on the remote control for 10 minutes
    after pausing, the playback is restarted.
    Displays in slow motion.

    Option
    Hide
    Exit

    Whenever this button is pressed, the playback speed is
    changed.: x2, x4, x8, x16, x32
    Reduces power consumption by adjusting peak screen
    brightness. (If the screen shows a low battery message,
    Energy Saving will be changed Maximum mode and will be
    disabled)
    A pop-up window will appear.
    Hides the playback bar. Press the
    appear.
    Returns to the Movie List screen.

    button to make it



  • Page 57

    57
    Options for Movie List

    1  Press the
    2  Use the

    button.

    3  Use the

    ,

    button to move to a desired option and press the
    ,

    , or

    button to set up each item.

    Set Video Play.
    Item
    Picture
    Size
    Audio
    Language

    Subtitle
    Language

    Repeat

    Description
    Selects the size of a playback screen.
    • Full: Files are played in full screen mode according to
    the aspect ratio of video.
    • Original: Displays the video in the original size.
    Allows you to select the language you want for the file with
    multiple audio tracks. This option is not available if the file
    has only one audio track.
    The subtitle can be turned on or off.
    • Language: One of any of the available languages can
    be selected.
    • Code Page: A character set used for a subtitle can
    be selected. By default, the subtitle is displayed in a
    language configured in OPTION 1 → Language.
    --Sync: If a subtitle is not synchronized with its video,
    you can adjust its speed at 0.5 seconds unit.
    --Position: Moves the location of a subtitle.
    --Size: Changes the subtitle font size.
    Turns the repeat function On or Off.
    When it is set to off, the next file can be played
    sequentially if the file name is similar.

    Set Video.
    You can change video settings. (Refer to PICTURE Settings on page 73.)
    Set Audio.
    You can change audio settings. (Refer to AUDIO Settings on page 81.)
    BLUETOOTH
    You can change Bluetooth settings. (Refer to Setting Up Bluetooth on the
    Projector on page 43.)

    ENGLISH

    or
    button.



  • Page 58

    58
    Registering the DivX code
    Checks DivX Reg. Code for replaying DivX protected videos. Register at
    http://vod.divx.com.
    Use Reg. Code to rent or purchase movies at www.divx.com/vod.

    ENGLISH

    1  In the Settings menu, move to OPTION 1 and press DivX(R) VOD.
    Registration
    Deregistration



    2  Press the

    or
    button.

    Close

    button to move to Registration and press the
    You must register your device to
    play DivX(R) protected videos.
    Registration code: XXXXXXXXXX
    Register at http://vod.divx.com



    OK

    3  Check the DivX Registration code.


    NOTE
    • Rented/purchased DivX files cannot be played if the DivX
    Registration Code of a different device is used. Use only the DivX
    Registration Code granted to this specific device.
    • Converted files not conforming to the DivX Codec Standard may not
    play or may produce abnormal sound.



  • Page 59

    59
    To deregister the DivX code
    Use the DivX deregistration code to deactivate the DivX DRM function.

    button.

    Registration
    Deregistration

    Close

    Your device is already registered.
    Are you sure you wish to deregister?
    Yes

    No

    Deregistration code : ********
    Deregister at http://vod.divx.com
    Continue with registration?
    Yes

    No

    3  Select Yes.


    NOTE
    • What is DRM [Digital Rights Management]?
    DRM technologies and services protect the interests and rights of
    copyright holders by preventing illegal use of digital content. Files
    can be played after the license is verified through an online method,
    etc.

    ENGLISH

    1  In the Settings menu, move to OPTION 1 and press DivX(R) VOD.
    2  Use the or button to go to Deregistration and press the



  • Page 60

    60

    Viewing the Photos
    You can view photos stored on a connected device.
    Supported Photo Files

    ENGLISH

    PHOTO (*.JPEG)
    Baseline: 64-pixel (width) x 64-pixel (height) - 15360-pixel (width) x
    8640-pixel (height)
    Progressive: 64-pixel (width) x 64-pixel (height) - 1920-pixel (width) x
    1440-pixel (height)
    • Non-supported files are displayed in the form of an icon.
    • An error message is displayed for corrupted files or file formats that
    cannot be played.
    • Corrupted files may not be displayed properly.
    • It may take some time to view high-resolution images in full screen.



  • Page 61

    61
    Browsing Photo List

    button.

    4  Use the

    ,
    ,
    button.

    the

    , or

    button to select the file you want and press

    4

    3

    2

    1

    Page 1/1

    Photo List
    USB STORAGE DEVICE

    Drive1

    Drive2

    Drive3

    Drive4

    5
    PAGE

    Drive5

    Page 1/1

    Butterfly_...
    06/09/2014

    Go to root folder

    Go to upper folder

    7

    Exit

    8

    No.

    9
    Description

    Thumbnails
    Abnormal file

    1
    File not supported

    2

    File List

    3

    Moves to the upper level folder.

    4

    Current page/Total no. of folder pages

    5

    Displays the remaining battery life.

    6

    Current page/Total no. of file pages

    7

    Moves to the top level folder.

    8

    Moves to the upper level folder.

    9

    Exits Photo List.

    Page Change

    6

    ENGLISH

    1  Connect a USB storage device.
    2  Press the
    button.
    3  Use the or buttons to select Photo List and press the



  • Page 62

    62

    5  Control playback by using the following buttons.
    01_a.jpg
    2008/12/10
    1920 x 1080
    479 KB
    [1/4]

    ENGLISH

    Slideshow

    Item

    BGM

    Q.MENU

    Option

    Hide

    Exit

    Description
    Selects the previous or next photo.

    Slideshow

    All photos are displayed during slide show.
    • Set Slide Speed in the Option → Set Photo View. menu.

    BGM

    You can listen to music while viewing photos in full size.
    • Set the BGM in the Option → Set Photo View. menu.
    Rotates photos.
    • Rotates a photo 90°, 180°, 270°, 360° clockwise.
    • Photos cannot be rotated if their width is greater than
    the height of the max. supported resolution.
    Views the photo in full mode or original mode.
    Press the blue button to enlarge the image.
    Reduces power consumption by adjusting peak screen
    brightness. (If the screen shows a low battery message,
    Energy Saving will be changed Maximum mode and will
    be disabled)

    Option

    A pop-up window will appear.

    Hide

    Hides the menu on the full size screen.
    • To see the menu, press the
    button on the
    remote control.

    Exit

    Exit from full screen photo view.



  • Page 63

    63
    Options for Photo List

    1  Press the
    2  Use the

    button.

    3  Use the

    ,

    button to move to a desired option and press the
    ,

    , or

    button to set up each item.

    Set Photo View.
    Item

    Description

    Slide speed

    Selects a slideshow speed.

    BGM

    Selects a music folder for the background music.
    • You cannot change the music folder while the
    background music is playing.
    • For background music, only the folder from the same
    device can be selected.
    --Repeat: Selects repeat play.
    --Random: Selects random play.

    Set Video.
    You can change video settings. (Refer to PICTURE Settings on page 73.)
    Set Audio.
    You can change audio settings. (Refer to AUDIO Settings on page 81.)
    BLUETOOTH
    You can change Bluetooth settings. (Refer to Setting Up Bluetooth on the
    Projector on page 43.)

    ENGLISH

    or
    button.



  • Page 64

    64

    Listening to Music
    You can play audio files stored on the connected device.
    Supported Music Files

    ENGLISH

    *.MP3
    Bit rate range 32 Kbps to 320 Kbps
    • Sampling rate MPEG1 Layer3: 32 kHz, 44.1 kHz, 48 kHz
    • Sampling rate MPEG2 Layer3: 16 kHz, 22.05 kHz, 24 kHz



  • Page 65

    65
    Browsing Music List

    button.

    4  Use the

    ,
    ,
    button.

    the

    , or

    button to select the file you want and press

    4

    3

    2

    1

    Page 1/1

    Music List
    USB STORAGE DEVICE

    Drive1

    Drive2

    Drive3

    Drive4

    5
    PAGE

    Drive5

    Page 1/1

    Butterfly_...
    03:25

    Go to root folder

    Go to upper folder

    7

    Exit

    8

    No.

    9
    Description

    Thumbnails
    Abnormal file

    1
    File not supported

    2

    File List

    3

    Moves to the upper level folder.

    4

    Current page/Total no. of folder pages

    5

    Displays the remaining battery life.

    6

    Current page/Total no. of file pages

    7

    Moves to the top level folder.

    8

    Moves to the upper level folder.

    9

    Exits Music List.

    Page Change

    6

    ENGLISH

    1  Connect a USB storage device.
    2  Press the
    button.
    3  Use the or button to select Music List and press the



  • Page 66

    66

    5  Control playback by using the following buttons.
    Page 1/1

    Music List
    USB STORAGE DEVICE

    Drive1

    PAGE

    Page Change

    Page 1/1

    Butterfly_...
    03:25

    ENGLISH

    002. - B02.mp3
    Q.MENU

    Item

    Option

    Hide

    Exit

    Description
    Changes the playing position.
    Stops playing.
    Returns to normal playback.
    Pauses the media player.
    Plays the previous/next file.
    Reduces power consumption by adjusting peak screen
    brightness. (If the screen shows a low battery message,
    Energy Saving will be changed Maximum mode and will
    be disabled)

    Option

    Sets up the options of Music List.

    Hide

    Hides the playback bar.
    • Press the
    button to make the playback bar
    appear.

    Exit

    Returns to the Music List screen.



  • Page 67

    67
    Options for Music List

    1  Press the
    2  Use the

    button.

    3  Use the

    ,

    button to move to a desired option and press the
    ,

    , or

    button to set up each item.

    Set Audio Play.
    Item

    Description

    Repeat

    Selects repeat play.

    Random

    Selects random play.

    Set Audio.
    You can change audio settings. (Refer to AUDIO Settings on page 81.)
    BLUETOOTH
    You can change Bluetooth settings. (Refer to Setting Up Bluetooth on the
    Projector on page 43.)

    ENGLISH

    or
    button.



  • Page 68

    68

    Viewing Files
    You can see document files stored on a connected device.
    Supported File Formats

    ENGLISH

    XLS, XLSX, DOC, DOCX, PPT, PPTX, TXT, PDF, HWP
    Microsoft Office: 97/2000/2002/2003/2007 Version
    Adobe PDF: 1.0/1.1/1.2/1.3/1.4 Version
    Hangul: 97/2000/2002/2005/2007 Version
    • File Viewer realigns a document, so it may look different from what is
    displayed on a PC.
    • For documents that include images, the resolution may look lower during
    the realigning process.
    • If the document is large or has many pages, it may take longer to load.
    • Unsupported fonts may be replaced by other fonts.
    • The file viewer may not open for Office documents that contain many
    high resolution images. In that case, reduce the image file size, save it
    on a USB storage device and run the file viewer again or connect your
    PC to the projector and open the file on your PC.



  • Page 69

    69
    Browsing File List

    the

    button.

    Page 1/1

    File List
    USB STORAGE DEVICE

    DOC

    3

    2

    1

    Drive1

    Drive2

    Drive3

    Drive4

    4
    PAGE

    Drive5

    Page 1/1

    Butterfly_...
    06/09/2014

    Go to root folder

    Go to upper folder

    Exit

    6

    7

    8

    No.

    Description

    1

    File List

    2

    Moves to the upper level folder.

    3

    Current page/Total no. of folder pages

    4

    Displays the remaining battery life.

    5

    Current page/Total no. of file pages

    6

    Moves to the top level folder.

    7

    Moves to the upper level folder.

    8

    Exits File List.

    Page Change

    5

    ENGLISH

    1  Connect a USB storage device.
    2  Press the
    button.
    3  Use the or button to select File List and press the
    button.
    4  Use the , , , or button to select the file you want and press



  • Page 70

    70

    5  Control playback by using the following buttons.

    ENGLISH

    • Click Go Page, then the pop-up window for selecting the number of
    page appears. Input the page to move to the page you want.
    • Press the
    button to zoom in or zoom out.
    Press the
    button and then use the Up/Down/Left/Right buttons to
    move to Go Page or Zoom.

    Go Page

    ꔦ Zoom

    Q.MENU

    Option

    Item

    Hide

    Exit

    Description

    Go Page

    Moves to the page you want.
    Use the Up/Down/Left/Right buttons to select a page
    and press the
    button.

    Zoom

    Enlarges or reduces the document.

    Option

    Sets up the options of File Viewer.

    Hide

    Hides the menu.
    • Press the

    Exit

    Returns to the File Viewer screen.

    button to make it appear.



  • Page 71

    71
    Options for File List

    1  Press the
    2  Use the

    button.
    ,

    ,

    , or

    button to set up each item.

    Item

    Single Page
    Loading

    Image Quality
    Docu­ment
    Align

    Description
    On

    Loads and displays pages one by one. The
    initial loading time is short but a content-heavy
    page may be displayed slowly.

    Off

    Loads all pages of a file to memory before it
    starts to display them. The initial loading time is
    long but you can navigate pages quickly after
    loading is complete.
    If a file is too large, it may fail to load all the
    pages.

    You can set the quality of the image included in the
    document. The following three options are available
    for the image quality: High, Medium, Low. Higher the
    image quality, lower the display time.
    Selects initial document align method.

    File Viewer settings are default, so close the currently opened document to
    apply changes to the new document, if any.

    ENGLISH

    Set FileViewer Option



  • Page 72

    72

    CUSTOMIZING SETTINGS
    ENGLISH

    SETTINGS
    1  Press the
    2  Use the ,
    3  Use the

    button.

    the

    ,
    button.

    , or

    button to select the desired item and press

    the

    ,
    ,
    button.

    , or

    button to set up the desired item and press

    4  Press the
    Menu

    button when completed.
    Description

    PICTURE

    Adjusts the image quality for optimal viewing.

    AUDIO

    Adjusts the sound quality and volume level.

    TIME

    Sets time-related settings.

    WIRELESS

    Wireless-related features.

    OPTION 1

    Customizes the general settings.

    OPTION 2

    Customizes the settings related the projector.

    INPUT

    Selects the desired input source.

    MY MEDIA

    Accesses photo, music, movie, and document files.



  • Page 73

    73

    PICTURE Settings
    1  Press the
    button.
    2  Use the , , , or
    3  Use the

    completed.

    ꔉ OK

    •• ꕊ Energy Saving : Minimum
    •• Picture Mode

    ,
    ,
    , or
    button to set up the desired
    item and press the
    button.
    --To return to the previous
    menu, press the
    button.

    4  Press the

    ꔂ Move

    ENGLISH

    buttons to select PICTURE
    and press the
    button.

    PICTURE

    : Standard

    •• Contrast 100
    •• Brightness 50
    •• Sharpness 20
    •• Color

    65

    •• Tint

    0

    R

    G

    button when

    The available picture settings are described as follows.
    Menu

    Energy
    Saving

    Description
    Reduces power consumption by adjusting peak
    screen brightness. (If the screen shows a low battery
    message, Energy Saving will be changed Maximum
    mode and will be disabled)
    Mode
    Minimum/
    Applies the pre-set Energy Saving
    Medium/
    mode.
    Maximum



  • Page 74

    74
    Description

    Picture Mode

    Selects the picture mode optimized for the viewing
    environment or the program.
    You can also customize advanced options for each
    mode.
    Mode
    Maximizes the visual effect of video.
    Vivid
    Heightens contrast, brightness, and
    sharpness to display vivid images.
    Displays images in standard levels of
    Standard
    contrast, brightness, and sharpness.
    Cinema
    Optimizes the image for a movie.
    Optimizes the image for sports by
    Sport
    emphasizing primary colors and
    dynamic actions.
    Optimizes the image for playing games
    Game
    on fast-moving screens.
    Menu for adjusting picture quality that
    allows experts and amateurs to enjoy
    the best projector viewing.
    Expert1 /
    --Expert mode is for picture tuning
    Expert2
    professionals to control and fine-tune
    using a specific image. For normal
    images, the effects may not be
    dramatic.

    Contrast

    Adjusts the difference between bright and dark
    regions of the screen.

    Brightness

    Adjusts the overall screen brightness.

    ENGLISH

    Menu



  • Page 75

    75
    Menu

    Description
    Adjusts the sharpness of the borders between bright
    and dark. Horizontal and Vertical Sharpness are
    available only in Expert1 / Expert2.

    Color

    Adjusts the intensity of all colors.

    Tint

    Adjusts the balance between red and green levels.

    Advanced
    Control

    Customizes the advanced settings.

    Picture Option

    Sets optional settings.

    Picture Reset

    Resets values customized by the user.
    Each picture mode is reset. Select the picture mode
    you wish to reset.

    Aspect Ratio

    Resizes the picture.

    ENGLISH

    Sharpness



  • Page 76

    76
    Advanced Control
    Menu

    Description

    ENGLISH

    Dynamic
    Contrast

    Adjusts contrast and color to the optimal level according
    to the screen’s brightness.

    Dynamic
    Color

    Adjusts colors for more natural-looking colors.

    Color
    Gamut

    Selects the range of colors that can be expressed.
    • Standard: Displays the original colors of an input
    signal regardless of the display features.
    • Wide: Makes use of the display's rich colors.

    Skin Color

    Skin color spectrum can be separately set to implement
    the skin color as defined by the user.

    Sky Color

    Sky color is set separately.

    Grass Color

    Natural color spectrum (meadows, hills, etc.) can be
    separately set.

    Gamma

    Sets the gradation curve according to the output of the
    picture signal in relation to the input signal.

    * Depending on input signal or other picture settings, the range of detailed
    items for adjustment may differ.



  • Page 77

    77
    Expert Control
    Menu

    Description
    Adjusts contrast and color to the optimal level
    according to the screen’s brightness.

    Color Gamut

    Selects the range of colors that can be expressed.
    • Standard: Displays the original colors of an input
    signal regardless of the display features.
    • Wide: Makes use of the display's rich colors.

    Edge
    Enhancer

    Shows clearer and distinctive yet natural edges of the
    video.

    Color Filter

    Filters a specific color spectrum in RGB colors to finetune color saturation and hue accurately.

    ENGLISH

    Dynamic
    Contrast



  • Page 78

    78
    Menu

    Description
    In Expert mode, you can customize the options of each
    mode.

    ENGLISH
    Color
    Temperature

    Gamma: Select 1.9, 2.2,or 2.4.
    a. Method: 2 Points
    --Pattern: Inner, Outer
    --Points: Low, High
    --Red/Green/Blue: The adjustment range for each
    color is from -50 to +50.
    --Apply to all inputs: The values of the Color
    Temperature is applied to all the input modes.
    b. Method: 20 Point IRE
    --Pattern: Inner, Outer
    --IRE (Institute of Radio Engineers) is the unit
    indicating the size of a video signal and can be
    set to 5,10,15, ... 100. You can fine-tune for each
    setting as shown below.
    --Luminance: The adjustment range is 50 to 500.
    --Red/Green/Blue: The adjustment range is -50 to
    +50.
    --Apply to all inputs: The values of the Color
    Temperature is applied to all the input modes.



  • Page 79

    79
    Description

    Color
    Management
    System

    Adjusts Red/Green/Blue/Cyan/Magenta/Yellow colors.
    Allows an expert to adjust the tint using a test pattern.
    Six colors (Red/Green/Blue/Cyan/Magenta/Yellow) can
    be selectively adjusted without affecting other colors.
    You may not see colors change on a normal picture
    even after adjustment.
    --Saturation Red/Green/Blue/Cyan/Magenta/
    Yellow,
    Tint Red/Green/Blue/Cyan/Magenta/Yellow,
    Luminance Red/Green/Blue/Cyan/Magenta/
    Yellow:
    The adjustment range is -30 to +30 each.

    * Depending on input signal or other picture settings, the range of detailed
    items for adjustment may differ.

    ENGLISH

    Menu



  • Page 80

    80
    Picture Option
    Menu

    Description

    ENGLISH

    Noise Reduction

    Reduces screen noise in the video.

    MPEG Noise
    Reduction

    Eliminates noise generated while creating digital
    picture signals.

    Black Level

    Adjusts the brightness or darkness of the screen
    to suit the black level of the picture input using the
    degree of darkness (black level) of the screen.

    Real Cinema

    Optimizes the screen for movie viewing.

    Color
    Temperature

    Adjusts the overall color of the screen to suit your
    preference.
    Select Warm, Natural, Cool, or Medium.



  • Page 81

    81

    AUDIO Settings
    1  Press the
    button.
    2  Use the , , , or

    •• Sound Mode

    ,
    ,
    , or
    button to set up the desired
    item and press the
    button.
    --To return to the previous
    menu, press the
    button.
    completed.

    ꔉ OK

    : Standard

    •• Clear Voice II

    3  Use the

    4  Press the

    ꔂ Move

    •• Auto Volume

    : Off

    button when

    The available audio settings are described as follows.
    Menu

    Description
    Sets the sound mode.

    Sound
    Mode

    Clear
    Voice II
    Auto
    Volume

    Standard
    News/Music/
    Cinema/
    Sport/Game

    Mode
    Suitable for all types of video.
    Sets audio optimized for a specific genre.

    Makes the voice from the projector crisp and clear.
    Automatically adjusts the volume level.

    ENGLISH

    button to select AUDIO and
    press the
    button.

    AUDIO



  • Page 82

    82

    TIME Settings
    1  Press the
    2  Use the , ,

    button.

    ENGLISH

    , or
    button to select TIME and
    press the
    button.

    3  Use the

    ,
    ,
    , or
    button to set up the desired
    item and press the
    button.
    --To return to the previous
    menu, press the
    button.

    4  Press the

    completed.

    TIME

    ꔂ Move

    •• Sleep Timer

    : Off

    •• Auto Off

    : 60 min.

    ꔉ OK

    •• Automatic Standby : 4 hours

    button when

    The available time settings are described as follows.
    Menu

    Description

    Sleep
    Timer

    Turns off the projector after a preset number of minutes.
    To cancel the Sleep Timer, select Off.

    Auto Off

    If there is no input signal or button press, the projector
    automatically turns off after the preset time has elapsed.

    Automatic
    Standby

    Turns off the projector automatically after a set period of
    time if there is no button input on the projector.



  • Page 83

    83

    WIRELESS Settings
    1  Press the
    button.
    2  Use the , , , or
    3  Use the

    ,
    ,
    , or
    button to set up the desired
    item and press the
    button.
    --To return to the previous
    menu, press the
    button.

    4  Press the

    completed.

    ꔂ Move

    •• SCREEN SHARE

    ꔉ OK

    : [PJTR][LG]PH150[0000]

    •• Group
    •• Channel
    •• Bluetooth

    : Off

    •• Search Device
    •• List of registered devices
    •• AV Sync. Adjust

    button when

    The available wireless settings are described as follows.

    ENGLISH

    button to select WIRELESS
    and press the
    button.

    WIRELESS



  • Page 84

    84
    Menu

    Description
    The SCREEN SHARE displays the screen of the
    connected device.
    • You can check the SCREEN SHARE's ID.

    ENGLISH

    Mode

    Group

    This is the group setting for each device
    supporting the SCREEN SHARE feature.
    When the wireless connection is weak
    or unstable, adjust the group setting to
    correct the problem.

    Channel

    You can change the channel used for
    wireless connections.
    • Search Channels: Select channel
    searching methods.
    --Auto: The projector searches for
    available channels and automatically
    selects the least used channel.
    --Manual: You can select a channel
    manually.
    • Channel: This is shown when Search
    Channels is set to Manual. It allows you
    to specify a channel number to use.

    SCREEN
    SHARE



  • Page 85

    85
    Menu

    Sound is output through the Bluetooth headset.
    First, set Bluetooth to On.
    Item
    Search
    Search for the device to connect to.
    Device
    List of
    Connected devices are saved in the List
    registered
    of registered devices. The saved list of
    devices
    registered devices can be displayed.
    When the video and the sound are not
    AV Sync.
    synchronized correctly, you can manually
    Adjust
    adjust the synchronization.

    ENGLISH

    Bluetooth

    Description



  • Page 86

    86

    OPTION 1 Settings
    1  Press the
    button.
    2  Use the , , , or
    ENGLISH

    button to select OPTION 1
    and press the
    button.

    3  Use the

    ,
    ,
    , or
    button to set up the desired
    item and press the
    button.
    --To return to the previous
    menu, press the
    button.

    4  Press the

    completed.

    OPTION 1

    ꔂ Move

    ꔉ OK

    •• Language
    •• DivX(R) VOD
    •• Initial Setting
    •• Mode Setting

    : Standard

    button when

    The available option 1 settings are described as follows.
    Menu

    Description

    Language

    Selects a desired Menu Language.

    DivX(R) VOD

    Sets DivX related settings.

    Initial Setting

    Resets all the projector settings to the factory default.
    Do not turn off the power during initialization.

    Mode Setting

    Selects Standard or Store Demo.
    When in use in home, please select Standard.
    Store Demo mode is for store display.



  • Page 87

    87

    OPTION 2 Settings
    1  Press the
    button.
    2  Use the , , , or

    OPTION 2

    ꔂ Move

    •• Keystone
    •• Auto Keystone

    : On

    ,
    ,
    , or
    button to set up the desired
    item and press the
    button.
    --To return to the previous
    menu, press the
    button.

    •• PJT Mode

    : Front

    •• High Altitude

    : Off

    3  Use the

    4  Press the

    •• Blank Image

    : Blue

    •• Auto Power

    : Off

    0

    +

    •• Self Diagnosis

    button when

    completed.

    The settings for option 2 are described as follows.
    Menu
    Keystone

    Auto
    Keystone

    Description
    To prevent the screen image from becoming trapezoidal,
    Keystone adjusts the top and bottom width of the image if
    the projector is not set at a right angle to the screen.
    Auto Keystone provides a rectangular screen image by
    automatically adjusting the Keystone number when there
    is a trapezoidal screen image caused by tilting of the
    projector.
    Item
    On

    Automatically adjusts the Keystone number.

    Off

    Manually adjusts the Keystone number.

    ENGLISH

    button to select OPTION 2
    and press the
    button.

    ꔉ OK

    -



  • Page 88

    88

    ENGLISH

    Menu

    Description

    PJT Mode

    This function turns the projected image upside down or
    flips horizontal.
    • Select Rear when projecting from the back of the
    transparent screen purchased separately.
    • Select Front Ceiling when installing the product on the
    ceiling.

    High
    Altitude

    If the projector is used at an altitude higher than 1200
    meters, turn this on.
    Otherwise, the projector may overheat or its protection
    function may be activated. If this happens, turn the
    projector off and then on again after waiting for several
    minutes.

    Blank
    Image

    Selects a background for blank image.
    Makes the projector turn on automatically when the
    adaptor plug is inserted.

    Auto
    Power

    Self
    Diagnosis

    Item
    On

    When the AC/DC plug is connected to the
    projector, it turns on automatically.

    Off

    When the AC/DC plug is connected to the
    projector, it goes into standby mode.

    Troubleshoots functional problems that can arise while
    using the product.



  • Page 89

    89

    CONNECTING DEVICES
    You can connect various external devices to the projector.



    DVD

    Digital Device

    Headphones

    HDMI - Page 90
    USB Device - Page 48
    Headphone - Page 92
    Mobile Phone (MHL/Slimport) - Page 93

    USB

    Game Console

    Mobile Phone

    ENGLISH

    Computer/Notebook



  • Page 90

    90

    Connecting to HD
    Receiver, DVD or
    External Devices
    ENGLISH

    Connect an HD receiver, DVD or
    External Devices to the projector
    and select an appropriate input
    mode.

    HDMI Connection
    With an HDMI cable, you can
    enjoy high quality picture and
    sound.
    Using a HDMI cable, connect the
    port of the projector
    to the HDMI output port of the
    device to connect. Both video and
    audio are output at the same time.
    Press the
    button on the
    remote control to select HDMI.

    Connecting a PC
    The projector supports Plug and
    Play. Your PC will automatically
    detect the projector and requires
    no driver installation.

    HDMI Connection
    Using an HDMI cable, connect the
    port of the projector
    to the HDMI output port of your
    PC. Both video and audio are
    output at the same time.
    Press the
    button on the
    remote control to select HDMI.

    * Optional
    Extras

    * Optional
    Extras
    +'0,

    +'0,



  • Page 91

    91

    Connecting a Laptop
    You can connect the projector to a
    laptop to use various functions.

    Using an HDMI cable, connect the
    port of the projector
    to the HDMI output port of your
    laptop. Both video and audio are
    output at the same time.
    Press the
    button on the
    remote control to select HDMI.

    * Optional
    Extras

    +'0,

    Brand

    Switching
    Output

    NEC

    Fn + F3

    Panasonic

    Fn + F3

    Toshiba

    Fn + F5

    IBM

    Fn + F7

    Sony

    Fn + F7

    Fujitsu

    Fn + F10

    LG

    Fn + F7

    Samsung

    Fn + F4

    Macintosh

    Adjust the control
    panel to enable
    mirroring after
    start-up.

    ENGLISH

    HDMI Connection

    The table below shows examples
    of switching the output. For
    more information, refer to the
    External Output, Connecting to
    an External Monitor, or similar
    sections of the owner's manual of
    your computer.



  • Page 92

    92

    Connecting to
    Headphones
    You can listen to the audio through
    a headphone.

    ENGLISH
    * Not
    provided



  • Page 93

    93

    Using the Mirroring Function of a Mobile
    Phone
    You must use a HDMI adapter to connect your cell phone to the projector
    and to output images and sound from your cell phone to the projector.
    The compatible HDMI adapters are different, depending upon your cell
    phone type.
    Therefore, purchase an appropriate MHL or Slimport adapter.
    (To find out whether your device is MHL/Slimport-certified, please contact
    your device manufacturer.)

    * Optional Extras

    NOTE
    • When you connect a mobile phone to the
    port, you can
    see the mobile phone screen through a projector.
    –– This only applies to mobile phones that support MHL/Slimport.
    –– You can use the remote control for some applications.
    • Disconnect the MHL/Slimport cable from the projector when:
    –– The MHL/Slimport function is disabled.
    –– Your mobile device is fully charged in standby mode.

    ENGLISH

    MHL/Slimport Connection



  • Page 94

    94

    MAINTENANCE
    Clean your projector to keep it in optimal condition.

    ENGLISH

    Cleaning
    Cleaning the Lens
    If there is any dust or staining on the lens surface, you must clean the lens.
    Use an air spray or a cleaning cloth to clean the lens.
    To remove dust or stains, use an air spray or apply a small amount of
    cleaning agent onto a swab or soft cloth to lightly rub the lens.
    Please be aware that liquid may flow into the lens if the product is sprayed
    directly onto the lens.

    Cleaning the Projector Case
    To clean the projector case, first unplug the power cord.
    To remove dust or stains, use only a dry, lint-free, nonabrasive cloth to
    polish the lens.
    Do not use alcohol, benzene, thinners, or other chemicals, which may
    damage the case.



  • Page 95

    95

    SPECIFICATIONS
    MODEL

    AC-DC Adaptor

    Audio Output
    Height
    Width
    Depth
    Weight
    USB Device

    Environment
    Condition

    PH150G (PH150G-GL)
    1280 (Horizontal) × 720 (Vertical)
    16:9 (Horizontal:Vertical)
    9.398 mm
    335 mm to 3491 mm (254 mm to 2540 mm)
    100 %
    6m
    35 W
    Depending on country
    Only India
    Manufacturer :
    Manufacturer :
    Manufacturer :
    Honor
    Honor
    APD
    Model :
    Model :
    Model :
    ADS-40FSG-19 ADS-40SG-19-3
    DA-65G19
    19032GPG-1
    19032G
    19 V
    1.7 A
    19 V
    3.42 A
    (Adaptor Input 100-240 V @ 50/60 Hz)
    1W
    44.3 mm (without foot) / 45.2 mm (with foot)
    115 mm
    115 mm
    0.46 kg
    5 V, 0.5 A (Max.)
    Temperature
    Operation
    0 °C to 40 °C
    Storage
    -20 °C to 60 °C
    Relative Humidity
    Operation
    Storage

    0 % to 80 %
    0 % to 85 %

    * Use only power supplies listed in the user instructions.
    * Contents in this manual may be changed without prior notice due to
    upgrade of product functions.

    ENGLISH

    Resolution (Pixel)
    Aspect ratio
    Panel size
    Projection distance
    (Video size)
    Ratio of upward
    projection
    Working range of
    the remote control
    Power
    consumption



  • Page 96

    96
    Supported HDMI(PC) Mode

    ENGLISH

    Resolution

    Horizontal Frequency
    (kHz)

    Vertical Frequency
    (Hz)

    640 x 350

    31.468

    70.09

    720 x 400

    31.469

    70.08

    640 x 480

    31.469

    59.94

    800 x 600

    37.879

    60.31

    1024 x 768

    48.363

    60.00

    1152 x 864

    54.348

    60.053

    1280 x 720

    45.00

    60

    1280 x 1024

    63.981

    60.02

    1440 x 900

    55.935

    59.888

    1400 x 1050

    65.317

    59.979

    1600 x 900

    60

    60

    1680 x 1050

    65.3

    60

    1920 x 1080

    67.5

    60

    • If an invalid signal is input into the projector, it will not be displayed
    properly on the screen or a message such as No Signal or Invalid
    Format will be displayed.
    • The projector supports the DDC1/2B type as the Plug and Play function
    (Auto-recognition of PC monitor).
    • In PC mode, 1280 x 720 is recommended for the best picture quality.



  • Page 97

    97
    Supported HDMI-DTV Mode

    Horizontal Frequency
    (kHz)

    Vertical Frequency
    (Hz)

    480p

    31.47
    31.47
    31.50

    60
    59.94
    60

    576p

    31.25

    50

    720p

    45.00
    44.96
    37.5

    60.00
    59.94
    50

    1080i

    33.75
    33.72
    28.125

    60.00
    59.94
    50

    1080p

    67.500
    67.432
    27.000
    26.97
    33.75
    33.71
    56.25

    60
    59.939
    24.000
    23.976
    30.000
    29.97
    50

    • To provide the best picture quality, a 720p resolution is recommended.

    ENGLISH

    Resolution



  • Page 98

    98
    Open Source Software Notice Information

    ENGLISH

    To obtain the source code under GPL, LGPL, MPL, and other open source
    licenses, that is contained in this product,
    please visit http://opensource.lge.com.
    In addition to the source code, all referred license terms, warranty
    disclaimers and copyright notices are available for download.
    LG Electronics will also provide open source code to you on CD-ROM for a
    charge covering the cost of performing such distribution (such as the cost
    of media, shipping, and handling) upon email request to
    opensource@lge.com. This offer is valid for three (3) years from the date
    on which you purchased the product.



  • Page 99

    99

    SYMBOLS
    Refers to alternating current(AC).
    Refers to class II equipment.
    Refers to stand-by.
    Refers to “ON” (power).
    Refers to dangerous voltage.

    ENGLISH

    Refers to direct current(DC).



  • Page 100






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für LG PH150G wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von LG PH150G in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 3,14 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von LG PH150G

LG PH150G Bedienungsanleitung - Deutsch - 100 seiten

LG PH150G Kurzanleitung - Englisch - 1 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info