727826
74
Zoom out
Zoom in
Vorherige Seite
1/77
Nächste Seite
70
Maintenance
Linksys
Firmware Upgrade
Users may directly upgrade the device firmware on the Firmware Upgrade
page. First download the firmware file from Linksys.com. Go to Maintenance >
Firmware Upgrade. Please confirm all information about the software version
in advance. Select and browse the software file, click Firmware Upgrade button
to complete the upgrade of the designated file.
NOTE
1. When choosing previous firmware versions, all settings will be restored
back to default.
2. Upgrading firmware may take a few minutes, so please don’t turn off the
power or press the reset button.
3. Please don’t close the window or disconnect the link during the upgrade
process.
Restart
Go to Maintenance > Restart.
Click Restart Router to reboot the router, and then click OK to continue or click
Cancel to abandon.
Backup and Restore
Go to Maintenance > Backup and Restore page. You can export the current
configuration or restore existing backup settings here. You can back up two
kinds of configuration files: the startup and the mirror configuration. The router
will load the startup configuration file when it boots up, and copy the startup
file to the mirror configuration. If the startup configuration file fails, the mirror
configuration file will be adopted.
NOTE If the router operates for 24 hours without reboot or configuration
changed, the startup configuration will be copied to mirror configuration
automatically.
Restore Startup Configuration
You can import an existing configuration file (.config) to the router. Click
Browse in the Restore Startup Configuration section and find the file, and then
click Restore to import the configuration.
Backup Configuration File
You can export your startup and mirror configuration files to your computer.
If needed, you can use these files to restore the settings. Click Backup Startup
Configuration or Backup Mirror Configuration. The default filenames will be
Startup.config or Mirror.config. You can change the filenames if you wish.
Copy Configuration File
You can copy your startup configuration file to your mirror configuration file or
copy mirror to your startup configuration manually.
NOTE
Make a current configuration file before doing this action so that you
can return to the current configuration if not satisfied with the startup or
mirror configuration file.
74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Linksys LRT224 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info