Bedienungsanleitung Line 6 Helix Rack (Seite 54 von 62) (Englisch)

693632

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Global Settings > Preferences

Knob Parameter Description

1 Snapshot Edits

Determineswhetherornotanyeditsmadetoasnapshot(blockon/o,parametercontrol,CommandCenter,tempo)arerememberedwhenreturningto

that snapshot. When set to "Recall," any snapshot edits are recalled when jumping from snapshot to snapshot, and appear as you last left them. When

set to "Discard," any snapshot edits are discarded when jumping from snapshot to snapshot, and appear as the preset was last saved. If you want to save

changes made to a snapshot while Snapshot Edits is set to "Discard,” press SAVE twice before selecting another. The camera icon on the home screen

shows you the Snapshot Edits setting at a glance—When set to "Recall," the camera is gray; when set to "Discard," the camera is red. At any time, hold

BYPASS and press SAVE to toggle this setting. Also see "Determining Snapshot Edit Behavior"

Tap Tempo

Pitch

DetermineshowdelayrepeatsbehavewhenrepeatedlypressingTAP."Accurate"respectsthenaturalpitchuctuationsinherentwhenchangingareal

delay pedal's time knob; "Transparent" minimizes these artifacts.

Preset Num-

bering

Determines whether each setlist's presets appear as 32 banks of four (A B C D) or are numbered 000-127 (convenient when recalling presets via MIDI

program change messages).

Global Settings > MIDI/Tempo

Knob Parameter Description

MIDI Base

Channel

Sets the system base MIDI channel that Helix uses for both receiving and sending MIDI communication via MIDI and USB. Note that MIDI messages as-

signed from the Command Center page can be set to any MIDI channel.

2 MIDI Thru

When on, MIDI OUT also acts as a MIDI THRU; that is, it passes through any MIDI messages received at the MIDI IN jack.

MIDI Over

USB

When on, Helix receives and transmits MIDI data via USB in the same capacity as its MIDI jacks.

MIDI PC

Send/Receive

DetermineswhetherornotHelixautomaticallysendsMIDIprogramchange(PC)messageswhenselectingpresets.ThissettingdoesnotaectanyMIDI

commands manually assigned from the Command Center page. Also determines whether or not Helix responds to program changes.

5 Tempo Select

The “Speed” or “Time” parameters of all tempo-based FX can be set to a note value that follows Tap Tempo or the tempo set with Knob 6 (Snapshot

BPM/Preset BPM/Global BPM). Choose whether the Helix tempo is stored and recalled with each snapshot, recalled with each preset, or is applied glob-

ally across all presets and snapshots.

Snapshot

BPM/Preset

BPM/Global

BPM

This is an alternative way to set the Helix tempo, as opposed to stepping repeatedly on the TAP footswitch. Depending on the Knob 5 (Tempo Select)

setting, this value is saved per snapshot, per preset, or globally. The Helix device's tempo has a resolution of 0.1 BPM (beats per minute). You can also

quicklyaccessthisparameteratanytimebybrieytouchingtheTAPfootswitch.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Line 6 Helix Rack Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Line 6 Helix Rack

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info