Bedienungsanleitung Liebherr CUfr 2331 (Seite 11 von 12) (Englisch)

804838

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

uNotify the customer service, specifying the fault, appliance

designation

Fig. 10 (1)

, service No.

Fig. 10 (2)

and serial No.

Fig. 10 (3)

wThis will help us to provide you with a faster and more accu-

rate service.

uKeep the appliance closed until the customer service

arrives.

wThe food will stay cool longer.

uPull out the mains plug (not by pulling the connecting cable)

or switch off the fuse.

7 Malfunctions

Your appliance is designed and manufactured for a long life

span and reliable operation. If a malfunction nonetheless

occurs during operation, check whether it is due to a handling

error. In this case you will have to be charged for the costs

incurred, even during the warranty period. You may be able to

rectify the following faults yourself:

Appliance does not work.

→The appliance is not switched on.

uSwitch on the appliance.

→The power plug is not properly inserted in the wall socket.

uCheck power plug.

→The fuse of the wall socket is not in order.

uCheck fuse.

The compressor runs for a long time.

→The compressor switches to a low speed when little cold is

needed. Although the running time is increased as a result,

energy is saved.

uThis is normal in energy-saving models.

A LED on the bottom rear of the appliance (at the

compressor) flashes regularly every 15 seconds*.

→The inverter is equipped with a diagnostic LED.

uThe flashing is normal.

Excessive noise.

→Due to the various speed steps, speed-regulated* compres-

sors can generate different running noises.

uThe sound is normal.

A bubbling and gurgling noise.

→This noise comes from the refrigerant flowing in the refriger-

ation circuit.

uThe sound is normal.

A quiet clicking noise.

→The noise is produced whenever the refrigeration unit

(motor) automatically switches on or off.

uThe sound is normal.

A hum. It is briefly a little louder when the refrigeration

unit (the motor) switches on.

→The refrigeration increases automatically when fresh food

has just been placed in the appliance or the door has been

left open for a while.

uThe sound is normal.

→The ambient temperature is too high.

uSolution: (see 1.2 Appliance range of use)

Vibration noises

→The appliance is not standing firmly on the floor. As a result

objects and adjacent units start to vibrate when the refriger-

ator is running.

uAlign the appliance using the adjustable feet.

uKeep bottles and jars apart.

The outer surfaces of the appliance are warm*.

→The heat of the refrigeration circuit is used to prevent

condensate from forming.

uThis is normal.

The temperature is not cold enough.

→The door of the appliance is not properly closed.

uClose the door of the appliance.

→Insufficient ventilation.

uKeep ventilation grille clear, and clean it.

→The ambient temperature is too high.

uSolution: (see 1.2 Appliance range of use) .

→The appliance was opened too frequently or for too long.

uWait to see whether the appliance reaches the required

temperature by itself. If not, please contact the after sales

service (see 6 Maintenance) .

→The appliance is too close to a source of heat (stove, heater

etc).

uChange the position of the appliance or the source of heat.

The internal light does not come on.

→The appliance is not switched on.

uSwitch the appliance on.

→The lamp (if the model comes with an LED lamp) is faulty.

WARNING

Risk of injury from LED light!

The light intensity of the LED lighting corresponds to risk group

RG 2.

If the cover is removed:

uDo not look directly into the light at close quarters through

optical lenses. Doing so may damage your eyes.

uChange the lamp (see 6 Maintenance) .

With an ambient temperature below 18 °C the device is

slightly warmed in places on the inner surface of the

fridge compartment's right side wall.

→This is a necessary part of the function.

uThis is normal.

8 Decommissioning

8.1 Switching off the appliance

uTurn temperature control

Fig. 3 (1)

to 0.

8.2 Taking the appliance out of service

uEmpty the appliance.

uSwitch off the appliance (see 8 Decommissioning) .

uRemove mains connector.

uClean the appliance (see 6.2 Cleaning the appli-

ance) .

uLeave the door open to prevent odour.

9 Disposing of the appliance

The appliance contains some reusable materials

and should be disposed of properly - not simply

with unsorted household refuse. Appliances which

are no longer needed must be disposed of in a

professional and appropriate way, in accordance

with the current local regulations and laws.

When disposing of the appliance, ensure that the refrigeration

circuit is not damaged to prevent uncontrolled escape of the

refrigerant it contains (data on type plate) and oil.

uDisable the appliance.

uPull out the plug.

uCut through the connecting cable.

Malfunctions

* Depending on model and options 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr CUfr 2331 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr CUfr 2331

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info