Bedienungsanleitung Line 6 Helix Rack (Seite 58 von 62) (Englisch)

693632

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

4. Set both tracks' outputs, as well as the DAW Master output,

to Helix USB 1/2 to allow all tracks to play back through Helix.

NOTE: Setting the stereo track's output to Helix USB 1/2 allows you to hear

your Helix-processed tone via the Helix hardware monitoring while record-

ing.Forthisconguration,disablesoftwaremonitoringonallDAWtracks.

5. Arm both these DAW audio tracks, hit the Record button and

start laying down your guitar performance!

Now you have your Helix-processed track to hear with the project, and a separate DI

track with which you can further experiment at any time with DAW plug-ins and/or re-

amping (see the next section).

Re-amping Through Helix

If your DAW software provides options for routing individual audio tracks to outputs

other than just the main Helix USB Out 1/2, then you can use these steps for re-amp-

ing a dry recorded DI track back through Helix.

1. In your DAW software, set the DI track's Output setting to a

Helix stereo USB Out other than USB Out 1/2. For this example

we'll use Helix USB Out 3/4.

2. Create a new stereo track in your DAW project and set this

track's Input and Output both to USB 1/2 - Let's name this

track "Re-amped." Arm the track for recording.

NOTE: In some DAW software it may be necessary to also activate the

software monitoring feature on this "re-amped" track to monitor the Helix-

processed signal when playing back your project. See your software's docu-

mentation.

3. On Helix, select the Input block and set it to receive from the

same USB stereo pair (USB In 3/4) and keep the Output block

set to "Multi." Load your choice of amps and eects on the

current Helix preset.

16B Dream Rig Duet

FeedbackTime

[37%]

Delay Harmony Delay

LevelMixKeyScale

0.0 dB40%MinorD1/8

DRY DI GUITAR

USB

RE-AMPED GUITAR

TRACK 1 (Dry DI Guitar)

(

Processed

uitar

)

TRACK 3 (Re-amped Guitar)

4. Now play your DAW project and you'll hear the DI track "re-

amped" through your Helix! Adjust the DI track's volume slider

to make sure the signal feeding into Helix is not too hot. Tweak

your Helix amp & eects as desired while listening with the

playback of your project mix.

5. Once you have your re-amplied guitar tone they way you like

it, Solo both the DI and re-amped tracks, rewind to the start of

the project and hit the DAW Record button, allowing it to cap-

ture the signal into the new re-amped track in real-time.

Allow the DI track to play to the end, stop recording and you've created your new re-

amped guitar track!

TIP: Note that you still have your original Guitar DI track, and you can repeat this

processtocreateadditionalre-ampedtrackswithdierentHelixsettings,add

plug-ins, blend with your original guitar track and more.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Line 6 Helix Rack Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Line 6 Helix Rack

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info