INSTALLER’S SETTING OPTIONS
205
ENGLISH
204
INSTALLER’S SETTING OPTIONS
Setting temperature range (air conditioner)
This function using in 2 Set control mode.
This function is used for select setting temperature range option.
● Press and hold ‘wireless remote controller signal receiver part’ of the remote controller for
3seconds or longer to enter the installer function.
● Select remote controller temperature range setting code value ‘31’.
- You can press ‘▲’, ‘▼’ button to change the code value.
● In value1, use ‘▲’, ‘▼’ button to select temperature range setting value, and press ‘Done’ but-
ton to complete setting.
- If you do not press ‘Done’ button, the setting value will not be applied.
h Setting value
- 000 : 60~86 °F / 16~30 °C (default)
- 001 : 40~99 °F / 4~37.5 °C
h When the set values are changed, the items below will be initialized.
- Setting temperature (default: Cooling: 86 °F(30 °C)/ Heating: 60 °F(16 °C))
- Set back temperature (default: Cooling: 86 °F(30 °C)/ Heating: 60 °F(16 °C))
In case of the setting temperature range option2( 31:001), please note that the setting of the re-
mote controller (with cable) can be altered under below circumstances. (Changes in setting ex-
ample)
- In case of cooling at 30~37.5 °C(64~99 °F), it is changed to cooling at 86 °F(30 °C).
- In case of heating at 4~15.5 °C(40~86 °F), it is changed to heating at 60 °F(16 °C).
- If it is on the 2Set Mode, it is changed to the current operation mode(cooling or heating) of the
indoor unit.
Situation where changes in the setting occur
a. Operates the Auto address work and pipe search in situations such as product installment and
service.
b. Occurrence of errors and deactivation.
c. Command generated by the central control, outdoor unit, Dry contact, Remote controller, in-
door unit switch.
