111984
12
Zoom out
Zoom in
Vorherige Seite
1/14
Nächste Seite
Defect Cause Remedy
Vibration noises The appliance is not standing
firmly on the floor. As a result
objects and adjacent units start
to vibrate when the refrigerator is
running.
uAlign the appliance using the adjustable feet.
The temperature
display indicates:
F0 to F5.
There is a fault. uPlease contact the after-sales service (see 6 Mainte‐
nance) .
Power failure
flashes in
the temperature
display . The
highest tempera‐
ture reached
during power
failure is indicated
in the temperature
display.
The freezer temperature rose too
high over the last hours or days
due to a power failure or power
interruption. When the power inter
ruption is over, the appliance will
continue to operate in the last
temperature setting.
uTo cancel the display of the warmest temperature: press
alarm button Fig. 3 (9).
uCheck the quality of the food. Do not consume spoiled
food. Do not re-freeze thawed food.
DEMO shines in
the temperature
display.
The demo mode is activated. uPlease contact the after-sales service (see 6 Mainte‐
nance) .
The outer surfaces
of the appliance
are warm*.
The heat of the refrigeration circuit
is used to prevent condensate from
forming.
uThis is normal.
The temperature is
not cold enough.
The door of the appliance is not
properly closed.
uClose the door of the appliance.
Insufficient ventilation. uKeep ventilation grille clear, and clean it.
The ambient temperature is too
high.
uSolution: (see 1.2 Appliance range of use) .
The appliance was opened too
frequently or for too long.
uWait to see whether the appliance reaches the required
temperature by itself. If not, please contact the after
sales service (see 6 Maintenance) .
Too much fresh food was placed
inside without SuperFrost.
uSolution: (see 5.7 SuperFrost)
The temperature is incorrectly set. uSet the temperature to a colder setting and check after
24 hours.
The appliance is too close to a
source of heat (stove, heater etc).
uChange the position of the appliance or the source of
heat.
Dashes (- -) are
shown on the
display.
The freezing temperature has risen
above zero degrees because of a
power cut or power interruption.
uSee also "Power failure" and " "
Concentrated
collection of ice
on inside face at
centre of appliance
cover.
This build-up of ice is normal. Due
to physical properties, ice concen‐
trates inside the top of the appli‐
ance.
uRemove the ice with a scraper tool.
8 Decommissioning
8.1 Switching off the appliance
uPress the On/Off button Fig. 3 (1) until the display goes
dark. Release button.
wIf the appliance cannot be switched off, the child lock
function is active (see 5.2 Child proofing) .
8.2 Taking the appliance out of service
uEmpty the appliance.
uSwitch off the appliance (see 8 Decommissioning) .
uRemove mains connector.
uClean the appliance (see 6.2 Cleaning the appli‐
ance) .
uLeave the door open to prevent odour.
Decommissioning
12 * Depending on model and options
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

liebherr-gp-1466

Suche zurücksetzen

  • Wie bringe ich mein Gerät nach längerem Stromausfall zum Kühlen? Eingereicht am 4-5-2022 18:13

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Liebherr GP 1466 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Liebherr GP 1466

Liebherr GP 1466 Bedienungsanleitung - Deutsch - 14 seiten

Liebherr GP 1466 Bedienungsanleitung - Holländisch - 5 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info