693630
115
Zoom out
Zoom in
Vorherige Seite
1/121
Nächste Seite
Appendix B: MIDI
B•3
POD HD500 - MIDI Control Reference
MIDI CC # Value Function
068 0-63 = Full 64-127 = Half Looper Full/Half Speed Switch
099 0-63 = Off 64-127 = On Looper Mode On/Off
Additional Controls
064 64-127 = Tap Tap Tempo - Enter Tap Tempo
069 0-63 = Off 64-127 = On Tuner Mode On/Off
Bank & Program Change Messages
POD HD500 will respond to incoming MIDI Bank & Program Change messages as follows.
• Load Set List: From your MIDI controller device, send a Bank Change CC0 (Bank
MSB),CC32(LSB)messagewithavalueof0(forSetlist1),1(forSetlist2),etc.,
followedbyaProgramChangemessage(Value0-63forPreset01A-16D)forthe
desired Preset within the Set List. The Set List and Preset are loaded on POD HD500.
• Load a Preset within the current Set List: Send a Program Change message (Value
0-63forPreset01A-16D)forthedesiredPresetwithinthecurrentSetList.
When using the POD HD500 hardware options for navigating Presets (the PRESETS
knob, 4-Way Nav. Disc, and footswitches A, B, C, D*) the device will automatically
transmit MIDI a Program Change message corresponding to the selected Preset. These
messages are transmitted to the MIDI OUT/THRU DIN. It is also possible to configure
Footswitches to send Bank and Program Change messages - see the next section.
*Note that you’ll need to set your “Footswitch Mode” Setup option to “ABCD” for this
specific Preset data to be sent when pressing the FS5 - FS8 footswitches to change the
Preset on POD HD500 see “Page1,Setup:UtilitiesOptions”onpage2•2.
This feature allows you to use POD HD500 to control external devices by sending the
following MIDI Bank & Program Change commands. Also note that if you connect to
another Line 6 POD HD500 or POD HD Pro, the connected device will respond to the
Setlist & Preset loading behavior of the initial POD HD500!
115

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Line 6 Pod HD500 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Line 6 Pod HD500

Line 6 Pod HD500 Kurzanleitung - Holländisch - 18 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info