669738
19
Zoom out
Zoom in
Vorherige Seite
1/21
Nächste Seite
38
39
Console Buttons
1. Start/On – If the console is in sleep mode, press and hold this button
for three seconds to turn the console on. Once the console is turned
on, press to start the console functions.
2. Enter/Mode – Press to switch between display readings (time, level,
calories, distance, and speed). Holding the Enter/Mode button will
initiate a scan mode that rotates between display readouts every
ve seconds. Press the button again to exit the scan mode.
3. Stop/Pause – Press to pause your workout. This will maintain your
current workout data. To reset the console and current workout data,
press and hold the Stop/Pause button for three seconds.
4. – Press to adjust your weight during setup mode or to change
the resistance level during a workout.
5. Bluetooth – Press to turn on Bluetooth to pair with a personal
computer.
Bike Desk Console Overview
2
1
5
3
4
NOTE: Not all personal computers have a Bluetooth module. A
Bluetooth adaptor can be purchased to work with your personal
computer.
Starting the Bike Desk
1. If the display window is blank, turn the console on by pressing and
holding the On button for three seconds.
2. The current user weight will be ashing in the display panel. Adjust
your weight to obtain more accurate calorie calculations.
3. Press the Start button to begin your workout. The time will start
counting up from 00:00.
4. Press the Up/Down buttons to adjust the resistance level.
Bike Desk Innovative Features
Bluetooth
The Workplace series consoles include a Bluetooth module
to support LifeSpan apps. All apps can be downloaded from the
LifeSpan Fitness Club. Apps show real time results for steps pedal
rotations, calories, distance, and time on your computer.
Charging Port (DT-3 Only)This port can be used to charge your wireless
mobile devices.
NOTE: You will not be able to save your workout data to a USB via
this port; it is used for charging purposes only.
Audible Safety Alert – The bike desk has an audible alert to notify the user
when the cycle desk is starting as well as when the resistance level is
being adjusted.
The alert may be distracting in an oce setting and can be turned o.
Please see the Personal Settings section (page 42) for instructions on how
to do so.
DT-3 Console shown here. DT-5/DT-7 Desks follow the same button layout.
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lifespan C3-DT3 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info