Bedienungsanleitung Livarno IAN 366981 (Seite 4 von 14) (Deutsch, Englisch, Holländisch, Dänisch, Französisch)

785738

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Congratulations!

You have chosen to purchase a high-quality

product. Familiarise yourself with the product

before using it for the first time.

Read the following assembly

instructions and the safety

information carefully.

Use the product only as described and only

for the given areas of application. Store these

assembly instructions carefully. When passing

the product on to third parties, please also hand

over all accompanying documents.

Scope of delivery (Figure A)

1 x wardrobe, unassembled (A - F)

1 x drawer compartment (G - H)

1 x assembly instructions

Technical data

Dimensions: approx. 43 x 95 x 28cm (W x H x D)

Material: 100 % polypropylene

Maximum load per storage

compartment: 2kg

Date of manufacture (month/year):

04/2021

Correct use

The product is not designed for commercial use.

The product is designed for indoor use.

Safety notes

Risk to life!

• Never allow children to play with the packag-

ing material unsupervised. There is a risk of

suﬀocation.

Risk of injury!

• Ensure correct stability before using the

product.

• Place the product on a level surface.

• The product may only be used under adult

supervision and may not be used as a toy.

• Check the product for damage or wear before

each use. The product may be used only

when in good working order and condition!

• Make sure that the product is assembled

correctly and in accordance with these

assembly instructions. If assembly is not

performed correctly this can lead to injuries

and may also compromise safety and

function.

• Please ensure that the wall is suitable for wall

mounting of the product. Unsuitable underly-

ing wall surfaces can lead to injury.

Assembly

Important: The assembly of the product

should be undertaken by at least two

persons.

You will need the following tools for the assem-

bly of the product, not included in the scope

of delivery: Phillips head screwdriver and a

suitable drill.

1. Assemble the product on a level surface, as

shown in ﬁgures B - C.

Note: Make sure that the rod (C) with the hole

is in top level. It will be used later for attachment

to the wall.

2. Slide the drawer compartment into the

product, as shown in ﬁg. D.

3. The product must be assembled on the wall

for optimum stability (ﬁgure E).

Note: Ask your specialist retailer about the

assembly material to use (dowels and screws)

with your masonry.

Storage, cleaning

When not in use, always store the product clean

and dry at room temperature. Clean only with

water and wipe dry afterwards with a cloth.

IMPORTANT! Never clean the product with

harsh cleaning agents.

Disposal

Dispose of the article and the packaging materi-

als in accordance with current local regulations.

Packaging materials such as foil bags are not

suitable to be given to children. Keep the pack-

aging materials out of the reach of children.

GB/IE/NI

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Livarno IAN 366981 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info