Bedienungsanleitung Liebherr SBSes7273 (Seite 14 von 16) (Englisch)

57026

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

6.6 Customer service

First check whether you can correct the fault yourself by refer-

ence to the list (see Malfunction). If this is not the case, please

contact the customer service whose address is given in the

enclosed customer service list.

WARNING

Risk of injury if repair work is not carried out professionally!

uHave any repairs and action - not expressly specified - on

the appliance and mains cable carried out by service

personnel only. (see Maintenance)

uRead the appliance

designation

Fig. 10 (1)

, service

No.

Fig. 10 (2)

and

serial No.

Fig. 10 (3)

off the type plate

located inside the

appliance on the left-

hand side.

Fig. 10

uNotify the customer service, specifying the fault, appliance

designation

Fig. 10 (1)

, service No.

Fig. 10 (2)

and serial No.

Fig. 10 (3)

wThis will help us to provide you with a faster and more accu-

rate service.

uKeep the appliance closed until the customer service

arrives.

wThe food will stay cool longer.

uPull out the mains plug (not by pulling the connecting cable)

or switch off the fuse.

7 Malfunction

Your appliance is designed and manufactured for a long life

span and reliable operation. If a malfunction nonetheless

occurs during operation, check whether it is due to a handling

error. In this case you will have to be charged for the costs

incurred, even during the warranty period. You may be able to

rectify the following faults yourself:

Appliance does not work.

→The appliance is not switched on.

uSwitch on the appliance.

→The power plug is not properly inserted in the wall socket.

uCheck power plug.

→The fuse of the wall socket is not in order.

uCheck fuse.

The compressor runs for a long time.

→The compressor switches to a low speed when little cold is

needed. Although the running time is increased as a result,

energy is saved.

uThis is normal in energy-saving models.

→SuperFrost is activated.

uThe compressor runs for longer in order to rapidly cool the

food. This is normal.

→SuperCool is activated.

uThe compressor runs for longer in order to rapidly cool the

food. This is normal.

A LED on the bottom rear of the appliance (at the

compressor) flashes regularly every 15 seconds*.

→The inverter is equipped with a diagnostic LED.

uThe flashing is normal.

Excessive noise.

→Speed-controlled* compressors may produce varying

running noise due to different speed steps.

uThe sound is normal.

A bubbling and gurgling noise.

→This noise comes from the refrigerant flowing in the refriger-

ation circuit.

uThe sound is normal.

A quiet clicking noise.

→The noise is produced whenever the refrigeration unit

(motor) automatically switches on or off.

uThe sound is normal.

A hum. It is briefly a little louder when the refrigeration

unit (the motor) switches on.

→The refrigeration increases automatically when the Super-

Frost, function is activated, fresh food has just been placed

in the appliance or the door has been left open for a while.

uThe sound is normal.

→The refrigeration increases automatically when the Super-

Cool function is activated, fresh food has just been placed

in the appliance or the door has been left open for a while.

uThe sound is normal.

→The ambient temperature is too high.

uSolution: (see 1.2)

A low hum.

→The sound is produced by air flow noise of the fan.

uThe sound is normal.

Vibratory noise.

→The appliance is not standing firmly on the floor. As a result,

adjoining units or objects are set into vibration by the

running refrigeration unit.

uMove the appliance away a little and align it using the

adjustable feet.

uMove bottles and containers apart.

Flow sound at the soft stop mechanism.

→The noise is produced when the door is opened and

closed.

uThe sound is normal.

The temperature display indicates: nC, at the same time

the audible alarm sounds.

→The two appliances are not electrically interconnected.

uConnect the appliances by way of the bus cable housing.

See installation instructions, section on fitting hoses

and cables.

uIf the nC display persists, contact customer service.

The temperature display indicates: F0 to F9

→There is a fault.

uContact the customer service. (see Maintenance).

The temperature display reads:FE

→There is a fault.

uContact the customer service. (see Maintenance).

The temperature display indicates power failure . The

warmest temperature reached during the power failure

appears in the temperature display.

→The freezer temperature rose too high over the last hours or

days due to a power failure or power interruption. When the

power interruption is over, the appliance will continue to

operate in the last temperature setting.

uTo cancel the display of the warmest temperature: press

alarm button

Fig. 2 (2)

uCheck the quality of the food. Do not consume spoiled food.

Do not re-freeze thawed food.

DEMO shines in the temperature display.

→The demo mode is activated.

uContact the customer service. (see Maintenance).

Malfunction

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr SBSes7273 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr SBSes7273

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info