Bedienungsanleitung LifeGear Advanced - Magnetic Upright Bike 20390 (Seite 5 von 17) (Englisch)

552432

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

COMPUTER FUNTIONS:

AUTO ON/OFF: When you start to exercise or press any key on the computer, the computer

will turn on. If you leave the equipment for 4 minutes, the power will turn off automatically.

SCAN: Press MODE button until the screen displays a flash SCAN; the computer will

automatically scan the function of TIME, SPEED, DIST (DISTANCE), CAL (CALORIES),

ODO (ODOMETER), and (PULSE) every 6 seconds.

TIME: Press MODE button until the screen displays TIME; the computer will display your

elapsed workout time in minutes and seconds. When you start to exercise, time starts

counting up from 0:00 to 99:59 minutes per 1 second increment. You may also preset

target time before training. Press MODE button to select TIME function and then press

SET button to preset target time. Press RESET button to clear the target values of TIME to

zero. The preset target time range is from 0:00 to 99:00 minutes. Once you preset target

time and then start to exercise, time starts counting down from preset target time to 0:00 per

1 second backward. When the preset target time counts down to 0:00, time will start to

count up immediately and the computer will begin beeping to remind you.

SPEED: Press MODE button until the screen displays SPEED; the computer will display the

current training speed.

DIST (DISTANCE): Press MODE button until the screen displays DIST; the computer will

display the accumulative distance traveled during workout. When you start to exercise,

distance starts counting up from 0.0 to 999.9km per 0.1km increment. You may also preset

target distance before training. Press MODE button to select DIST function and then press

SET button to preset target distance. Press RESET button to clear the target values of

DISTANCE to zero. The preset target distance range is from 0.0 to 999.0km. Once you

preset target distance and then start to exercise, distance starts counting down from preset

target distance to 0.0 per 0.1km backward. When the preset target distance counts down

to 0.0, distance will start to count up immediately and the computer will begin beeping to

remind you.

CAL (CALORIES): Press MODE button until the screen displays CAL; the computer will

display the total accumulated calories burned during workout. When you start to exercise,

calories start counting up from 0.0 to 999.9 calories. You may also preset target calories

before training. Press MODE button to select CAL function and then press SET button to

preset target calories. Press RESET button to clear the target values of CALORIES to zero.

The preset target calories range is from 0.0 to 999.0 calories. Once you preset target

calories and then start to exercise, calories start counting down from preset target calories to

0.0. When the preset target calories count down to 0.0, calories will start to count up

immediately and the computer will begin beeping to remind you. (This data is a rough guide

for comparison of different exercise sessions and should not be used in medical treatment).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

LifeGear Advanced - Magnetic Upright Bike 20390 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info