Zoom out
Zoom in
Vorherige Seite
1/71
Nächste Seite
233–33147.021
3 3 1 4 7 0 2 1
Operating Manual
Peripherals
Viewvision DR
+
DVB-T
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Forum

Suche zurücksetzen

  • Wie hinterlege ich die Kanäle (Autoprogrammierung) nach Umstellung auf digital. Es werden keine Sender gefunden. Eingereicht am 1-12-2018 17:51

    Antworten Frage melden
  • Wie hinterlege ich die Autoprogrammierung nach Umstellung auf digital.
    Eingereicht am 1-12-2018 17:45

    Antworten Frage melden

Inhalt der Seiten


  • Page 1

    Operating Manual
    Peripherals

    3 3 1 4 7 0 2 1

    233–33147.021

    – Viewvision DR+ DVB-T



  • Page 2

    Brief instructions for ViewVision DR+DVB-T
    Preparation

    Recorder/TV operation

    Remote control TV mode

    Channel overview

    Remote control recorder mode

    or P+/-

    Select channel

    Switch unit on/off
    Insert disk

    3456

    Button on the unit

    – Insert disk –

    Operating modes

    Programme magazine
    Picture-in-picture during playback

    MOVIE


    – 34MOVIE –
    56HDD/DISC/USB –

    MUSIC


    – 34MUSIC –
    56HDD/DISC/USB –

    Insert disk

    PHOTO


    – 34PHOTO –
    56HDD/DISC/USB –

    Select recording medium


    Recording
    – Insert recordable disk –
    HDD/
    DVD

    or
    – 34TV –
    56TV HDD/TV DVD

    Disk menu

    Select signal source

    Select title 3456–

    Start recording manually

    Playback

    Stop recording manually

    Playback

    Programme timed recording

    Pause

    ShowView

    Stop

    Timer overview

    Forwards (press several times)

    Terminate menu

    Backwards (press several times)

    Recording of Loewe SAT-TV

    Next/previous section

    P+/-

    Volume

    V+/-

    Individual frame
    Slow motion

    or P+/-

    – Enter data –
    – Enter data –





    See operating instructions for Loewe TV

    3/4
    /

    (press several times)

    Jump forwards/backwards 5 mins. 3/4 (only hard disk drive HDD)
    Detailed information
    Title menu
    -

    Please fold out this page.



  • Page 3

    Remote control Assist – recorder operation

    Loewe TV: Sound off/on
    LED indicator for current operating mode
    Switch over to operate TV set
    (Page 20)........................ Switch over to operate Recorder
    Timer recording menu; timer recording list menu
    (Page 49) . ...............................................Timeshift Mode

    Switch on/off - on stand by................................(Page 20)

    Loewe TV: Radio Digital; long: Auro Radio
    Switch over to operate DVD-Player
    Loewe TV: Sound settings

    STOP: Select station directly...............................(Page 35)
    MENU: enter numbers

    (Page 36)................................ TV: EPG; PLAY: skip 15 Sec.
    (Page 40).............................User interface of loaded DVD
    MENU: Title List / original and playlist
    (Page 23).................................................... “Setup” menu
    Loewe TV: Volume

    STOP: Call AV selection......................................(Page 50)
    MENU: enter numbers
    PIP (picture in picture).......................................(Page 41)
    “Home” menu....................................................(Page 23)
    Info; PLAY: menu bar.........................................(Page 35)
    MENU: hide menu
    PLAY: Next chapter............................................(Page 38)
    STOP: Select station up/down............................(Page 35)
    MENU: select/set...............................................(Page 23)

    (Page 35)............... TV station list/Status display (TV, DVD)
    MENU: confirm the menu selection

    (Page 51)................................................ ShowView menu
    (Page 55).......................................... New chapter marker

    Zoom.................................................................(Page 39)
    short: Set marker; long: Marker search..............(Page 39)

    (Page 39).........................PAUSE: short: slow motion back
    (Page 38)...................................... PLAY: search backward
    (Page 50)............................................................... Record

    Playback............................................................(Page 38)
    PAUSE: slow motion forward.............................(Page 39)
    PLAY: search forward.........................................(Page 38)

    (Page 38, 39)......................................Pause; single frame

    Stop...................................................................(Page 38)
    -



  • Page 4

    Index
    A
    Area Code 31
    AUDIO OUT 7
    Auto Chapter 32
    Automatic programming 24
    B
    Basic Settings 20
    Brief instructions 2
    C
    Card-Reader 47
    Chapter List 54
    Clock set 27
    COMPONENT VIDEO OUT 7
    Connections
    Accessories 19
    Aerial 16
    Amplifier 19
    Camcorder 20
    Decoder 18
    General 16
    Satellite Receiver 18
    Set-top box 18
    Television 16
    Copy/move files/folders 44
    Copy protection system 14
    Copyright 14
    CPRM 14
    D
    Delete Station 26
    Digital Link 11,20
    Digital Link Plus 11,24
    DIGITAL OUT 7
    Digital Video 52,53
    Disc-related Terms 15
    Disc Format 33
    Disc playback 36
    Disc Protect 34
    Display 7
    Disposal 11
    DivX registration code 31
    Dolby Digital 29
    DTS 29
    Dubbing 62
    Dub from DVD to HDD 63
    Dub from HDD to DVD 63
    DV IN 6
    -

    E
    Edit recordings 54
    Add chapter markers 55
    Combine chapters 60
    Combine titles 59
    Create new Playlist 55
    Delete part 57
    Divide title 60
    Edit thumbnail 55
    Move Playlists Chapters 61
    Protect title 61
    Sorting 59
    Title Name 58
    EPG program guide 36
    F
    Front Panel 6
    G
    Glossary 71
    H
    Harddisc 11
    HDD 11,15
    HDMI 7,37
    I
    Initialisation 28
    Inserting/removing memory
    cards 47
    L
    Lock System 30
    M
    Main menu 21
    Mains cable 7
    Masthead 67
    Moving stations 26
    MPEG 29
    O
    Operating additional devices
    8
    OPTICAL 7

    P
    Photo mode 46
    Picture in Picture (PIP) 41
    Play-Back Control 34
    Playable Discs 14
    Playback
    Audio CD 43
    Compatibility 44
    MP3/WMA media 43
    Program list 45
    Random play 44
    Playiback
    DivX files 42
    Playing on other devices 64
    Playlist 55
    Progressive Scan 16
    R
    Rating 30
    Rear Panel 7
    Recording 49
    Clip recording 49
    Delayed TV viewing 49
    Digital Video 52
    Manual Record 50
    Record from external
    sources 52
    ShowView 51
    Simultaneous record and
    display 50
    Timer Recording 51
    Timer Record List 52
    Timeshift mode 49
    Regional code 15
    Remote Control 16
    Remote control 3,9,48
    Resetting 20
    Rewritable discs 13

    S
    S-VIDEO OUT 7
    Safety 12
    Scope of delivery 10
    Service 70
    Set Password 29
    Delete 30
    Switching off 30
    Set up 10
    Setup menu 23
    Audio Menu 29
    Disc Menu 33
    General Menu 24
    Language Menu 28
    Lock Menu 29
    Recording Menu 32
    Slide Show 46
    Symbols 15
    T
    Technical Specifications 67
    Technische Daten 67
    Title List 54
    Trademark rights 10
    Troubleshooting 65–66
    TV Operation 35
    U
    USB mode 47



  • Page 5

    Contents
    Brief instructions for ViewVision DR+DVB-T.................... 2
    Remote control Assist – recorder operation..................... 3
    Index................................................................................. 4
    Front Panel....................................................................... 6
    Rear Panel & Display........................................................ 7
    Operating additional devices............................................8
    Setting the remote control.............................................................................8
    Operating Loewe equipment..........................................................................8
    Remote control Assist – TV-operation.............................. 9
    Welcome.........................................................................10
    Scope of delivery..........................................................................................10
    Set up..........................................................................................................10
    Shipping the Unit......................................................................................... 11
    Disposal....................................................................................................... 11
    Advantages of connection to a Loewe TV set............................................... 11
    About the internal harddisc.......................................................................... 11
    For your safety............................................................... 12
    Essential Information..................................................... 13
    Rewritable discs...........................................................................................13
    Playable Discs..............................................................................................14
    Notes on Discs.............................................................................................15
    Disc-related Terms........................................................................................15
    Symbols.......................................................................................................15
    Initial Installation........................................................... 16
    Initial Remote Control Setup .......................................................................16
    Switching over to Progressive Scan..............................................................16
    Connections - General..................................................................................16
    Connecting to the Aerial..............................................................................16
    Connecting to the Television........................................................................16
    Alternative connections................................................................................16
    Connecting to a Loewe TV System................................................................17
    Connecting to a set-top box / Satellite Receiver...........................................18
    Connecting to an External Decoder Box.......................................................18
    Connecting to an Amplifier..........................................................................19
    Connecting Audio/Video (A/V) Accessories...................................................19
    Connect to the mains...................................................................................20
    Basic Settings..............................................................................................20
    Concealed installation..................................................................................20
    Resetting the DVD Recorder.........................................................................20
    Auto Setup................................................................................................... 21
    Menu overview............................................................................................22
    Main menu (HOME).....................................................................................23
    Setup menu.................................................................................................23
    The General Menu........................................................................................24
    Language Menu...........................................................................................28
    Audio Menu.................................................................................................29
    Lock Menu...................................................................................................29
    Recording Menu..........................................................................................32
    Disc Menu...................................................................................................33
    Operating convenience................................................... 35
    TV mode......................................................................................................35
    Selecting a station.......................................................................................35

    EPG program guide......................................................................................36
    Disc playback...............................................................................................36
    HDMI mode..................................................................... 37
    Video mode.....................................................................38
    Playing back a DVD or video CD...................................................................38
    Playing memory media with mixed contents................................................ 41
    PIP (Picture In Picture)................................................................................. 41
    DivX mode...................................................................... 42
    Audio mode.................................................................... 43
    Copy/move files/folders................................................................................44
    Program list.................................................................................................45
    Photo mode.................................................................... 46
    USB mode....................................................................... 47
    Recording....................................................................... 49
    Recordings on the HDD................................................................................49
    Delayed TV viewing – Timeshift mode..........................................................49
    Simultaneous record and display..................................................................50
    Manual Record............................................................................................50
    Timer Recording........................................................................................... 51
    Timer recordings with the ShowView® system............................................. 51
    Timer Record List..........................................................................................52
    Record from external sources.......................................................................52
    Digital Video................................................................................................53
    Edit recordings............................................................... 54
    Menu Title List and Chapter List...................................................................54
    Edit Original and Playlist..............................................................................55
    Add chapter markers....................................................................................55
    Create new Playlist.......................................................................................55
    Add title/chapter to the Playlist....................................................................56
    Delete title/chapter from Original/Playlist.....................................................57
    Delete part...................................................................................................57
    Title Name...................................................................................................58
    Select title start point...................................................................................58
    Select chapter..............................................................................................58
    Sorting.........................................................................................................59
    Combine titles..............................................................................................59
    Divide title...................................................................................................60
    Combine chapters........................................................................................60
    DVD additional functions.............................................................................60
    Move Playlists Chapters............................................................................... 61
    Hide title/chapter......................................................................................... 61
    Protect title.................................................................................................. 61
    Dubbing.......................................................................... 62
    Dub from HDD to DVD.................................................................................63
    Dub from DVD to HDD.................................................................................63
    Overwrite recordings....................................................................................64
    Title List menus on other devices..................................................................64
    Playing on other devices..............................................................................64
    Troubleshooting.............................................................. 65
    Technical Specifications.................................................. 67
    Masthead....................................................................................................67
    Language Code List........................................................68
    List of country codes...................................................... 69
    Service............................................................................70
    Glossary.......................................................................... 71

    -



  • Page 6

    Front Panel

    Operating
    indicator

    Front flap
    (closed)

    Disc tray

    Power button
    Switch off in standby

    Playback
    / Pause

    open/close

    Stop

    Next/previous
    RES
    (screen chapter
    resolution)

    Start
    recording

    V I D E O

    Disc tray

    -

    USB

    DV IN

    AV3 Video IN
    AUDIO IN L/R

    Display

    D I G I T A L

    Front flap
    (open)

    Recording
    media



  • Page 7

    Rear Panel & Display

    DIGITAL AUDIO COMPONENT VIDEO
    Digital,
    coaxial OUT (Y Pb Pr)
    Aerial connection
    Connection for a TV
    audio output
    with component inputs
    (Cinch)
    IN (from ANT.)

    AV 2 DECODER
    Euro AV2 (SCART) connection for an
    external source (Decoder, Set-TopBox, Video Recorder etc.).

    S-VIDEO OUT AUDIO (L/R)
    Connection for a Connection for a TV with
    TV with S-Video audio inputs (Cinch)
    input.

    OUT (to TV) OPTICAL
    Passes the
    Digital, optical
    aerial signal audio output
    to the TV

    HDMI OUT
    connection of a TV
    with HDMI input

    AV 1
    Euro AV1 (SCART)
    connection for TV set

    Mains cable

    Caution: Do not touch the inner pins of connection sockets on the rear panel. Electrostatic discharge may cause permanent damage to the unit.

    Timeshift Symbol
    Display for active Timeshift
    operation

    Media symbol
    Display for selected
    recording medium

    T/S

    Record symbol
    Display for currently
    running recording

    REC

    HDD DVD

    Timer symbol
    Display for programmed
    timer recording(s)

    Character specifications
    time, total playing time, time elapsed, title, chapter /
    track number, station, status etc.
    -



  • Page 8

    Operating additional devices
    Setting the remote control

    Operating Loewe equipment

    The different Loewe sets can be set as follows on the Assist remote control:
    Using the remote control for a DVD player



    Device



    Loewe TV (Q2500 – L2650)

    +





    Loewe TV (Q2300 – Q2400)

    +





    Loewe Centros 11x2

    +



    Loewe Viewvision, Centros 21x2

    +



    Loewe ViewVision DR+ DVB-T

    +



    Loewe ViewVision 8106 H

    +



    Loewe Auro 2216 PS/8116 DT

    +



    Loewe Xemix 6222 PS

    +



    Button combination


    Press the DVD button, the indicator above
    it lights for about 5 seconds.
    Using the remote control for a recorder









     Factory setting

    Press the REC button, the indicator above
    it lights for about 5 seconds.
    Using the remote control for a TV set
    Press the TV button, the indicator above
    it lights for about 5 seconds.

    The specified key combination must be pressed (approx. 5 s) until one of the LEDs
    flashes twice.

    -

    Every time you press the button, the indicator of the selected operating mode (TV
    – REC – DVD – RADIO) lights up.



  • Page 9

    Remote control Assist – TV-operation
    Sound off/on
    LED indicator for current operating mode
    Switch over to operate TV set
    Switch over to operate Recorder
    Call timer list
    Set picture format

    Switch on/off - on stand by

    Radio Digital on/off
    Switch over to operate Auro
    Sound menu on/off

    Select station directly
    MENU: enter numbers or letters

    Call AV selection

    Teletext on/off
    Show/hide menu

    PIP on/off (picture in picture)
    Menu “ASSIST+“ on/off
    Open index; MENU: info texts on/off
    Status display on/off; MENU: hide menu

    Volume down/up

    Select station up/down

    Electronic Programme Guide (EPG) on/off

    Station list on; MENU: confirm/call

    Teletext subtitles
    Freeze picture; DR+: Call the DR+ archive
    Select station down; DR+: Jump back/Rewind/Replay

    PIP: Position of the PIP picture; MENU: select/set
    56 Move picture vertically;
    34 Rotate TV

    Yellow button: previous station
    Blue button: programme info on/off
    Freeze picture off; DR+: Playback/Set bookmark
    Select station up; DR+: Jump forward/Fast forward

    DR+: Record
    Freeze picture on/off;
    DR+: Pause (Start viewing with time shift)

    Freeze picture on; DR+: Stop

    -



  • Page 10

    Welcome
    Thank you
    for choosing a Loewe product. We are happy to welcome you as our customer.
    At Loewe we combine the highest standards of technology, design and user friendliness. This is equally true of TV, DVD, video, audio and accessories.
    Neither technology nor design is an end in itself, but both are intended to provide
    our customers with the best possible audio and visual experience. Our design is
    not influenced by short-term, fashionable trends. You have, after all, purchased a
    high-quality piece of equipment which you do not want to get tired of looking at
    tomorrow or the day after.
    The set is equipped for digital reception. You can use the digital TV (DVB T) which
    is already being widely broadcast.
    You can control three devices with the Assist remote control. In addition to this
    recorder also a Loewe TV set and a Loewe DVD player or a Loewe Audio System
    (page 8).

    Scope of delivery








    recorder Loewe ViewVision DR+ DVB-T
    Assist remote control with 2 batteries
    Euro AV cable (Scart cable)
    Antenna cable
    HDMI cable
    1x DVD-RW disc
    this operating manual

    Trademark rights
    Manufactured under license from Dolby Laboratories. Dolby, ProLogic and the
    double-D symbol are trademarks of Dolby Laboratories.
    “DTS“ and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
    ShowView is a registered trademark of Gemstar Development Corporation.
    The ShowView System is manufactured under license from Gemstar Development
    Corporation.
    HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or
    registered trademarks of HDMI licensing LLC.

    Set up
    • Place the recorder on a firm, level base.
    • Do not move the recorder during operation or just after switching it off.
    • Do not place the recorder in the vicinity of sources of intense heat or in direct
    sunlight.
    • When installing in a cabinet or enclosed shelf: Leave at least 2.5 cm free around
    the recorder to allow unhindered circulation of air and avoid build-up of heat.
    Do not cover up fan and openings on the rear.
    • There can be interference to the images and sound of any nearby television,
    video recorder or radio. If this is the case, do not position the unit in the direct
    vicinity of a TV set, video recorder or radio, or switch the unit off after removing the disc.
    • Position the recorder so that the infrared signal of the remote control can
    reach the display of the recorder unobstructed (or if this is not possible, see
    “Advantages of connection to a Loewe TV set”, page 11).
    • Do not place strong artificial light sources in front of the device. This may affect
    infrared reception.
    • Incorrect voltages can damage the device. This device may only be connected
    to a power supply with the voltage and frequency specified on the rating plate,
    using the power cable provided.
    • If there is an electrical storm, disconnect the antenna and mains plug. Power
    surges caused by lightning strikes can damage the unit through the antenna
    system or the mains.
    • The antenna and mains should also be disconnected if the unit is to remain
    unsupervised for a long period of time.
    • The mains plug must be easily accessible so that the unit can be disconnected
    at any time.
    • Lay the cable in such a way that it cannot get damaged. The power cable should
    not be kinked or laid over sharp edges, not stood upon or exposed to chemicals
    - the latter also applies to the device as a whole. A mains cable with damaged
    insulation can cause electric shocks and is a fire hazard.
    • Do not tug the cable when you remove the mains plug but hold the plug by the
    housing. The wires in the mains plug may be damaged and cause a short-circuit
    when you plug it back in.
    You should also read and follow the safety advice on the following pages.

    - 10



  • Page 11

    Welcome
    Shipping the Unit

    Advantages of connection to a Loewe TV set

    The original shipping box and packaging materials should be used to ship the unit.
    To give the unit the best possible protection, repack it as it was originally packed
    by the manufacturer.

    With Digital Link you can install the recorder for example in a closed rack or a
    cupboard without direct visual contact with the recorder. With the DVD remote
    control, you operate the recorder via the Loewe TV set. Digital Link must be
    switched on on the recorder (page 20).
    If you use the HDMI connection, the TV set is automatically switched over to this
    input if your TV set supports this function.
    If you want to make timer recordings from the TV satellite tuner, Digital Link Plus
    controls the recording. With Digital Link Plus the station data of the aerial and
    cable stations of the TV set are transferred to the recorder so that the same stations
    are saved in the same order in both devices. This enables timer recordings of aerial
    and cable stations to be made comfortably on the TV set with the EPG (Electronic
    Program Guide). The timer data are transferred to the recorder which then makes
    the timer recording independently of the TV set. For timer data for satellite stations, the TV set starts and stops the recorder and sets it to the Euro AV 1 input.
    When play is started, this is shown immediately on the TV set regardless of which
    TV station you are currently watching (if the TV is switched off, it will be switched
    back on automatically first).

    Disposal
    Cardboard box and packaging
    In line with national regulations regarding the disposal of packaging materials, we
    pay a fee to authorised recyclers who collect packaging from dealers. However, we
    recommend that you keep the original cardboard box and the rest of the packaging
    materials so that the unit can, if necessary, be transported in the safest possible
    conditions.
    The unit
    Important: The EU Directive 2002/96/EG governs the proper
    re-acceptance, handling and recycling of used electronic appliances. Old electronic appliances must therefore be disposed of
    separately. Never throw this set in the normal domestic waste.
    You can hand in your old set free of charge at identified collection
    points or at your dealer if you buy a similar new set. Other details
    about re-acceptance (also for non-EU countries) are available from
    your local administration.
    Remote control batteries
    The batteries provided contain no harmful materials such as
    cadmium, lead or mercury. Regulations concerning used batteries
    mean that batteries may no longer be thrown out with the household rubbish. You can dispose of used batteries free of charge at
    the collection points in commercial outlets. Your dealer will also
    have a collection point for used batteries.

    About the internal harddisc
    The internal harddisc (HDD) is very sensitive. Operate the recorder according to the
    following regulations to avoid HDD errors.
    Important recordings should be saved on DVDs to avoid losing data (page 62).
    Do not move the recorder immediately after switching it off. To move the recorder,
    proceed as follows:
    1. Wait at least two minutes after the message POWER OFF.
    . Pull out the mains plug.
    . Move the recorder.
    Data on the HDD may be lost if the power fails during recorder operation.
    The HDD is very sensitive. Improper handling or an unsuitable environment could
    damage the HDD after a few years in operation.
    Sudden stopping during playing and visible mosaic effects in the picture are an
    indication of this. There may be no advance warning signs for an HDD defect.
    Recordings cannot be played if the HDD is defective. The HDD must be replaced
    in this case.

    11 -



  • Page 12

    For your safety
    For your own safety and to avoid unnecessary damage to your unit, please read
    and follow the safety advice below:
    Use for the intended purpose and ambient conditions
    This recorder is intended exclusively for the reception, recording and playing of
    video and audio signals and is designed for the home and office and may not be
    operated in rooms with a high humidity (e.g. bathroom, sauna) or high concentration of dust (e.g. workshops).
    The terms of the warranty only cover normal use of the recorder.
    If the device is used outdoors, make sure that it is protected against moisture (rain,
    drips and splashes or dew). High humidity and dust concentrations lead to leak
    currents in the device which may lead to electric shocks or fires.
    If you have moved the device out of the cold into a warm environment, leave it
    switched off for about an hour to avoid formation of condensation.
    Always switch off your system (ViewVision DR+ DVB-T, TV set and any other audio
    components which may be connected) before connecting or disconnecting other
    devices or loudspeakers.

    PLEASE NOTE: TO AVOID RISK OF ELECTRICAL SHOCK, DO NOT REMOVE THE
    COVER (OR THE REAR OF THE UNIT). THERE ARE NO PARTS INSIDE THE UNIT
    THAT CAN BE REPAIRED BY THE USER. REPAIRS SHOULD ONLY BE CARRIED
    OUT BY A LOEWE DEALER.
    Only use original accessories such as Loewe installation systems if possible.
    Supervision
    Do not allow children to use the recorder/TV set unsupervised. Do not allow children to
    play in the immediate vicinity of the recorder/TV set. They could knock, push or pull the
    equipment over and cause injury.
    Cleaning
    Only clean your recorder with a slightly damp, soft, clean cloth (without any aggressive cleaning agents).
    If the recorder does not read a disc correctly, the reading unit in the device may be
    soiled. Use a commercially available cleaning disc.
    Keep the disc drawer closed to prevent dust from the drawer getting onto the
    lens.
    About this user guide
    The information in this guide refers to the Loewe product Viewvision DR+ DVB-T
    and Viewvision DR+ DVB-T Secam - (version for France).
    Unless stated otherwise, the instructions refer to the operating elements on the
    Assist remote control.

    Do not open up the housing, or you could be directly exposed to the laser beam.
    The laser beam will be visible if the unit is open.
    DO NOT LOOK INTO THE LASER BEAM.
    Protect your recorder from:
    • liquids and damp
    • shock and mechanical stress
    • magnetic and electrical fields
    • cold, heat, direct sunlight and extreme fluctuations in temperature
    • dust
    • anything which obstructs ventilation
    • manual interference with the unit‘s interior

    - 12

    The explanations for DVDs in this guide refer to the DVDs recorded with this
    recorder. They do not apply for DVDs recorded on other recorders and played on
    this recorder.
    Paragraphs beginning with the ➠ symbol indicate important hints, tips or conditions for perfect operation.
    Terms which you will find in the menu or printed on the recorder are printed in
    bold type.
    In the functional descriptions, the necessary operating elements are arranged to
    the left of the text which contains the handling instructions.
    Please read this operating manual to understand this device and its possibilities.
    The individual chapters are inter-related.
    The index/glossary at the end of this manual explains certain terms which are used
    in the user interface of the device and in the operating manual.



  • Page 13

    Essential Information
    Rewritable discs
    DVD-RW (Digital Versatile Disc - ReWritable)
    DVD-RW discs can be formatted for recording in the VR mode or
    in the video mode. These discs can be rewritten several times.
    Recordings can be deleted and the disc can then be rewritten.

    VR mode Recordings can be extensively edited.
    They can only be played on VR mode compatible players (after
    finalisation).
    Video mode Limited editing possible.
    Play on normal DVD players (after finalisation).
    DVD-R (Digital Versatile Disc - Recordable)
    These discs can be recorded once. A DVD-R disc cannot be rewritten or edited after finalisation. DVD-R discs can only be formatted
    for recording in video mode. Play on normal DVD players (after
    finalisation). Limited editing possible.
    DVD+RW (Digital Versatile Disc + ReWritable)
    These discs can be rewritten several times. Recordings can be deleted and the disc can then be rewritten. Play only on DVD+RWcompatible players (automatic finalisation). Edited contents can
    only be played after finalisation on DVD+RW-compatible players.
    Titles/chapters of recordings can be edited.
    DVD+R (Digital Versatile Disc + Recordable)

    ➠ This recorder cannot write to CD-R or CD-RW discs.
    ➠ This recorder cannot write data discs (e.g. no MP3 or JPEG files).
    ➠ The displayed recording time is not exact because the recorder uses a variable bit rate video compression. This means that the exact recording time
    depends on the contents being recorded.

    ➠ When recording a television broadcast the remaining recording time may be
    shorter if the reception is poor or the picture contains interference.

    ➠ If you record only still pictures or audio, the recording time may be longer.
    ➠ The displayed recording time and remaining time may not always add up to
    the total length of the disc.

    ➠The available recording time may be shorter following intensive editing of the
    disc.

    ➠ If you use a DVD-R disc you can continue recording until the disc is full or
    until you finalize it. Before you start recording check how much recording
    time is available on the disc.

    ➠ If you use a DVD-RW disc in video mode, the available recording time is
    extended again when you delete the last title recorded on the disc.

    ➠ The Delete Parts function (page 57) only hides the title but does not delete
    it from the disc and does not extend the recording time (except for the last
    recorded title on a DVD-RW disc in video mode).

    ➠ Overwrite recording is only possible on DVD+RW discs (Page 64).

    These discs can be recorded once. A DVD+R disc cannot be rewritten or edited after finalisation. Play only on DVD+R-compatible
    players (after finalisation). Edited contents can only be played
    after finalisation on DVD+R-compatible players. Title/chapters
    can be edited conditionally.

    13 -



  • Page 14

    Essential Information
    Recording TV-Audio Channels
    This recorder can also record NICAM audio. If the NICAM setting (page 26) is set
    to “Auto“, NICAM audio will be recorded in the case of a NICAM transmission.
    Restrictions on Video Recording
    • You cannot record movie material with copy protection with this recorder. If
    a copy protection is encountered during recording, the recording stops or is
    interrupted automatically and a message is displayed on the screen.
    • A video that can only be copied once can only be recorded using a DVD-RW
    disc in VR mode with CPRM (see below).
    • NTSC format signals from analog or DV inputs cannot be recorded correctly
    with this recorder.
    • SECAM format video signals (from an integrated TV tuner or from analog
    inputs) are recorded in PAL format.
    CPRM
    CPRM is a copy protection system (with scramble system) that only allows the
    recording of “copy once“ broadcasts. CPRM is the abbreviation for “Content
    Protection for Recordable Media”.
    This recorder is CPRM compatible. You can therefore record copy-once broadcasts
    but cannot make copies of these recordings. CPRM recordings are only possible
    with VR mode formatted DVD-RW discs and can only be played on players with
    CPRM compatibility.
    Copyright
    • The recording equipment should only be used for lawful copying. You should
    find out what constitutes lawful copying in the country in which you are making a copy. Copying of copyrighted material e.g. films or music is only lawful
    if permitted by a legal exception or consented to by the rights owner.
    • The product contains copyright protection technology through certain US patents and other intellectual property rights and is the property of the Macrovision
    Corporation and other companies. Use of this protection technology must be
    authorized by the Macrovision Corporation. It is only intended for private or
    other limited use unless otherwise authorized by the Macrovision Corporation.
    Reverse engineering and disassembly are prohibited.

    Playable Discs
    Video-DVD (8 cm- / 12 cm disc)

    Video-CD (VCD, SVCD, 8 cm- / 12 cm disc)

    Audio-CD
    (8 cm- / 12 cm disc)

    DIGITAL AUDIO
    Recordable
    ReWritable

    CD-R/RW

    DVD-R/DVD-RW discs, DVD+R/DVD+RW discs, CDR/CD-RW discs with audio titles,
    DivX, MP3/WMA or JPEG files, VCD/SVCD and Kodak Picture-CDs (JPEG) can also
    be played on this unit.
     including MP3 discs with ID3-Tag.

    ➠ DVD-R/RW, DVD+R/RW and CD-R/RW discs written to using a PC or a DVD
    or CD recorder cannot be played if the disc is damaged or dirty or if there is
    condensation on the recorder‘s lens.

    ➠ If you record a disc using a PC, even if it is in a compatible format, the disc
    may not play depending on the settings of the application software used to
    create the disc. (Further information can be obtained from the software provider).

    ➠ Depending on the recording unit or the CD-R/RW (or DVD±R/±RW) disc itself,
    some CD-R/RW (or DVD±R/±RW) discs cannot be played with this unit.

    ➠ Do not attach any labels to either side (the labeled side or the written side)
    of a disc.

    ➠ Do not use any irregularly shaped CDs (e.g. heart-shaped or octagonal). If
    you use these discs malfunctions may occur.

    ➠ Fingerprints and scratches on the disc can affect playback and/or recording.
    Take proper care of your discs.

    - 14



  • Page 15

    Essential Information
    Regional code of the Recorder and DVDs
    This Recorder can only play Region “2“ or “all“ coded DVDs.

    2

    The region code on the label of some DVDs shows which type of DVD recorder can
    play those discs. If you play other discs the error message “Incorrect region code.
    Playback not possible.“ will be displayed on the TV screen.
    Some discs may not have the label with the region code even though they cannot
    be played in all regions.

    Notes on Discs
    Handling Discs
    Do not touch the prerecorded side of the disc. Hold the disc at the edges so as
    not to touch the surface with your fingers. Do not stick paper or tape to either
    side of the disc.

    Disc-related Terms
    Title
    A title is the main movie content or the music album. You have easy access by
    the title number.
    Chapter (DVD)
    Chapters are movie sequences or a piece of music which are parts of a title. You
    have easy access by the assigned chapter number.
    Track (only Video-CD or Audio-CD)
    Movie sequences or a piece of music on a Video-CD or an Audio-CD. You have
    easy access by the assigned track number.
    Scene
    On a Video-CD with PBC functions (Playback Control) the moving pictures and
    freeze frames are divided into sections called “scenes”. You have easy access by
    the assigned scene number.

    Symbols
    Storing Discs
    After playing, store the disc in its case. Do not expose the disc to direct sunlight
    or a source of heat and never leave it in a parked car exposed to direct sunlight as
    there may be a considerable increase in temperature inside the car.
    Cleaning Discs
    Fingerprints and dust on the disc can affect the picture and sound quality. Clean
    the disc before playing it with a clean cloth. Wipe the disc from the center outwards.

    Do not use any strong solvents such as alcohol, benzine, thinner, commercially
    available cleaners or anti-static sprays intended for vinyl records.

    The
    symbol on the screen
    During operation, may appear on the screen. This symbol means that the desired
    function is not available at the moment.
    Disc symbols in the operating instructions
    If part of the operating instructions contains one of the symbols listed below, the
    section is only applicable to the disc shown on the symbol.
    Many functions of this recorder are dependent on the selected recording quality.
    One or more of the symbols are displayed for each function described in the manual
    so that you can immediately see whether the disc supports this function.

    HDD Title on HDD

    DVD ALL All DVDs listed below

    -RW Video DVD-RW Disc with video mode

    -RW VR DVD-RW Disc with VR mode

    -R DVD-R disc

    +R DVD+R disc

    +RW DVD+RW disc

    DVD-V DVD-Video disc

    VCD Video-CD

    CD Audio-CD

    DivX DivX/Xvid files

    MP3 MP3 files

    WMA WMA files

    JPEG JPEG files

    15 -



  • Page 16

    Initial Installation
    Initial Remote Control Setup

    Connecting to the Aerial
    Remove the existing aerial cable plug (R) (for analogue, terrestrial or cable TV) from
    the TV and plug it into the aerial socket on the back of the recorder (IN ( from
    ANT.)). Then plug one end of the aerial cable provided into the TV socket on the
    recorder (OUT (To TV)) and the other end into the aerial socket on the TV.

    Connecting to the Television

    To insert or change the batteries, press on the imprinted arrow. Sldie off and remove the
    battery compartment cover. Insert alkaline-manganese LR 03 (AAA) type batteries and
    make sure the + and – poles are aligned correctly. Then, replace the cover.

    Switching over to Progressive Scan
    With the “Progressive Scan” mode you get the best possible picture quality without flicker in the “Component Video” mode in display units which support this
    operating mode.

    ➠ Your recorder must be switched on. An HDMI cable is not
    plugged.
    Button on the recorder.
    On: 576 P appears briefly in the recorder display.
    Off: 576 I appears briefly in the recorder display.

    Connections - General
    ➠ Depending on your television set and the other units you want to connect,
    there are several ways of connecting your recorder to your TV set. Only use
    the connection methods described below.

    ➠ Refer as necessary to the manuals for your television, recorder, stereo system
    and other units in order to make the best possible connections.

    ➠ The recorder must be connected directly to the TV set. Use the “connection
    wizard” for this in Loewe TV sets.

    ➠ Do not connect the Recorder AUDIO OUT socket to the audio system Phono
    In socket.

    - 16

    Make the following connections depending on the scope of functions of your
    existing equipment (refer to page 17).
    When connecting to a LOEWE TV set, the recorder must be logged in to the connection wizard of the TV set at the appropriate connection first.
    Euro AV1 connection
    Connect the AV1 socket on the recorder using the enclosed Euro AV1 cable (Scart)
    with the corresponding socket on the TV.
    HDMI connection
    Connect the HDMI OUTPUT socket of the recorder to the HDMI input socket on
    the TV set with the HDMI cable provided (HDMI socket 1 in Loewe). Make the
    settings as described on page 37. The Euro AV connection is required additionally
    for recording from the TV set.

    Alternative connections
    S-Video connection
    Connect the S-VIDEO OUT socket of the recorder to the S-Video input socket of
    the TV set with the S-Video cable.
    Component Video connection
    Connect the COMPONENT VIDEO OUT sockets on the recorder to the appropriate
    input sockets on the TV set with a Y Pb Pr cable (available from your dealer).
    Audio connection (left/right)
    Connect the left and right AUDIO OUT socket of the recorder to the left and right
    AUDIO IN sockets on the TV set with the audio cables.
    Digital Audio output
    Connect the DIGITAL-OUT socket of the recorder to the DIGITAL-IN socket of
    the surround amplifier.



  • Page 17

    R
    Surr.

    Initial Installation

    OFF

    L
    R

    Bass Intensity

    Front C
    Min.
    Max.
    Phase

    L

    Connecting to a Loewe TV System

    0

    Make the connections as shown here:
    Audio Link

    Line IN

    Right Subw. Left
    Surr.
    Front
    Right Center Left

    180

    Crossover Frequency

    50

    250.

    Audio-Link
    230V~50/60Hz
    System connector

    Loewe Individual Sound-System (Subwoofer)

    Aerial cable

    Back of the television

    Euro-AV cable

    HDMI cable

    Aerial cable
    Back of the recorder

    Mains cable
    17 -



  • Page 18

    Initial Installation
    Connecting to a set-top box / Satellite
    Receiver

    Connecting to an External Decoder Box

    If you use a cable or satellite receiver with integrated decoder, connect it to your
    recorder and television set as described below. If you use a separate decoder box
    for your cable/satellite television, follow the instructions in the next section “Connecting to an External Decoder Box“.
    1. Connect the aerial cable as shown. This enables you to watch and record TV
    channels.
    . Connect the AV1 connection to a AV socket on your TV set with the Scart cable.
    This enables you to view discs.
    . Connect the AV2 DECODER connection to a AV socket on your set-top box /
    your satellite receiver. This enables you to watch its TV channels.

    ➠ This recorder is equipped with a “Loop-Through“ function. The function
    enables you to record a TV program from the integrated analog terrestrial TV
    tuner of this recorder while watching a satellite or set-top box channel. Do
    not connect the recorder “via“ your video recorder, satellite receiver or set-top
    box.
    Antenna/
    cable television
    wall socket
    Set-top box or
    satellite receiver
    AERIAL
    INPUT

    AERIAL
    OUTPUT

    SCART AV1

    SCART AV2

    If you use an external decoder box for your satellite or cable TV system, follow the
    connection procedure described below.
    1. Connect your aerial socket in the wall to the aerial input socket on your set-top
    box / satellite receiver using an aerial cable.
    . Connect the decoder to the AV DECODER socket on the set-top box /satellite
    receiver using a SCART cable. Further instructions can be found in the manual
    for your decoder box.
    . Connect the AV2 socket on the DVD recorder to a AV 2 socket on your set-top
    box / satellite receiver using a SCART cable.
    4. Connect the AV1 socket on the DVD recorder to a AV 1 socket on your television using the SCART cable.

    ➠ Do not connect the Decoder-Box directly to the recorder but as shown in the
    figure below to the satellite/set-top box.

    ➠ Stations from the decoder (e.g. via Pay-TV services) can only be viewed when
    the recorder is switched off (standby mode).

    ➠ For timer recordings to work properly on this recorder, the satellite / set-top
    box must also be switched on during recording.

    ➠ With this configuration you cannot watch one television broadcast and record
    another at the same time.
    Antenna/
    cable television
    wall socket

    Set-top box or satellite receiver
    AERIAL
    INPUT

    AERIAL
    OUTPUT

    SCART AV1

    Decoder

    SCART AV2

    SCART AV

    Back of the recorder
    SCART INPUT
    S-VIDEO
    INPUT

    COMPONENT VIDEO INPUT

    Y

    Pb

    Pr

    AUDIO INPUT

    L

    VIDEO
    INPUT

    HDMI
    INPUT

    R

    Back of the recorder

    Back of the television
    SCART INPUT
    S-VIDEO
    INPUT

    COMPONENT VIDEO INPUT

    Y

    Pb

    Pr

    AUDIO INPUT

    L

    R

    Back of the television

    - 18

    VIDEO
    INPUT

    HDMI
    INPUT



  • Page 19

    Initial Installation
    Connecting to an Amplifier

    ➠ If the audio format of the digital output does not correspond to the capa-

    Connecting to an analog amplifier with analog 2-channel
    stereo or Dolby Pro Logic II / Pro Logic
    Connect the left and right AUDIO OUT socket of the recorder to the left and
    right AUDIO IN sockets of the amplifier, receiver or stereo system with the audio
    cables (A).

    5.1 Digital surround sound via the digital connection can only be obtained if
    your receiver is equipped with a digital multi-channel decoder.

    Connecting to a digital amplifier with two-channel digital
    stereo (PCM) or to an audio/video receiver with a multichannel decoder (Dolby Digital™, MPEG 2 or DTS)
    1. Connect one of the DIGITAL AUDIO OUT sockets (OPTICAL O or COAXIAL
    X) of the recorder to the appropriate input socket on your amplifier. Use an
    appropriate digital audio cable (optical O or coaxial X - available from your
    dealer).

    bilities of your receiver, the receiver will emit a strong distorted sound or no
    sound at all.

    You can obtain information about the audio format of the current DVD via the
    Info menu (Page 36).

    Connecting Audio/Video (A/V) Accessories
    Connect the input sockets (AV2 on the back of the device or AV3 = input on the
    front of the device (page 6)) of the recorder to the audio/video out sockets of the
    accessory components with the audio/video cables.
    If you have connected a device to AV2 and switched off its power supply, the
    Digital Link Plus function to the recorder is not possible.

    . You must configure the digital output of the recorder (Page 29).
    AUDIO
    OUTPUT

    Back of the recorder

    Connector block for an
    accessory component
    (VCR, Camcorder, etc.)

    R

    L

    VIDEO
    OUTPUT

    O

    A

    X

    OPTICAL

    COAXIAL

    DIGITAL INPUT

    DIGITAL INPUT

    L

    R

    AUDIO INPUT

    P+

    Amplifier (Receiver)
    Video

    Digital multi-channel sound
    A digital multi-channel connection offers the best sound quality. You will need a
    multi-channel audio/video receiver which supports one or more audio formats, e.g.
    MPEG 2, Dolby Digital and DTS. You will find information in the documentation
    enclosed with the receiver.

    L-Audio-R

    Front of the recorder

    ➠ Due to the DTS licensing agreement the digital output will be to DTS DIGITALOUT when a DTS audio stream is selected.

    This recorder does not perform a (2-channel) decoding (downmix) of a DTS
    sound track internally. In order to enjoy DTS multi-channel surround sound, you
    have to connect this recorder to a DTS-compatible receiver via one of the
    recorder’s digital audio outputs.

    19 -

    P



  • Page 20

    Initial Installation
    Connecting a digital camcorder

    Concealed installation

    You can connect a digital camcorder (DV) or a digital DVD-R/RW recorder to the
    DV IN socket and transfer contents of DV tapes or DVDs digitally.
    Use a DV cable (not included in delivery) to connect the DV IN-/OUT socket of
    your DV-camcorder/video deck to the DV IN socket on the front control panel of
    this recorder.

    With Digital Link, Loewe TV sets pass on the signals from the remote control through
    the Euro-AV connection on the recorder. Digital Link is useful when you want to
    put the recorder in a concealed place, e.g. in a closed rack.

    ➠ Your recorder must be switched on.

    ➠ Only DV units can be connected to this socket (the source signal must be in

    Button on the recorder for > 3 s

    the DV-25 format; see page 53). It is not compatible with digital satellite
    tuners or S-VHS video decks.

    Digital Link on: LINK appears in the recorder display.
    Digital Link off: FRONT appears in the recorder display.

    DV Digital Camcorder

    Resetting the DVD Recorder
    P+

    DV
    IN/OUT

    Front of the recorder

    P-

    If any of the following problems occur.
    • The unit is plugged in but will not turn on or off.
    • The display panel does not work.
    • The Recorder is not functioning normally.
    the Recorder can be reset in the following way:
    AV

    Connect to the mains

    Hold down the button on the device for at least five seconds.
    The device switches off or pull out the power cable, wait at least
    20 seconds and reconnect the cable.

    First plug the small plug on the power cable into the mains connection on the
    back of the recorder then plug the large mains plug into a 200-240V/50-60Hz
    mains socket.

    Press the button again to switch the device back on.

    Basic Settings
    Set the remote control for recorder operation.
    Push the On/Off button on the DVD recorder or

    the On/Off switch on the remote control.

    ➠ If you aim the remote control at the recorder when switching over to
    Recorder mode, the recorder will be switched on.

    - 20



  • Page 21

    Initial Installation
    Auto Setup

    Manual: Enter the date and time.

    After you have pressed the On/Off button for the first time or reset the device to the
    factory settings, the wizard for the automatic setting starts. This sets the language
    of the menus and dialogs of the recorder, the time and the stations.

    3 4 Move cursor.

    5 6 Select menu Language.

    5 6 Enter data.
    Confirm with OK .
    5 6 Select country.
    4Press.

    Language

    5 6 Select Signal Source.
    4 Mark Start.
    Start station search with OK.

    Select the Language.
    English

    Auto Programming
    OK

    Next

    Select a mode
    Others

    Confirm selection with OK.
    Check the antenna connection as illustrated.

    Signal Source

    DVB-T+Analogue

    Start
    Prev.

    Antenna
    Check your antenna connection.
    Antenna
    Wall jack
    Cable

    TV
    IN (from ANT.)
    DVDRecorder
    OUT (to TV)

    Prev.

    OK

    Next

    Continue with OK.

    OK

    Start

    The receiver runs through all the available analogue and digital
    channels automatically and transfers the found stations to the
    station list. In the DLP option the station list is transmitted by a
    Loewe TV set with Digital Link Plus (page 24).
    End
    Initial Setup is Completed.

    5 6 Set time. Select Auto or Manual.
    Confirm selection with OK.
    Clock Set

    Prev.

    Select a mode.

    OK

    Close

    Confirm selection with OK.

    Auto
    Manual

    Prev.

    OK

    Next

    Auto: The current time and date are set automatically after the
    station search (see ”Set time” on page 27).

    21 -



  • Page 22

    Initial Installation
    Menu overview
    Main menu
    TV
    TV HDD
    TV DVD
    Timer Record
    ShowView

    MOVIE
    HDD
    HDD DivX
    DISC
    USB

    PHOTO
    HDD
    DISC
    USB

    SPECIAL

    MUSIC
    HDD
    DISC
    USB

    Rec Mode Set

    SETUP
    Start

    Setup menu
    General
    Auto Programming
    Country
    Antennae / DLP

    Program Edit
    Add Channel
    Edit

    Clock Set

    Language
    Display Menu
    Disc Menu
    Disc Audio
    Disc Subtitle
    DTV Audio
    DTV Subtitle
    DivX Subtitle

    Audio
    Dolby Digital
    PCM
    Bitstream

    DTS
    OFF
    Bitstream

    MPEG

    Auto
    Manual

    TV Aspect
    4:3 Letter Box
    4:3 Pan Scan
    16:9 Wide

    AV2 Connection
    Decoder
    Others

    Video output format
    RGB
    YPbPr

    Power Save Mode
    OFF
    ON

    Antenna Feed 5V
    OFF
    ON

    Initialization
    Factory Set
    HDD Format
    - 22

    PCM
    Bitstream

    Sampling Freq.
    48 kHz
    96 kHz

    DRC
    OFF
    ON

    Vocal
    OFF
    ON

    Recording

    Lock
    Lock System
    OFF
    ON

    DVD Rating
    DTV Rating
    Set Password
    Change
    Delete

    Area Code
    DivX Reg. Code

    Rec Mode Set
    EQ
    LQ
    SQ
    HQ

    Rec Aspect
    4:3
    16:9

    DV Rec Audio
    Audio 1
    Audio 2

    TV Rec Audio
    Main+Sub
    Main
    Sub

    Auto Chapter
    None
    5 Min
    10 Min
    15 Min

    AV2 Recording
    Auto
    CVBS
    RGB

    Timeshift
    OFF
    ON

    Disc
    Disc Format
    Finalize
    Finalize
    Unfinalize

    Disc Label
    Disc Protect
    OFF
    ON

    PBC
    OFF
    ON



  • Page 23

    Initial Installation
    Main menu (HOME)

    Setup menu

    All media files can be called from the main menu for playing and recording with
    the recorder.

    The menu system offers several ways of changing settings. Most menus consist
    of three levels for setting up options. If you press
    only the first and second
    levels of the menu system are displayed on the screen. You can display the third
    level by pressing 4. When navigating in the menus, 4 on the right side of the
    menu tab shows you that the next level can be called up.

    Call main menu.
    34Select desired operating mode.
    56 Call options.
    Confirm selection with OK.
    Exit main menu.

    Auto Programming
    Program Edit
    Clock Set
    TV Aspect
    AV2 Connection
    Video output format
    Power Save Mode
    Antenna Feed 5V
    Initialization

    MUSIC
    HDD
    DISC
    USB

     Prev.





    TV TV HDD: Live TV picture on – record on HDD.
    TV DVD: Live TV picture on – record on DVD.
    Timer Record: Display of Timer Record List menu (page 52).
    ShowView: Display of Show View menu (page 51).

    MOVIE HDD: Display the Title List menu of the HDD (page 54).
    HDD DivX: Display the Movie List menu of the HDD (page 42).
    DISC: a.) Display of Title List of a rewritable disc (page 54).
    b.) Display of the Title List menu of a DivX disc (page 42).
    c.) Play a Video-CD or DVD-Video-Disc (page 38).
    USB:Display of the Movie list of the USB media.

    PHOTO (page 46)
    HDD: Display the Photo List menu of the HDD.
    DISC: Display the Photo List menu of the disc.
    USB:Display of the Photo List menu of the USB media.

    MUSIC (page 43)
    HDD: Display the Music List menu of the HDD.
    DISC: Display the Music List menu (or Audio-CD) of a disc.
    USB: Display the Music List menu of the USB media.

    SPECIAL Display of the Rec Mode Set menu (page 32).

    SETUP Call the Setup menu (this page).

    Auto
    Manual
    Time Offset

    Move

    OK

    0

    Select

    1. Level 2. Level 3. Level

    Navigation in the menu
    The arrow buttons of the Assist remote control are illustrated as follows in this
    user guide:
    The arrows correspond in the text: “5634“.
    The OK function is shown in the text as OK.
    Call menu.
    5 6 Select desired option.
    4 Call second level.
    5 6 Select second option.
    4 Call third level.
    5 6 or 4to select the desired setting.
    Confirm selection with OK.
    Exit menu.

    23 -



  • Page 24

    Initial Installation
    The General Menu
    Automatic programming
    This recorder is equipped with a receiver (tuner) which can receive a maximum 88
    analogue and 165 digital channels.

    ➠ When using Digital Link Plus the analogue station list is adapted to the TV
    set (on this page).

    ➠ Connect the recorder to the TV set with Digital Link Plus with a SCART con-

    ➠ Connect the recorder to the aerial system (page 16).

    nection (page 16).

    Call menu.

    ➠ If the recorder has taken over the analogue stations from a Loewe TV via
    Digital Link Plus (DLP), the functions Block, Program Edit, Move and Delete
    are locked and cannot be used again until the analogue stations have been
    overwritten again by automatic programming.

    5 6 Select
    General symbol.
    4 Call second level.
    5 6 Select Auto Programming.
    4Mark country option.
    5 6 Select Country.
    4Press.
    5 6 Select Analogue, DVB-T or DVB-T+Analogue.
    Start channel search.

    ➠ When „France“ is selected as the country and „DVB-T“ is selected as the TV
    standard, the VHF bandwidth for DVB-T can be set between 7 and 8 MHz
    with the blue colour key.
    Transfer analouge station list
    Call menu.

    The tuner runs through all the available channels automatically
    and transfers the found stations to the tuner memory.
    Auto Programming
    Program Edit
    Clock Set
    TV Aspect
    AV2 Connection
    Video output format
    Power Save Mode
    Antenna Feed 5V
    Initialization
     Prev.

    Others
    DVB-T+Analogue
    Stop
    Search

    5 6 Select
    General symbol.
    4 Call second level.
    5 6 Select Auto Programming.
    4 Press 2 times.
    5 6 Select DLP.
    4Press. The Start button is marked.
    Auto Programming
    Program Edit
    Clock Set
    TV Aspect
    AV2 Connection
    Video output format
    Power Save Mode
    Antenna Feed 5V
    Initialization

    20 %

    OK

    Select

    Digital Link Plus
    If you have connected the recorder to a Loewe TV set with Digital Link Plus or a
    comparable system of another make (e.g. EasyLink, Mega Logic, Project 50), the
    analogue station list will be transferred from the TV to the recorder. This happens
    when you log in the recorder on the TV set or when you change (resort, delete,
    add new ones) the analogue stations on the TV set. After such a change, the TV
    will prompt you to start transfer of the changed analogue station list.
    The recorder detects a connected TV set with Digital Link Plus or a comparable
    system of a different make and sets the recorder accordingly. Then you can no
    longer search for, delete or sort TV stations on the recorder. The menu items are
    displayed in grey. Please note that all analogue stations which you receive via
    antenna or cable have to be saved on station slots 1 to 88 in the TV set. If the
    TV set does not prompt you to transfer the analogue station data, start transfer
    on the recorder.
    - 24

    Please only make all the changes to the analogue stations on the TV set when
    your TV set is equipped with Digital Link Plus or with a comparable system of
    another make.
    If your TV set to which you have connected the recorder does not have Digital Link
    Plus or a comparable system, you should match up the analogue stations lists of
    the recorder and the TV set. This makes it easier for you to find the channels on
    the TV set and the recorder.

     Prev.

    Others
    DLP
    Start

    OK

    Select

    Start transfer of the analogue stations list from the TV to the
    recorder.
    This may last a few seconds. The display on the recorder shows
    DLP during the transfer.

    ➠ (Viewvision DR+ DVB-T Secam). French analogue stations will only be transferred in the correct standard with Digital Link Plus if you select France as
    the country (see above) first.



  • Page 25

    Initial Installation
    Add station manually
    You can add a station manually.

    Station list menu
    You can change (rename, move, delete, etc.) a station.

    ➠ CIf the Lock option (page 30) is set to On, a password is required for the

    ➠ Not with Digital Link Plus (DLP).

    Program Edit option.

    ➠ CIf the Lock option (page 30) is set to On, a password is required for the

    Call menu.

    channel setting option.

    5 6 Select
    General symbol.
    4 Call second level.
    5 6 Select Program Edit.
    4 Call third level.

    Call menu.

    5 6 Mark Add Channel.

    5 6 Select
    General symbol.
    4 Call second level.
    5 6 Select Program Edit.
    4 Call third level.

    Confirm.

    5 6 Mark Edit.

    5 6 Select Mark Analog or Digital.
    4Press.

    Confirm. The Station List menu is displayed.

    Auto Programming
    Program Edit
    Clock Set
    TV Aspect
    AV2 Connection
    Video output format
    Power Save Mode
    Antenna Feed 5V
    Initialization
     Prev.

    Move  Next

    ANALOG TV

    005

    Digital
    ARD

    177.5 MHz

    TV

    1

    RADIO

    0

    OK

    PR-04

    Select

    OK

    5 6 Select PR number.
    The channel search starts automatically. The search stops when
    a station is found.
    Add new station.
    Close menu.

    NICAM

    Favourites
    Delete
    Move
    Block
    Station Rename
    Program Edit

    Select

    PR

    Ch. MFT Station

    01
    02
    03
    04
    05
    06
    07
    08
    09

    C12
    C23
    C7
    C27
    C17
    C33
    C34
    C47
    C10

    0
    0
    0
    0
    0
    0
    0
    0
    0

    ARD
    ZDF
    RTL
    SAT1
    PRO7
    BBC
    CNN
    ABC
    TV5

    P+/P- Page Up/Down

    END

    Close

    The available options are displayed at the left.







    Favourites
    Delete
    Move
    Block
    Station Rename
    Program Edit

    Assign the selected station to the favourites list.
    Delete station from the station list.
    Move station in the station list
    Lock the station. See “Lock” page 30.
    Change name (page 58)
    search, channel input, fine adjustment

    Close menu.
    Switch station list
    You can switch the station list to display digital, analogue and radio stations.
    Open the station list menu.
    5 Move the cursor to the top position.
    34 Select DIGITAL TV, ANALOG TV or RADIO .
    6 Go to the station list.
    25 -



  • Page 26

    Initial Installation
    Change station
    You can set an analogue station manually.

    Moving stations
    You can sort the order of analogue stations in the Station List menu.

    ➠ Not with Digital Link Plus (DLP).

    ➠ Not with Digital Link Plus (DLP).

    Open the Station list menu (page 25).
    5 6 Select PR number.

    ➠ Not valid when receiving digital TV channels which have a permanent programme assignment number (LCN).

    Confirm.
    5 6 Select Program Edit.

    5 6 Select station in the Station List menu.

    Confirm with OK.

    Confirm with OK.

    The Program Edit menu is displayed.

    The available options are displayed at the bottom left.

    PR
    25

    Seek

    Ch.
    S 23

    5 6 Select Move.

    MFT DECODER NICAM PAL/SECAM
    0

    OFF

    ON

    PAL

    OK

    3 4 Move the cursor to the previous / next column.
    5 6 Edit the setting at the current cursor position.
    Explanations of the settings

    PR Indicates the selected station number (display only).

    Seek Searches for stations automatically.
    3 4 Select Seek and then
    5 6 start search. The search is stopped when the recorder
    receives a station.

    Ch. Changes the channel number.
    3 4 Select Channel and then
    5 6 set.

    MFT Changes the frequency for manual fine tuning.
    3 4 Select MFT and then
    5 6 set.

    DECODER When option ON coded stations are received by a connected
    decoder.

    NICAM Switch NICAM reception on/off. Select option OFF in case of
    sound interference.
    PAL/SECAM changes the reception standard for Viewvision DR+ DVB-T
    Secam.
    3 4 Select PAL/SECAM in case of distorted negative
    picture.
    5 6 Select SECAM for the SECAM-L standard.

    OK Save settings.

    - 26

    Confirm with OK.
    5 6 Select desired PR slot.
    OK Save settings.
    Delete Station
    You can delete a station in the Station List menu.

    ➠ Not with Digital Link Plus (DLP).
    5 6Select station in the Station List menu.
    Confirm with OK.
    The available options are displayed at the bottom left.
    5 6 Select Delete.
    OK The station is deleted.



  • Page 27

    Initial Installation
    Clock set
    When the automatic station search has finished, the date and time are set automatically (depending on the transmitting station), also when power is recovered.
    The Auto option must be set for this.
    Auto Programming
    Program Edit
    Clock Set
    TV Aspect
    AV2 Connection
    Video output format
    Power Save Mode
    Antenna Feed 5V
    Initialization
     Prev.

    Move

    Auto Programming
    Program Edit
    Clock Set
    TV Aspect
    AV2 Connection
    Video output format
    Power Save Mode
    Antenna Feed 5V
    Initialization

    Auto
    Manual
    Time Offset

    0
     Prev.

    Move

    OK

    Select



    Date

    6 / 12

    Year

    2008

    Time

    10 : 57

     Next

    OK

    Select

    3 4 Move cursor.
    5 6 Enter data.

    5 6 Select
    General symbol.
    4 Call second level.

    Confirm with OK.

    5 6 Select Clock set.
    4 Call third level.
    5 6 Select Auto.
    4 Select Time Offset.
    5 6 Set time offset of 0, 30, 60, 90 or 120 minutes in case
    the automatic set time differs from the local time.
    Confirm with OK.
    Exit menu.

    ➠ Please check by pressing

    in TV mode whether the year and date have
    been automatically set correctly. You may have to set it manually as described
    under “Manual setting of date / time”.

    Manual Setting of the Date / Time
    It is possible that the television station may broadcast incorrect date and / or time
    information or no information at all and that the Recorder sets the incorrect time.
    If this is the case we recommend that you set the clock manually.

    Exit menu.
    TV Aspect
    You can choose:
    4:3 Letter Box Recordings in wide-screen format appear with a black bar at
    the top and bottom edges of the screen.
    4:3 Pan Scan The picture fills the whole screen but cuts off sections at both
    sides if necessary.
    16:9 Wide Select this setting if a wide-screen TV set with 16:9 picture
    format is connected.

    ➠ If the resolution is set to 720p or 1080i, this option is not available.
    AV2 Connection
    You can connect the following devices to the AV2 DECODER connection on the
    back of the recorder:

    Decoder Connect a Pay-TV or Canal+ decoder.

    Others Connect a video recorder or similar device.
    Auto Programming
    Program Edit
    Clock Set
    TV Aspect
    AV2 Connection
    Video output format
    Power Save Mode
    Antenna Feed 5V
    Initialization

    Call menu.
    5 6 Select
    General symbol.
    4 Call second level.
    5 6 Select Clock set.
    4 Call third level.
    Confirm with OK.

    Manual

    Enter the date and time.

    Call menu.

    5 6 Select Manual.

    Auto

     Prev.

    Move

    Decoder
    Others

    OK

    Select

    27 -



  • Page 28

    Initial Installation
    Video output format
    Select the video output format depending on which video interface you are
    using (page 16):

    RGB The TV set is connected to the Scart socket AV1.

    YPbPr The TV set is connected to the COMPONENT VIDEO OUT
    socket.
    Power Save Mode
    You can set the recorder so that it consumes < 1 Watt on standby. In the On position,
    the decoder signal is switched from AV2 to AV1 and the display switched off.
    Antenna Feed 5V
    For a directly fed aerial, the aerial supply (DC 5 V/100 mA) must be activated with
    On. The aerial is supplied via the IN (from ANT.) input.

    ➠ In case of an overload or short-circuit in the aerial supply, it is switched off

    Language Menu
    Menu Language
    Select a language for the menus and dialogues displayed by the recorder.
    Call menu.
    5 6 Select symbol
    4 Call second level.

    5 6 Select Display Menu.
    4 Call third level.
    5 6 Select English.
    Confirm with OK.

    automatically. Eliminate the fault and switch the aerial supply back on.

    ➠ If an analogue channel is currently set, the 5 V aerial voltage is outputted for
    all analogue and digital channels when On. If a digital channel is currently set,
    the 5 V aerial voltage is outputted only for digital channels when On. Therefore,
    external aerial change over switches can be used, for example.
    Initialization
    You can reset the recorder to the factory settings and format the harddisc if
    necessary.

    Factory Set Select this option to reset the recorder to its works
    settings.
    ➠ Some options cannot be reset like this (safety
    stage, password, country code, station list, timer list).
    Then Auto Setup is executed (page 21).

    HDD Format The harddisc is formatted and all data on it are
    deleted.

    Language.

     Prev.

    Display Menu

    English

    Disc Menu

    Deutsch

    Disc Audio

    Français

    Disc Subtitle

    Italiano

    DTV Audio

    Español

    DTV Subtitle

    Nederlands

    DivX Subtitle

    Svenska

    Move

    OK

    Select

    Disc Languages
    Select a language for the disc‘s menu, audio and subtitles.
    If another language is to be used as the “original” version of the disc, select this
    here if it is available on the Disc.

    Original The original language of the disc is selected.

    Others Select other language with Other and confirm with OK. Enter
    the corresponding four-digit number from the “language code
    list” on page 68 and confirm with OK.

    Off Switch off disc subtitles.
    DTV Audio
    With digital stations several audio channels, e.g. for different languages, may be
    broadcast. Select the desired language.
    DTV Subtitle
    With digital stations subtitles may be offered in different languages. Select the
    desired language.
    DivX Subtitle
    Select the desired character set for DivX subtitles.

    - 28



  • Page 29

    Initial Installation
    Audio Menu

    Lock Menu

    Each DVD disc offers a variety of audio formats. Set the audio format for the
    recorder according to the type of audio system you are using.

    Set Password

    Dolby Digital / DTS / MPEG

    PCM Select this option if the unit is connected to a digital two
    channel stereo amplifier. The DVD recorder‘s digital audio
    outputs emit sound in PCM 2 channel format if you play a
    DVD-Video disc with Dolby Digital audio format.

    Bitstream Select Bitstream if you have a Dolby Digital decoder (or
    amplifier, a Loewe TV with AC3 or DIS module or another unit
    with Dolby Digital decoder) connected to the DIGITAL OUT
    socket of the DVD recorder.

    OFF If you select OFF the DTS signal is not emitted from the
    DIGITAL OUT socket.
    Sampling Frequency
    If your receiver or amplifier is NOT designed for 96 kHz signals, select 48 kHz. If
    you have made this selection, the unit automatically converts the 96 kHz signals to
    48 kHz signals that the system can decode. If your receiver or amplifier is designed
    for 96 kHz signals, select 96 kHz.
    Night Mode (DRC)
    Thanks to digital audio technology the DVD format enables you to hear soundtracks
    in the most accurate and realistic way possible. However, you may wish to limit
    the dynamics (i.e. the difference between the loudest and the quietest sounds). In
    this way you can play a film with minimum volume differences. For this purpose
    switch DRC to ON.
    Dolby Digital

    Lock System
    DVD Rating
    DTV Rating
    Set Password
    Area Code
    DivX Reg. Code

    Change
    New Password
    Delete
    OK

    0-9 Input

     Prev.

    Call menu.
    5 6 Select symbol

    Lock.

    4 Call second level.
    5 6 Select Set Password.
    4 Call third level.
    If you have not yet entered a password
    Enter a four-digit number with number buttons.
    Confirm with OK.
    Enter password to check.
    Confirm with OK.

    DTS

    If you have already entered a password

    MPEG
    Sampling Freq.
    DRC

    OFF

    Vocal

    ON

    Select Change.
    Confirm with OK.
    Enter current password.
    Confirm with OK.

     Prev.

    Move

    OK

    Select

    Karaoke Audio (Vocal)
    Switch the singing option (Vocal) on, if you want to play a multi-channel karaoke
    DVD. The karaoke channels on the disc are mixed into normal stereo sound.

    Then enter a new four-digit password.
    Confirm with OK.
    Enter password to check.
    Confirm with OK.

    ➠ If you make a mistake, press 3repeatedly before you press OK to delete or
    correct the password numbers one after another.
    29 -



  • Page 30

    Initial Installation
    Switching off the password
    Proceed as follows if you want to switch off the password.
    Open menu as under “Define password” (page 29).

    DVD Rating
    This function prevents playing of DVDs unsuitable for children if these contain
    the appropriate code.
    Open menu as under “Define password” (page 23).

    Call menu.

    5 6 Select DVD Rating.

    5 6 Select Set Password.

    Lock System

    4 Call third level.

    DVD Rating

    5 6 Select Delete.

    DTV Rating

    Confirm with OK.

    Area Code

    Set Password
    DivX Reg. Code

    Enter a four-digit number with number buttons.
    Confirm with OK.
     Prev.

    Delete Password
    If you forget your password, proceed as follows to delete the current password.

    Move

    No Limit
    8 (Adult)
    7
    6
    5
    4
    3
    2
    1 (Children)
    OK

    Select

    4 Call third level.

    Call menu.
    Enter the four-digit password with the numeric buttons (page 23).

    Enter the six-digit number “210499” with the number
    buttons.
    A message is displayed.
    3 4Select the yes button.

    Confirm with OK.



    Confirm with OK.
    The four-digit password is deleted. Enter a new password as
    described above.
    Lock System
    Certain stations and DVDs can be locked. If the Lock option is set to On, locked
    contents are skipped (see Station lock in the Station list menu, page 25). A password is then required for the functions in the “Lock” menu. The password is also
    necessary to see a locked station/contents. If the Lock option is set to Off all the
    locks are released.

    Confirm with OK.
    Rating digital TV
    You can lock digital TV programs above a certain age category. The classification
    of the program depends on the respective program provider.
    Open menu as under “Define password” (page 23).
    5 6 Select DTV Rating option.
    Enter four-digit password.

    Open menu as under “Define password” (page 23).
    5 6 Select Lock System option.



    4 Call third level.
    Enter the four-digit password with the numeric buttons (page 23).
    5 6 Switch Lock System On or Off.
    Confirm with OK.

    - 30

    5 6 Select security stage between 1 and 8.
    No Limit The disc is played completely.
    Step 1 to 8 Only the scenes of the loaded disc are played which
    correspond to the assigned security stage or a lower
    level. Stage “1” has the most playing restrictions.




    5 6 Select desired age limit.
    No control The lock is not active. You can watch all digital TV
    stations.
    4 ...18 Years The lock is active for programs above the set age limit.
    Lock All All programs are locked.
    Confirm with OK.



  • Page 31

    Initial Installation
    Area Code
    Enter the code for a country/region whose standards are to be used to rate the DVDVideo disc. (See “List of country code“ on page 65). For Great Britain select “G B“.
    Lock System
    DVD Rating
    G

    DTV Rating

    B

    DivX registration code
    You receive the DivX® VOD (Video On Demand) registration identification for
    hiring and purchasing films through the DivX® VOD-Service. Further information
    is available under:
    www.divx.com/vod.
    Open menu as under “Define password” (page 29).

    Set Password
    Area Code

    5 6 Select DivX Reg. Code.

    DivX Reg. Code

    4 Call View.
    Confirm with OK.

     Prev.

    Move

    Next

    OK

    The “registration code” valid for your device is now displayed.

    Select

    Open menu as under “Define password” (page 23).

    Lock System

    5 6 Select Area Code.

    DivX®Einstufung
    Video On Demand
    DTV
    Your registration
    code is: YJ3ZEJUR
    Zeige
    Passwort
    festlegen
    To learn more visit <www.divx.com/vod>
    Ländercode

    DVD Rating

    4 Call third level.
    Enter the four-digit password with the number buttons (see
    “Set Password”).

    DivX Reg. Code

    OK

    Confirm with OK.
     Prev.

    5 6 Enter data.

    OK

    Select

    You can use this registration code to hire or buy movies through
    the DivX® VOD Service under www.divx.com/vod.

    3 4 Move cursor.
    Confirm with OK.

    See the instructions for saving movies on a disc for playing on
    this recorder.

    ➠ All movies purchased from DivX® VOD can be played only on this
    recorder.

    31 -



  • Page 32

    Initial Installation
    Recording Menu

    DV Rec Audio
    You need to use this setting if your camcorder with
    32 KHz / 12-bit is connected to the DV IN socket on the front panel.
    Some digital camcorders have two stereo tracks for audio. One is used for recording, the other is used for post-editing.

    Audio 1 The original sound is recorded.

    Audio 2 The edited sound is used.

    Rec Mode Set
    You can set the picture quality for recording:
    DVD±R/RW (4,7 GB) HQ mode:
    approx. 1 hour.
    SQ mode: 2 hours.
    LQ mode:
    4 hours.
    EQ mode:
    6 hours.

    HDD (250 GB)




    HQ mode:
    SQ mode:
    LQ mode:
    EQ mode:

    TV Rec Audio
    When recording bilingual TV you can select the audio channel to be recorded.
    Main+Sub: both languages are recorded.

    Main: language 1 only.

    Sub: language 2 only.

    approx. 67 hours.
    approx. 125 hours.
    approx. 237 hours.
    approx. 355 hours.

    Rec Mode Set

    EQ

    Rec Aspect

    LQ

    DV Rec Audio

    SQ

    TV Rec Audio

    HQ

    Auto Chapter
    Chapter start marks are inserted at fixed intervals in recordings on DVDs in video
    mode. You can select intervals of 5, 10 or 15 minutes. If you select None automatic
    chapter setting is switched off.

    Auto Chapter
    AV2 Recording
    Timeshift

     Prev.

    Move

    OK

    Select

    Call menu.
    5 6 Select symbol

    Record.

    4 Call second level.
    5 6 Select Rec Mode Set.
    4 Call third level.
    56 Set desired recording quality (EQ, LQ, SQ or HQ).
    Confirm with OK.
    Rec Aspect
    You can adapt the picture format (16:9 or 4:3) to the material being recorded
    during the recording.

    - 32

    AV2 Recording
    The signal type can be selected to record the video in signal of a device connected
    to the AV2 DECODER.

    Auto The video in signal is adapted automatically to the received
    video signal.

    CVBS Only for recording a CVBS input signal.

    RGB Only for recording an RGB input signal.
    Timeshift
    The recorder can be set so that it is always in timeshift mode in the on state. Current TV programs are then recorded automatically (page 49).

    OFF Manual timeshift function.

    ON Automatic timeshift function.



  • Page 33

    Initial Installation
    Disc Menu

    Disc Format
    Select a mode.

    Disc Format
    A new disc is initialised by the recorder (on request) when inserted.

    VR Mode






    DVD-R
    DVD-RW
    DVD+R
    DVD+RW

    The recorder initializes the disc in “video mode”.
    The recorder initializes the disc in “video mode”.
    The recorder initializes the disc in “video mode”.
    The recorder initializes the disc in “video mode”.

    Video Mode

    The following prompt appears:
    Disc Format

    ➠ A DVD+RW or DVD-RW disc can also be initialised later by menu:

    All data on the disc will be deleted.
    Proceed?

    Start

    Disc Format

    OK

    Finalize

    Cancel

    Disc Label
    Disc Protect

    34 Select OK button.

    PBC

    Confirm with OK.

    ➠ When you start formatting all recordings on the disc are
    deleted.
     Prev.

    OK

    Select

    After pressing OK disc formatting begins. It can take a few
    minutes.

    Call menu.
    5 6 Select symbol

    Disc.

    4 Call second level.
    5 6 Select Disc Format.
    4 Call third level.
    OK call Start menu.
    3 4 Select a desired format for DVD-RW (Video mode or VR
    mode).
    Confirm with OK.

    33 -



  • Page 34

    Initial Installation
    Finalize
    Finalization fixes recordings so that the disc can be played on a regular DVD player
    or a computer with a suitable DVD-ROM drive. During finalization of a Video mode
    disc a menu is created for disc navigation (Page 64).

    ➠ Following recording and finalization of DVD-R and DVD+R discs no other
    editing or recording can take place. This does not however apply for a
    DVD+RW and DVD-RW disc.
    Disc Format

    Disc Label
    Use this option to enter a name for the disc. The name is displayed when the disc
    is loaded and when you display disc information on the screen.

    ➠ The disc name can be up to 32 characters long.
    ➠ For discs formatted on other recorders you will only see a limited character set.
    Call menu.
    5 6 Select symbol

    Finalize

    Finalize

    Disc Label

    Unfinalize

    Disc.

    4 Call second level.
    5 6 Select Disc Label.

    Disc Protect
    PBC

    4 Call third level.
    Confirm with OK.
    Change name (see page 58).

    Move

     Prec.

    OK

    Select

    Call menu.
    5 6 Select symbol

    Disc.

    4 Call second level.
    5 6 Select Finalize.
    4 Call third level.
    5 6 Select Finalize.
    Confirm with OK.
    Finalize
    Do you want finalisation?
    OK

    Cancel

    34 Select OK button.
    Confirm with OK to finalise the disc.

    ➠ The time needed for finalisation depends on the type of disc, how much is
    recorded on the disc and the number of titles on the disc. Finalisation of a
    prerecorded disc can take up to 30 minutes.

    ➠ When inserting a finalised DVD-RW, the finalisation can be cancelled by
    selecting Unfinalize in the Finalize menu. Then the disc can be edited and
    rewritten.

    ➠ The Disc Protect option must be set to Off to finalise.
    - 34

    Disc Protect
    Set Disc Protect to ON to avoid accidental recording, editing or deleting of the
    disc. To release the disc again, select OFF.
    PBC - Play-Back Control
    VCD, SVCD
    If a VCD (or SVCD) possesses the property of Play-Back Control (PBC) and the PBC
    menu is set to ON, the disc is played via the menu on the disc. Otherwise the VCD
    can be played like an audio CD but without a track list.



  • Page 35

    Operating convenience
    TV mode

    Selecting a station

    If you are currently watching a TV channel supplied by the integrated receiver of
    the recorder (recorder in Stop mode), you can show (and hide) information about
    the TV station with
    .
    Displays the disc format, free memory space and a progress display of the elapsed
    playing time.

    Station list
    There are three different station lists with which you can select stations conveniently.
    ANALOG TV: List of all analogue TV stations.
    DIGITAL TV: List of all digital TV stations.

    RADIO: List of all radio stations (DVB-T, if available).

    Indicates the channel number, the station name and the
    audio signal for the current program.

    Open station list (without previous onscreen displays).


    Detailed information on the current program.
    (only DVB-T).

    01
    02
    03
    04
    05
    06
    07

    Shows the program title,
    the running time, etc.
    See symbols below.
    04

    CH

    RTL Aktuell
    18:45-19:05

    News

    DVD-Video

    ARD
    ZDF
    RTL
    SAT1
    PRO7
    BBC
    CNN

    Favourites

    RTL



    DIGITAL TV

    OK

    Select

    You can choose from three different station lists.
    Select the desired station list with 34.
    Select the station with 56.

    24/05/2007 13:30



    P+/P- scroll in the pages of the station list.

    Shows the current date and time.

    OK the selected station is called.

    ➠ After ten seconds without a button being pressed the screen menu switches
    off automatically.


    Buttons of the remote control

    This symbol indicates that detailed information about the selected
    program are available (see page 36).

    P+/P- Station up/down.

    This symbol indicates that subtitles are available to the current
    program.

    Enter program with the numeric buttons.

    This symbol indicates that the present program is broadcast in
    wide screen format.
    ()

    OK and then press the blue button to open the Favourites list
    menu (page 25).

    35 -



  • Page 36

    Operating convenience
    EPG program guide

    Disc playback

    The EPG program guide contains the programs and times for DVB-T programs.
    Here you will find all the programs with the program times and a short description
    of the content quickly and easily.

    You can display a variety of information about the inserted disc on the screen.
    Twice to select the Title menu.

    Displaying the program preview

    DVD-Video
    � 4/14 �
    1/10
    0:12:34
    1.STEREO
    OFF
    1/1
    NORMAL

    Switch on program guide.
    EPG (Electronic Programme Guide)
    Stations

    01 ARD
    02 ZDF
    03 RTL
    04 SAT1
    05 PRO7
    06 Kabel
    07 VOX
    08 3Sat

    │Now

    │Next

    Tagesschau
    Heute
    RTL Aktuell
    Sat 1 News
    Newstime
    K1 Nachrichten
    News
    Heute
    Tagesschau

    OK

    Switch to

    12:00 12 Oct

    Mittagsmagazin
    Drehscheibe
    Punkt 12
    Blitz
    Galileo
    K1 Magazin
    Wissenshunger
    nano

    8 Days

    Title
    Move 0-9 Input

    Detail







    OK switch to the selected station. The program titles for the
    selected station are displayed after a short time.



    Press the red button to record the selected program. An entry
    appears in the timer list (page 52).
    Press the green button to select another date up to one week
    into the future with 34 and confirm with OK.
    Press the yellow button to change between the Now/Soon and
    8 days views.
    Press the blue button to call detailed information about the
    selected program.

    - 36




    P+/P- scroll in the pages of the EPG.

    Exit the menu and return to the selected station.

    Enter

    5 6 Select the desired function.

    Select station/programs with 3456.

    ()

    OK

    Title
    Chapter
    Time
    Audio

    Current title (or track number)/total number of titles (page 38).
    Current chapter number/total number of chapters (page 38).
    Elapsed playing time (page 39).
    Selected sound formats, movie language and audio channels
    (page 40).
    Subtitle Selected subtitle (page 41).
    Angle Selected camera position / total number of camera positions
    (page 40).
    Sound (3D-surround) selected sound mode (page 40).
    Exit menu.



  • Page 37

    HDMI mode
    HDMI (DVI) connection
    The HDMI connection (High Definiton Multimedia Interface) allows digital picture
    and sound transmission via a connecting cable, e.g. to Loewe Flat TV sets. The
    digital picture and sound data are transmitted without data compression and therefore lose none of their quality. In the equipment connected, no analogue/digital
    conversion is necessary, which might also have lead to losses in quality.
    DVI signals can be also be reproduced by the HDMI connection using a DVI/HDMI
    adapter cable. This is possible because HDMI is based on DVI and is downwardly
    compatible. That means that the digital video signals are transmitted via HDMI
    - no audio signals are transmitted, though. In addition, both use the same copy
    protection method HDCP (High Definition Content Protection).
    Switch off the TV set/monitor with HDMI connection and
    recorder.

    HDMI operation
    Switch the TV set over to the HDMI AV input (takes place automatically in connection with a Loewe Flat-TV set, see page 16).
    Press the RES button on the recorder repeatedly to set the desired
    picture resolution (e.g. 576i, 576p, 720p, 1080i).

    ➠ You can only set resolutions which your TV set/monitor is
    capable of. For optimum picture quality, select the resolution
    1080i on the recorder.
    Open the disc drawer.
    Insert the selected disc in the drawer with the side to be played
    facing down.

    Connect recorder to TV set/monitor via HDMI connection as
    described on page 16.

    Close the drawer.
    Call main menu.

    Switch on the TV set/monitor.

    Log in the HDMI connection in the connection wizard of the TV
    set (see user guide TV set).

    34 Select FILM.
    56 Select HDD, HDD DivX or Disc.
    Confirm selection with OK.
    A menu appears on the screen.

    ➠ DVI: If a DVI-HDMI adapter cable is used for transmission,

    5 634Select title on DVD.

    Switch on the recorder after 30 seconds.

    connect the analog or digital audio outputs on the recorder
    with the corresponding inputs of the TV set as described on
    pages 16 and 19.
    Leave the existing SCART connection as it is to record from the TV.

    Depending on the medium, playing starts automatically or is
    started with the Play button or you have to make entries in the
    menu.

    ➠ The other sockets (S-Video and Component Video) have no function during
    the 720p or 1080i mode.

    ➠ If your TV set is unable to process a sampling frequency of 96kHz, set the
    sampling rate to 48 kHz in the Setup menu under “Sound” (page 29).
    If you have selected this option, the recorder will automatically convert all 96kHz
    signals to 48kHz-signals.

    ➠ This recorder performs no internal (2-channel) decoding of DTS soundtracks.
    In order to enjoy DTS multi-channel surround sound, this recorder must be
    connected by one of the digital audio outputs to a DTS-compatible receiver.

    ➠ If the “Dolby Digital” or “MPEG” option has not been set to “PCM” in the
    Sound menu (page 29), no sound is output through the TV set.

    ➠ The HDMI connection to the recorder is operated as a signal output. Please
    proceed as described on page 52 if you want to record from an external
    signal source with the recorder.

    37 -



  • Page 38

    Video mode
    Playing back a DVD or video CD
    Preparation
    Switch the television on and set the video source to be the input that the recorder
    has been connected to or activate the “Control voltage“ option for the television‘s
    AV input.

    General functions
    ➠ Unless otherwise indicated, the remote control (page 3) is able to control the
    functions described. The recorder‘s own controls can also be used to control
    certain functions (page 6).
    Select TITLE HDD DVD-ALL DivX

    ➠ This is unnecessary in Loewe Flat TV sets.
    If you have connected the recorder to an audio system, switch on the audio system
    and, as the source, set the input that the DVD recorder has been connected to.

    Twice to select the Title menu.
    DVD-Video
    � 4/14 �
    1/10
    5 6 Select
    symbol.
    0:12:34
    1.STEREO
    OFF
    34 Select1/1title number.
    NORMAL

    Open the disc drawer.
    Insert the selected disc in the drawer with the side to be played
    facing down.
    Close the drawer. READING shows on the display while disc
    recognition is in progress.
    Play
    After detection of the disc it starts playing automatically or a disc menu is displayed.
    Call main menu.

    OK start playing.
    Select CHAPTER / TRACK
    HDD DVD-ALL VCD

    34 Select FILM.
    56 Select HDD, HDD DivX or Disc.
    Confirm selection with OK.
    A menu (e.g. title list) appears on the screen.

    If a title has several chapters/tracks, you can select another
    chapter/track as follows:
    P+ or P- during playing to select the next chapter/next track or
    return to the beginning of the current chapter/track.

    5 634Select title on DVD.
    Start / continue playing.

    Search HDD DVD-ALL VCD DivX CD

    Select title on (S)VCD (with activated PBC, see page 34).

    Select the search direction and speed:

    The menu setting and the exact operating instructions for the
    disc may differ from disc to disc. Follow the instructions on the
    individual menu pages.

    Press several times for faster search in reverse.

    Pause: Pause playing.

    Speed and direction are shown as arrows.

    Stop: Finish playing.

    End search mode and continue playing.

    You will find further information on page 40.
    ➠ If the Lock System is active and the DVD disc‘s security rating is higher than
    that of the DVD Rating, the four-digit password will need to be entered (see
    DVD Rating on page 30).
    ➠ DVD‘s have a country code. The recorder will not play a disc that has a
    country code which differs from the country code stored in the unit. This
    player has country code 2.
    ➠ You can also switch off (OFF) PBC for (S)VCD (see page 34) in the main menu.
    - 38

    P- twice briefly to return to the previous chapter/track.

    Press several times for faster search forwards.

    Skip
    34 Jump back/forward 5 minutes during playing (HDD).
    Jump forward 15 seconds during playing (HDD, DVD±R,
    DVD±RW).



  • Page 39

    Video mode
    Freeze frame and picture for picture play-back
    HDD DVD-ALL VCD DivX
    Pause: Pause playing.
    34 Scroll picture by picture.
    Continue playing.
    ➠ The picture by picture scroll back is not supported by VideoCDs and in DivX. You can page forward through images by
    pressing PAUSE on the remote control.
    Slow Motion
    HDD DVD-ALL VCD
    Pause: Pause playing.
    Switch on slow motion mode during pause.
    Select the slow motion direction and speed:

    the current disc is displayed in the

    Enter time in format h:mm:ss.
    OK start playing from set time.
    Zoom HDD DVD-ALL VCD
    With the Zoom function you can enlarge the video picture during playback and
    navigate in the enlarged picture.

    1/16, 1/8, 1/4, 1/2 (forwards).

    Zoom stages: x1, x2, x4, x1 (normal size).

    End slow motion mode and continue playing.
    ➠ On Video-CD the slow motion play-back in reverse is not
    supported.
    Repeat HDD DVD-ALL VCD CD MP3
    DVD-Discs
    Select type of repetition.
    Repeats the position marked with OK.
    Repeats the current chapter.
    Repeats the current title.
    Repeats all titles on the disc (VR mode; only DVD-RW disc).
    No repeat.
    Video-CDs / DivX




    1/10
    0:12:34
    1.STEREO
    The elapsed
    OFFplaying time of
    “Time” box.1/1
    5 6NORMAL
    Select
    symbol.

    Select Zoom function during play/freeze frame.

    Slow motion speed and direction are displayed.

    A-B
    Chapter
    Title
    All
    Off

    � 4/14 �
    Press twice.

    1/16, 1/8, 1/4, 1/2 (reverse).

    1/8, 1/4, 1/2 (forwards / VCD).







    Time (Play from ...) HDD DVD-ALL DivX
    The “Time” functionDVD-Video
    enables you to select where a disc starts playing.

    Select type of repetition.
    Track Repeats the current track.
    All Repeats all tracks on the disc or in the folder (DivX).
    Off No repeat.

    3 4 5 6 Select picture section.
    Close Zoom window.
    ➠ The Zoom function may not work on certain DVDs.
    Markers HDD DVD-ALL VCD
    You can start playing from a saved marker. A maximum of six markers may be
    saved.
    Set Marker
    Press the blue button briefly to set a mark at a selected point.
    The marker symbol is displayed on the screen for a short time.
    HDD

    1/6

    Repeat this step to enter a maximum six markers on one disc.
    Call Marker
    Press the blue button long to select Marker Search menu.
    5 634 Select marked scene.
    OK Start playing from marked scene.

    ➠ On a Video-CD with PBC you have to set PBC to OFF in “Disc” menu of the main
    menu to use the repeat function. You will find further information on page 34.

    39 -



  • Page 40

    Video mode
    Camera positions DVD-V
    If the DVD contains scenes taken at different camera positions, it is possible to
    change to another camera position during play-back.

    Marker Search

    DVD-Video
    Select
    twice during play-back.
    � 4/14 �

    5 6 Select
    1/10

    Move

    OK

    Select

    MENU

    Delete

    END

    Close

    Delete Marker
    4:3

    Press the blue button long to select Marker Search menu.
    16 : 9

    5 634 Select marked scene.

    symbol.

    0:12:34
    3 4 Select the desired camera angle.
    1.STEREO
    current camera position is displayed.
    OFF
    1/1
    NORMAL

    ➠ A camera symbol will appear on the screen during scenes
    that were recorded using different camera positions.

    Digital sound formats, movie language and audio
    channels
    You can select the digital sound format in connection with the movie language
    here.

    Delete Marker.

    DVD-Video
    Select
    twice during play-back.

    34 Select yes option.

    1/10
    5 6 Select

    Confirm with OK.
    Exit the Marker Search menu.
    ➠ The markers are only saved until the disc is changed (DVD-ALL VCD).

    The number of the

    � 4/14 �

    0:12:34
    1.STEREO
    OFF
    3 4 Select
    1/1
    DivX).NORMAL

    symbol.

    other movie language or sound format (DVD-V

    Disc menu DVD-V VCD
    DVDs and Video CDs usually contain their own menus.

    3 4 Select other audio channel (STEREO, LEFT or RIGHT) (VCD
    Video VR).

    Select Disc menu.

    ➠ Some discs have got Dolby Digital and DTS sound tracks. If
    DTS is selected, there is no analogue audio output. To listen
    to the DTS sound track, connect the recorder via one of the
    digital outputs to a DTS amplifier (page 19).

    5 634 Select the desired settings.
    Confirm with OK.
    Exit Disc menu DVD.
    Exit Disc menu HDD.

    3D-Surround DVD-ALL VCD DivX
    DVD-Video
    This device can create
    a 3D surround effect which simulates a multi-channel audio
    � 4/14 �
    reproduction with two conventional
    stereo speakers.
    1/10

    0:12:34during play-back.
    Select twice
    1.STEREO

    5 6 Select
    OFF

    symbol.

    1/1
    NORMAL

    3 4 Select 3D SUR. for surround sound.
    3 4 NORMAL to end surround sound.

    - 40



  • Page 41

    Video mode
    Subtitles DVD-ALL
    DivX
    DVD-Video

    � 4/14during

    Select twice
    play-back.
    1/10

    0:12:34
    5 6 Select

    symbol.

    1.STEREO
    OFF
    1/1
    3 4NORMAL
    Select the desired subtitle language.

    PIP (Picture In Picture)
    HDD DVD-ALL
    This function enables you to watch TV stations or videos from other connected AV
    sources whilst playing the video.

    Playing memory media with mixed
    contents
    If the memory media contain files of different playing formats such as MP3, JPG
    and DivX, you can switch between the three play modes MOVIE, PHOTO and
    MUSIC with the button
    in the main menu (page 23):
    ➠ For operation of the MOVIE mode, see chapter “DivX mode” on page 42 (not
    for USB memory media).
    ➠ For operation of the MUSIC mode, see chapter “Audio mode” on page 43.

    Start play-back.
    Switch on small picture.

    ➠ For operation of the PHOTO mode, see chapter “Photo mode” on page 46.

    Storing the last disc settings
    DVD-V Video VR
    The recorder saves the user settings for the last disc that you have watched. The
    settings are saved until you remove the disc from the recorder.
    If you insert a disc that has already been played back, playback will continue from
    the last stopping point.

    Select station for small picture in TV mode.
    Select signal source for the small picture in the order Tuner, AV1,
    AV2, AV3, Tuner.
    End play-back and PIP. Transfer small picture to large picture.
    3 4 Select desired small picture position.
    Yellow button – Select Zoom function for the small picture.
    Three different sizes are available.
    Switch off small picture.

    41 -



  • Page 42

    DivX mode
    You can play DivX files saved on the harddisc or disc media with this recorder. Movies
    can only be saved on USB memory media.
    ➠ Before playing DivX files, please read the notes “About DivX Video files” on
    this page.

    Playing DivX files

    P+ or P- during play-back to select the next title or return to the
    beginning of the current title.
    P- twice briefly to return to the previous title.
    Finish playing.

    Open the disc drawer.

    Show detailed information.

    Insert the selected disc in the drawer with the side to be played
    facing down.

    Exit DivX menu.
    See page 38 onwards for other operating func tions.

    Close the drawer. The disc is read.
    Call main menu.

    DivX subtitles

    34 Select MOVIE.
    56Call HDD DivX or DISC.
    Confirm selection with OK. The Movie List menu appears on
    the screen.

    For subtitles to be displayed correctly press MENU – LANGUAGE – DivX Subtitles
    and select the desired subtitle language.
    Alternatively, press the red button
    for 2 seconds during the DivX
    playback and then select the desired character set with 34.
    The subtitles function can be switched on and off like on DVD-Video (page 41).

    About DivX Video files

    Movie List
    Movie
    Clip1.avi

    HDD

    2 Item(s)

    Clipl2.avi

    New Album
    OK

    Select

    INFO

    Info

    MARKER

    Mark

    5 6 Select title or folder.
    OK show menu options for file.
    5 6 Select option.
    Confirm with OK.
    New Album Create new folder.

    Play Starts playing the selected file.

    Copy Copy files to folder or data medium (page 44).

    Move Move files to folder or data medium (page 44).

    Open Open folder and show contents.

    Delete Delete selected title/folder.

    Rename Change file / folder name.

    - 42

    Start play-back.

    END

    Close

    This recorder is compatible with the following DivX formats:
    • The maximum picture resolution of the DivX file is less than or equal 720 x
    576 (H x V) pixels.
    • The filename of the DivX file has a maximum of 47 characters.
    • Characters in DivX filenames which cannot be displayed are shown as “_”.
    • The unit can not correctly play image refresh rates of > 30 images per second.
    • If the sound and picture are out of sync, either the sound or the picture is
    played.
    • This recorder does not support the “GMC” and “QPEL” DivX/Xvid function.
    • Valid DivX file extensions for videos are: “.avi”, “.divx”.
    • Valid DivX file extensions for subtitles are: “.smi”, “.srt”, “.sub” (only Micro
    DVD, Subviewer 1-2 formats), “.txt” (only Micro DVD, T1-4 formats). Other
    subtitles cannot be displayed.
    • Valid DivX Codec formats: “DivX3.xx”, “DivX4. xx”, “DivX5.xx”, “XVID”,
    “3IVX”.
    • Valid DivX Audio formats: “Dolby Digital” (AC3), “PCM”, “MP2”, “MP3”, “DTS
    (only at DIGITAL OUT)”, “WMA”.
    • MP3 sampling rates: 8 - 48 kHz.
    • WMA sampling rates: 32 - 48 kHz.
    • MP3 bit rates: 32 - 320 kbps.
    • WMA bit rates: 32 - 192 kbps.



  • Page 43

    Audio mode
    Playing titles on Audio CD or MP3/WMA media
    Audio CDs can be played with the recorder. Recordings in MP3/WMA format can
    also be played from HDD, memory card, CD-ROM, CD-R or CD-RW discs (read
    the instructions for MP3/WMA recordings on page 44 before playing MP3/WMA
    recordings).

    Change between program and original list.
    Display detailed information (only MP3/WMA).
    Finish playing.
    Options in the music menus

    Open the disc drawer.

    5 6 Select title or folder.

    Insert the selected disc in the drawer with the side to be played
    facing down.

    5 6 Select option.

    Call main menu.

    Confirm with OK.

    34 Select MUSIC.
    56Call HDD DivX, DISC or USB.
    Confirm selection with OK. The Music List menu appears on
    the screen.
    AUDIO CD menu

    Music List
    Audio CD
    55:02:45

    OK

    MP3/WMA menu

    OK display menu options.

    Close the drawer. The disc is read.

    Select

    Track List
    TRACK 1
    TRACK 2
    TRACK 3
    TRACK 4
    TRACK 5
    MARKER

    Mark

    Duration
    0:04:12
    0:03:45
    0:02:15
    0:03:22
    0.04:15
    TEXT

    Prog.-List

    END

    New album

    Play

    Random
    Program add

    Copy

    Move

    Open

    Delete

    Rename

    Create new folder.
    Starts playing the selected tracks/files.
    Random play-back order of the tracks/files.
    Inserts track/file in the program list (page 45).
    Copy files to folder or data medium (page 44).
    Move files to folder or data medium (page 44).
    Open folder and show contents.
    Deletes selected title/folder.
    Change file/folder name.

    Pause
    Pause playing.
    Continue playing.

    Close

    Play another title
    P+ or P- during play-back to select the next title or return to the
    beginning of the current title.

    Music List
    CD
    Play
    Random
    Copy
    Program add
    OK Select

    TITLE1.mp3
    MP3

    P- twice briefly to return to the previous title.

    TITLE.mp3
    TITLE2.mp3
    TITLE3.mp3
    TITLE4.mp3
    MARKER

    Mark

    Enter the track number of the desired title directly with an AudioCD.
    Search CD
    TEXT

    Prog. List

    END

    Close

    5 6 Select title.
    Start Play.
    The elapsed playing time of the current track/current file is
    displayed on the left.
    Playing stops automatically at the end of the disc/list.

    Switch on seek mode during play-back.
    Select the search direction and speed:
    x2, x4, x8 (reverse).
    x2, x4, x8 (forwards).
    Search speed and direction are displayed.
    End search mode and continue playing.
    43 -



  • Page 44

    Audio mode
    Random play
    5 6 Select title or folder.
    OK display menu options.

    Copy/move files/folders
    Files and folders can be copied or moved to other data media depending on the
    medium.

    5 6 Select Random.

    ➠ Switch off the memory card’s write protection if necessary.

    Confirm with OK. The random play-back starts and the symbol
    is displayed:
    .

    ➠ Check whether the memory medium has enough free capacity.

    Skip the current title with P+.
    Hints for MP3/WMA recordings
    • Sampling rates: MP3: 8 - 48 kHz; WMA: 24 - 48 kHz.
    • MP3 bit rates: 32 - 320 kbps.
    • WMA bit rates: 32 - 192kbps.
    • An MP3 file consists of audio data compressed with the MPEG1 Audio Layer-3
    file coding.
    • A WMA file (Windows Media Audio) consists of data which have been compressed with the Windows Media Codec.
    • The filenames must have the extension “.mp3” or “.wma”.
    • This unit cannot play back any DRM-protected contents.

    5 6 Select file or folder.
    Confirm with OK. Display menu options.
    5 6 Select Edit.
    4 Call second level.
    5 6 Select Copy / Move.
    Confirm with OK.
    The Copy or Move menu appears.
    Copy
    Select the Media
    HDD
    USB

    Compatibility of MP3 discs
    • The physical format of the CD-R must conform to ISO 9660 and JOLIET.
    • The physical format of the DVD+R/RW must correspond to ISO 9660 (UDF
    Bridge-Format).
    • The total number of files in a folder on the disc may not exceed 1999.
    ➠ Please note that permission is required for downloading MP3/WMA files and
    music from the Internet. The required permission must be obtained from the
    respective copyright owners or their representatives.

    Copy
    Cancel
    New Album

    5 6 Select the folder.
    or create a new folder with New Album.
    4 5 6 Select Copy / Move.
    Confirm with OK.
    The selected files / folders are copied to the memory medium
    into the selected folder.
    Cancel returns to the start menu.

    - 44



  • Page 45

    Audio mode
    Program list

    Options in the menu Program List

    With the program list you can put together your favorite titles on a memory medium
    in any order for your individual program. This list may contain 99 titles (Audio
    CD) or 256 titles (MP3/WMA). Program lists can be saved permanently, renamed,
    deleted and loaded as often as you like.
    5 6 Select title or folder.
    Mark title or folder. A symbol (✓) appears in front of the title/
    folder. Repeated pressing marks other titles/folders.
    ➠ If a folder is selected, all the files in it are added to the program list.
    Music List
    HDD

    New Album
    OK

    Select

    TITLE1.mp3

    TITLE1.mp3
    TITLE2.mp3
    TITLE3.mp3
    TITLE4.mp3
    MARKER

    Mark

    Repeat programmed tracks/files
    Select type of repetition during play-back.
    TRACK Repeats the current title.
    FOLDER (MP3/WMA) repeats all files in the currents folder.

    5 6 Select title.
    TEXT

    Prog.-List

    END

    Close

    Mark title. A symbol (✓) appears in front of the title.
    OK display menu options.
    5 6 Select Delete.
    Confirm with OK.

    34 Change to program list.

    Change track/file order in the program list
    5 6 Select title to be moved.

    Music List

    Select

    Create new folder.
    Starts playing the titles in the programmed order.
    Random play-back order of the titles.
    Deletes selected title/folder.
    Move order of the selected title in the program list.
    Inserts track/file in the program list.

    Delete title from the program list

    Confirm with OK.

    OK

    New album

    Play

    Random

    Delete

    Move
    Program add





    Music

    5 6 Select Program add to add title to program list.

    New Album

    OK display menu options.

    3 Item(s)

    OK display menu options.

    HDD

    5 6 Select title or folder.

    TITLE1.mp3
    Music
    TITLE1.mp3
    TITLE2.mp3
    TITLE3.mp3
    TITLE4.mp3
    MARKER

    Mark

    Mark title. A symbol (✓) appears in front of the title.

    Program list
    TITLE1.mp3
    TITLE2.mp3
    TITLE3.mp3

    OK display menu options.
    5 6Select Move. A blue bar appears in the program list.
    5 6 Move bar to desired position.

    TEXT

    Prog.-List

    END

    Close

    OK perform movement.

    5 6 Select first title of the program.
    or OK start playing in the programmed order.
    Change between program and original list.

    45 -



  • Page 46

    Photo mode
    Show photos
    The recorder can display JPEG files under the following conditions. The maximum
    size of a JPEG file may not exceed 4 MB. The total number of files and folders is
    1999. The file extension must be “.jpg”. The progressive and loss-free compression
    of JPEG files is not supported.
    Call main menu.

    Slide Show
    5 6 Select Slide Show option in the Photo List menu.
    Confirm with OK. The Slide Show menu appears.
    Slide Show
    Pictures

    34 Select PHOTO.
    56 Select HDD / Disc / USB.
    Confirm selection with OK.
    The Photo List menu appears on the screen.

    Speed

    Start
    JPG\


    Pictures


    Speed
    Simultaneous Music

    New Album
    Select

    MARKER

    Mark

    END

    Display Selected files  or
    All files.
    Speed of the slide show: Slow, Normal or Fast.
    Background music selectable from HDD.

    Slide Show
    Select music

    Close

    5 634 Select desired photo.

    Select All
    TITLE1.mp3

    OK display options.

    TITLE2.mp3

    5 6 Select Full Screen.

    TITLE3.mp3
    TITLE5.mp3

    ➠ If the thumbnail is displayed in black, this JPEG file cannot
    be displayed.

    Exit photo display, return to Photo List menu.
    Options in the “Photo List” menu
    New Album Create new folder.

    Open Open folder and show contents.
    Full Screen Show photo.

    Delete Delete file(s)/folder.
    Slide Show Automatically running photo sequence.

    Rename Change file/folder name.

    Move Move files to folder or data medium (page 44).

    Copy Copy files to folder or data medium (page 44).

    - 46

    Start
    Cancel
    MARKER

    OK hide / show menu bar.
    5 6 Rotate photo 90° to left / right.

    Deselect All

    TITLE4.mp3

    Confirm with OK. The photo is displayed.

    Go to previous / next photo with P- / P+.

    Cancel

    5 634 Select options and confirm with OK.

    1/15

    Picture1.jpg

    OK

    Normal

    Simultaneous Music play

    Photo List
    HDD

    All

    Mark

    You can put together the slide show and simultaneous music individually by
    selecting individual files with the MARKER
    button.


    5 634 Select Start button.
    OK start slide show.
    Stop slide show.
    Continue slide show.
    End slide show, return to menu Photo List.



  • Page 47

    USB mode
    About the system

    Plugging in the USB memory medium

    You can play MP3/WMA audio files or show pictures in JPEG format which are
    stored on a USB stick or a memory card in a USB card reader. You can operate
    the USB card reader with the remote control of the Loewe recorder.
    The memory medium must be formatted in FAT 16 or 32 format. Memory cards
    with other formats cannot be read.
    ➠ Keep memory media out of reach of children. See a doctor immediately in
    case of swallowing.
    ➠ The reading time of the connected memory medium depends on its performance capacity, the number of files, the file size or resolution.
    ➠ The front flap of the recorder cannot be closed while a memory medium is
    plugged into the USB socket.
    ➠ This device is compatible with Flash-USB memory media which support USB 1.1.
    ➠ Certain USB memory media may not be supported by this device.
    ➠ Never remove the USB memory medium during access (e.g. playback). This
    can lead to malfunctioning of the device.


    Open the front flap.
    Plug the USB memory medium into the USB socket. Make sure the
    USB plug is the right way round.
    Video mode
    See “Video mode” on page 38 for operation.
    Audio mode
    See “Audio mode” on page 43 for operation.
    Photo mode
    See “Photo mode” on page 46 for operation.

    47 -



  • Page 48

    Remote control Assist – USB operation

    Loewe TV: Sound off/on
    LED indicator for current operating mode
    Switch over to operate TV set
    (page 20)........................ Switch over to operate Recorder
    *
    *

    Switch on/off - on stand by................................(page 20)

    Loewe TV: Radio Digitall; long: Auro Radio
    Switch over to operate DVD-Player
    Loewe TV: Sound menu

    *

    *
    *
    (pahe 45)....................................................... Program list
    (page 23)...................................................“Set-up” menu
    Loewe TV volume

    *
    “Home” menu....................................................(page 23)
    Show detailed information.................................(page 42)
    MENU: Close menu
    elect previous / next file
    MENU: select / adjust

    MENU: confirm the menu selection

    (page 39)............................................................... Repeat
    *
    PLAY: Reverse search

    *
    Highlight selection........................................... (pages 39)
    Playback
    PLAY: Search forward

    *
    Pause
    - 48

    Stop
    * no function in this operating mode



  • Page 49

    Recording
    Recordings on the HDD

    Clip recording
    A program can be saved permanently on the HDD during the Timeshift display.

    Recordings on the internal hard disc (HDD) of the recorder are similar to recording
    in the VR mode on DVD-RW discs. Ten genres can be assigned to the recordings
    for easier management (see “Title Name”, page 58).

    Search for the starting point with single frame, search and
    slow motion (page 38).
    Press at the starting point of the clip to be recorded.

    ➠ The maximum number of titles on the HDD is 255.

    CLIPREC
    10:26

    Delayed TV viewing – Timeshift mode

    11:26

    You can interrupt a TV program at any time and continue watching it later with
    a timeshift.

    The progress of the recording is shown red in the progress
    display.

    Set the recorder to the desired signal source as described under
    “Manual Record” (page 50).

    Search for the end point with single frame, seek and slow
    motion.
    Press at the end point of the clip to be recorded.

    ➠ The timeshift operation only starts when the TV option is set
    to TV HDD in the main menu (page 23).

    Playing continues. Repeat the procedure for other clips if
    necessary.

    ➠ You can switch timeshift mode on or off permanently in the
    Record menu (page 32).
    Start recording with TIMESHIFT (the T/S HDD display lights up
    in the display window of the DVD recorder).
    1 SYNCPLAY I
    10:26

    2

    11:26

    3

    4

    ➠ The display for Clip recording disappears after 10 seconds. A symbol appears
    for this in the bottom left of the screen:
    ➠ Only the sequences selected by clip recording are saved permanently on the HDD.
    5

    ➠ Clip recordings are not possible for sequences shorter than five seconds.
    Jump to start or end during Timeshift

    1 Status display for play mode.
    2 Timeshift start time.
    3 Already elapsed Timeshift time.
    4 Current Timeshift time.
    5 Timeshift start time plus one hour.

    The display appears.

    Interrupt recording. Press

    4 Start playing from Timeshift end point.

    PLAY
    10:26

    3 Start playing from Timeshift starting point.

    to continue.

    Switch Timeshift display on / off.

    34 Jump back/forward 5 minutes during playing.

    ➠ The display for Timeshift disappears after 10 seconds. A symbol appears for
    this in the bottom left of the screen:
    The display can be called again with

    11:26

    .

    Markers in Timeshift
    A marker can be set in Timeshift mode.
    Press the blue button briefly to set a mark at a selected point.

    Jump forward 15 seconds during playing.
    Exit Timeshift
    End recording (only in manual timeshift mode).
    A confirmation message is displayed.
    34 Select yes.
    Confirm with OK. The current TV program is displayed.

    Press the blue button long to select the marked scene.
    Exit display.

    49 -



  • Page 50

    Recording
    Simultaneous record and display
    Playing another medium during recording
    Play and record take place independently of each other for DVDs and the integrated
    HDD. For example, you can record on a DVD or the HDD and at the same time
    play a movie, photos or music from the respective other memory medium (except
    Timeshift, DivX).
    Start recording.
    Call main menu.
    34 Select MOVIE, PHOTO, MUSIC.
    56 Select desired memory medium.
    Confirm selection with OK.
    Start play-back.
    The recording is continued during play-back from the other data
    medium.
    Finish playing.
    Open main menu and select memory medium for recording
    under TV.
    End recording.
    ➠ Some functions (e.g. simultaneous play and recording when
    dubbing) are not possible.
    Time Slip
    HDD
    Time Slip enables delayed playing of the title while it is being recorded.

    Proceed as described in the following points in order to carry out video recordings
    from integrated tuners.
    Switch on the recorder. Insert a rewritable disc for DVD recordings. A new disc is initialised by the recorder (on request) when
    inserted (page 33).
    If required, select Rec mode Set (page 32)
    Call main menu.
    34 Select TV.
    56Call TV HDD or TV DVD.
    Confirm selection with OK. A status information to the selected
    memory medium is displayed briefly.
    Switch the recorder input to the signal source you wish to record
    from with the number buttons, the P+ / P- buttons or the 0 AV
    button. The station number, name and current sound status are
    displayed on the screen.
    Then select the sound channel (“TV Audio” page 32).
    Start recording. (REC lights up in the display window of the
    recorder). The recording starts immediately and continues until
    the disc is full or you interrupt the recording.
    00:08:21
    HDD

    20M Rec
    80H 19M Free

    Start play-back.

    During recording. Show remaining recording time. By pressing
    the button again the maximum recording time is limited to a
    fixed period of time. Every additional press of a button extends
    the recording time by 10 – 30 minutes to a maximum 4 hours.

    Playing starts whilst recording continues.

    Interrupt recording. Press again to continue.

    34 You can navigate during play-back with single frame, seek
    and slow motion.

    Show status of recording.

    Start recording.

    Finish playing ...
    and show current recording position.
    ➠ Playing can start at the earliest 15 seconds after starting the
    recording.

    - 50

    Manual Record

    End recording.
    ➠ If the recorder is disconnected from the mains during recording (or in the
    event of a power failure), the entire recording will be lost.



  • Page 51

    Recording
    Timer Recording

    ➠ The recorder must be in standby mode for timer recording to start automatically.

    This recorder can be programmed to record up to 16 programs within one month.
    For programmed recordings the timer must be informed which signal sources
    (TV stations or from AV devices) are to be recorded and the respective start and
    stop time.

    ➠ Please note that not every station operates with VPS/PDC.

    Switch on the recorder. Insert a rewritable disc for DVD recordings.

    ➠ The current time and the current date must be set in the recorder (page 27).

    Call the Timer Record List menu.

    ➠ Select the audio channel for two-language TV recordings in the “TV Rec Audio”
    menu (page 32).

    5 6 Select the NEW option and confirm with OK.
    The Timer-Record menu appears.
    Timer Record
    Media PR
    HDD

    S23 K1

    Media
    CH/PR
    Date
    Start time
    End time
    Repeat
    VPS/PDC

    SQ 80H 9M Free

    Date StartTime EndTime

    31 8/12 Fr

    REC-MENU









    ➠ The starting time for the recording must be at least 3 minutes into the future.
    The recorder switches on about 2 minutes before the programmed time and
    runs up to about 2 minutes after the programmed time.

    20:15

    22:00

    Repeat

    VPS/
    PDC

    Once

    Off

    Duration : 105 M

    Timer Record List

    OK

    Enter

    END

    Close

    Select the memory medium for the recording.
    Select the stations or an external input.
    Select the data up to one month in advance.
    Defines the start time for the recording.
    Defines the end of the recording.
    Select repetition (once, daily (Mo-Fr), weekly).
    (only analogue TV) The VPS/PDC system adapts the recording
    time automatically to changes in the program start time for
    recordings via the integrated tuner. Set the VPS/PDC time
    and the date of the program you want to record. You will find
    these in your TV guide or in the teletext.
    Enter the necessary information for your timer recording(s).
    3 4 Move the cursor to the previous / next column.
    5 6 Edit the setting at the current cursor position.
    OK saves timer data.
    Exit Timer Record menu without saving.
    Call Timer Record List menu.

    Timer recordings with the ShowView®
    system
    This set makes programming timer recordings (analogue TV only) child’s play. Many
    TV program guides publish the ShowView number for the TV programs. So when
    you want to make a timer recording of a programme, you only need to key in the
    appropriate ShowView code number. You can specify the recording quality to the
    recorder optionally and determine whether it is a single or a repeated recording.
    You can save a maximum 16 timer programs on the recorder.
    Select ShowView menu with the green button.
    ShowView
    Number

    0-9 Input

    OK

    Enter

    MENU

    Delete

    END

    Close

    Enter the ShowView number.
    Delete input errors.
    Confirm with OK. The Timer Record menu appears.
    Check and, if necessary, correct the settings as described under
    “Timer Recording” (this page).
    ➠ The ShowView function is only possible for recordings made with the integrated analogue receiver (tuner) of the recorder. This function is not possible
    when recording from an external source (e.g. from a connected SAT receiver).

    Switch recorder to standby.
    The timer symbol appears in the TV display (page 7).

    51 -



  • Page 52

    Recording
    Timer Record List

    Record from external sources
    You can record from an external source ( e.g. SAT-TV set, SAT receiver, camcorder
    or video recorder).

    Checking the timer programming
    Call the Timer Record List menu.

    The device you want to record from must be connected to the
    recorder properly. You will find further information on page 16.

    Timer Record List
    CH/PR
    RTL

    REC-MENU

    Date StartTime Duration Mode
    New
    8/12 Wed 20:15
    105min SQ

    Timer Record

    MENU

    Delete

    OK

    Edit

    Switch on the recorder and set the TV HDD or TV DVD option in
    the main menu (page 23).

    Check
    Rec. OK

    END

    Close

    Editing a timer programming
    5 6 Select timer recording.
    OK edit selected programming (page 51).
    Delete selected programming.
    or New opens “Timer Record” menu (page 51).
    Recording conditions
    With the programmed timer the recorder does not record under the following
    conditions:
    • No disc or a non-rewritable disc inserted. The recording is then made on the HDD.
    • The power supply is interrupted or the recorder is not ready.
    • There are already 99 (255 HDD) recorded titles on the disc.
    • The starting time for the recording is less than three minutes into the future.
    You cannot program the timer under the following circumstances:
    • A recording is already in progress.
    • 16 timer recordings have already been programmed.
    Multiple overlapping timer programs:
    • The earlier recording takes priority.
    • When the earlier recording ends, the later one will start.
    ➠ If the disc is damaged, it is possible that the recording will not be done
    properly. Even if the “Rec. OK” message appears in the “Check“ field, this is
    not necessarily true in this case.

    - 52

    Insert a rewritable disc for DVD recordings.

     : VPS/PDC On







    AV1
    AV2
    AV3
    DV
    PR-nn

    Select source.
    AV1 to the rear of the housing.
    AV2 DECODER to the rear of the housing.
    AUDIO L/R IN to the front of the housing.
    DV IN to the front of the housing.
    Integrated tuner on station nn.
    Set the recording quality (page 32).
    For further operation see “Manual Record” on page 50 or “Timer
    Recording“ on page 51.

    ➠ If you operate this recorder with a Loewe Flat-TV set, the recording wizard of
    the TV set controls the recording via Digital Link Plus. This has the advantages of easier operation, especially when recording digital stations. You will
    find further information in the TV user guide under “Operation of additional
    equipment – Timer recordings”.
    ➠ If your source is copy-protected by Copy-Guard, you cannot use this recorder
    to record from it. Read the copyright notes on page 14.



  • Page 53

    Recording
    Digital Video
    General “DV“ information
    With DV (Digital Video, also known as i.LINK), you can use a DV cable as the audio,
    video, data and control signals input / output to connect a camcorder that has DV to
    this recorder. The i.LINK interface complies with the IEEE 1394-1995 standard.
    “i.LINK” and the “i.LINK” logo are trademarks.
    • This recorder is only compatible with “DV 25“ format camcorders. Digital satellite tuners and digital VHS video recorders are not compatible.
    • You cannot connect more than one DV cam-corder at a time to this recorder.
    • You cannot control this recorder with external devices that are connected via
    the DV IN socket (incl. two Recorders).
    • The camcorder connected via the DV IN socket cannot necessarily, in every
    case, be controlled.
    • Digital camcorders can usually record audio as 16 bit/48 kHz stereo or twin
    stereo tracks with 12 bit/32 kHz. This recorder can only record one stereo audio
    track. Set “DV Rec Audio“ as required or Audio 1 or Audio 2 (page 32).
    • The sampling rate of the digital sound input to the DV IN socket must be either
    32 or 48 kHz (not 44.1 kHz).
    • Recording may suffer from interference if the camcorder stops playing back, if a
    part of the tape that has not been recorded on is played back, if the electricity
    supply to the camcorder is cut off, or if the DV cable comes out.
    Troubleshooting
    If you are not receiving images and/or sound via the DV IN socket, check the
    following:
    • The DV cable must be properly connected.
    • Switch off the camcorder that is connected, and switch it back on.
    • Tune the audio input in to the recorder.

    Recording from a digital camcorder
    You can record from a camcorder that is connected to the DV IN socket in the
    recorder‘s front panel. You can use the recorder‘s remote to control a cam-corder
    and the recorder. Before recording, make sure that the audio input has been set
    up for the DV IN socket (page 32).
    The digital camcorder must be connected to the DV IN socket at
    the front of the housing. Further information can be found on
    page 20.
    You can choose from between Audio 1 (original audio) and Audio
    2 (overdubbed audio).
    The DV input is set using the “DV Rec Audio“ submenu of the
    main menu (page 32).
    Select DV input.
    “DV” is displayed in the display window of the recorder and on
    the screen.
    Search the position on the camcorder tape from which you want
    to record.
    For optimum results, interrupt play-back of the camcorder at the
    point from which you want to record. Depending on the
    camcorder you can operate the functions STOP, PLAY and PAUSE
    with this recorder.
    Start recording.
    The recording is stopped automatically when the recorder detects
    no signal.
    Interrupt recording. Press again to continue.
    End recording.
    ➠ You cannot use the recorder to control the camcorder while recording is in
    progress.
    ➠ In Video mode, the last frame of the recording is shown on the screen for a
    short time after recording has ended.
    ➠ For timer recordings to work properly on this recorder, the digital camcorder
    should be switched on and operational.

    53 -



  • Page 54

    Edit recordings
    4

    Menu Title List and Chapter List
    Under the Title List menu, video contents on unfinalised DVDs in VR mode and
    video contents on the internal HDD can be edited. The available edit functions
    are dependent on whether video on a DVD in VR mode or on the HDD or whether
    original contents or playlists are edited.
    DVD-RW discs in VR-mode can be edited in two ways. Original contents of the disc
    can be edited directly or a playlist can be created and edited. The playlist does not
    change the contents of the disc but controls its play-back.
    The editing of recordings on the HDD is the same as editing of original contents
    of a DVD-RW in the VR mode. Similar commands for deleting and naming titles as
    well as a fine setting of the chapter contents within the titles are available.
    ➠ If the Title List menu of the HDD is displayed during recording, some titles
    may have a marker. These titles have been recorded with a different input
    setting to the current recorder setting. These titles cannot be played during
    the recording.
    Pause playing.
    Select Title List menu.
    5634 Select title.
    Change between Original and Playlist menu when editing in DVD
    VR mode.
    The available options are displayed at the left. The titles (or chapters) on the DVD or HDD are displayed on the right of the screen.
    The thumbnails can be edited. (See “Change title thumbnail” on
    page 47).
    Information about the selected title in the Title List menu.
    Close menu.

    5

    6

    Title List

    3
    2
    1

    1/9

    HDD
    SQ 1Std 25Min
    Free
    Play
    Search
    >
    Delete
    Rename
    Edit
    >
    Sort
    >
    Dubbing
    OK Select

    TITEL 1
    21.11. 0:25:30

    TITLE 4
    24.11. 0:12:55
    INFO

    Info

    TITLE 2
    22.11. 0:33:12

    TITLE 3
    23.11. 0:45:00

    TITLE 5
    24.11. 0:05:00

    TITLE 6
    28.11. 0:08:42

    MARKER

    Mark

    END

    Close

    1. Different menu options are displayed depending on the memory medium.
    4:3

    Combine Connects two titles or chapters as one (page 59).

    Delete Deletes the title or the chapter (page 57).
    16 : 9
    Delete part Deletes part of the title (page 57).

    Divide Divides a title into two (page 60).

    Dubbing Copies the title to another data medium (page 63).

    Full Play Starts playing the selected title including hidden chapters.

    Hide Hides (shows) the selected title or the chapter (page 61).

    Move Moves a chapter in the Chapter List / Playlist menu to another
    position (page 61).

    Play Starts playing the selected title or chapter. Hidden titles and
    chapters on the DVD+R/RW are not played.
    Playlist Add Adds the title or chapter to a new playlist (page 55).

    Protect Prevents accidental recording, editing or deleting of a title
    (page 61).
    Title Name / Edits the title name; assignment to genre (page 58).

    Rename
    Search Chapter Display Chapter List of title (page 58).
    Search Time Time at which title starts playing (page 58).

    Sort Sorts the title list according to date, title or genre (page 59).

    Title Displays the title list of the chapter.
    . Displays the recording quality, free memory space and a progress display of
    the elapsed playing time.
    . Name of the current memory medium.
    4. Currently selected title.
    5. Thumbnail.
    6. Shows the title name, the recording date and the length of the recording.

    - 54



  • Page 55

    Edit recordings
    Edit Original and Playlist

    Create new Playlist

    Title, Chapter and Parts
    Titles of the original content of the disc contain one or more chapters. When inserting a title in the playlist, all the chapters within this title also appear. That means
    that chapters in the playlist behave exactly the same as chapters on a DVD-Video
    disc. Parts are sequences of the original or playlist titles. Parts can be added to or
    deleted from the Original and Playlist menu. When adding a chapter or title to the
    Playlist, a new title is created consisting of a sequence (= chapter) of an original
    title. When deleting, part of the title of the Original or Playlist menu is deleted.

    -RW VR
    Use this function to add an original title or a chapter to the playlist. The whole title
    is added to the playlist (you can delete parts you will not need later; see “Delete
    title/chapter from Original/Playlist” on page 57).
    The title appears in the playlist together with the chapter markers of the original.
    When adding other chapter markers to the original later, however, these are not
    copied automatically to the titles of the playlist. You can add a maximum 999
    chapters to a disc. To add only one chapter of a title, read “Add title/chapter to
    Playlist” on page 56.

    ➠ If you use the Delete, Edit and Move functions, the start and end frames may
    not correspond exactly with the start and end points. A short pause may be
    made between edits during play-back of the playlist. This is not a malfunction.
    Original and Playlist
    -RW VR
    The terms Original and Playlist are used in this user guide for the actual contents
    and the edited contents.

    Original The contents of the actual recordings on the disc.

    Playlist On DVDs a “Playlist” of the contents to be played and the
    play times is created for editing. The recorder plays the disc
    according to the playlist.

    Add chapter markers
    HDD -RW VR +RW +R
    Chapters can be created by inserting chapter markers at the desired positions
    within a title.

    Select Title List/Chapter List Original menu.
    5634 Select title/chapter.
    Confirm with OK.
    The available options are displayed at the left.
    Title List - Original

    1/9

    DVD-RW
    SQ 1Std 25Min
    Free

    Play
    Search
    Delete
    Protect
    Edit
    Playlist Add
    Dubbing
    OK Seelct

    >
    >
    >

    TITEL 1
    21.11. 0:25:30

    TITLE 4
    24.11. 0:12:55
    INFO

    Info

    C-SET During recording or playing at the position at which a
    new chapter is to be inserted.

    56 Select Playlist Add.

    A chapter marker symbol appears on the screen.

    Select playlist or add new one.

    ➠ Chapter markers are inserted automatically at regular intervals. You can change these intervals in the “Recording” menu
    (see “Auto Chapter” on page 32).

    Confirm with OK.

    TITLE 2
    22.11. 0:33:12

    TITLE 3
    23.11. 0:45:00

    TITLE 5
    24.11. 0:05:00

    TITLE 6
    28.11. 0:08:42

    TEXT

    Playlist

    END

    Close

    4:3
    16 : 9

    55 -



  • Page 56

    Edit recordings
    1/9

    Title List - Original
    DVD-RW
    SQ 1Std 25Min
    Free
    Play
    Search
    >
    Delete
    Protect
    Edit
    >
    Playlist Add
    >
    Dubbing
    OK Select

    DVD-RW

    Select Playlist
    TITLE
    1 PlaylistTITLE 2
    New
    21.11. 0:25:30
    22.11. 0:33:12

    TITLE 3
    23.11. 0:45:00

    TITLE 4
    24.11. 0:12:55

    TITLE 6
    28.11. 0:08:42

    INFO

    Info

    TITLE 5
    24.11. 0:05:00
    TEXT

    Playlist

    END

    SQ 1Std 25Min
    Free
    Play
    Search
    >
    Delete
    Protect
    Edit
    >
    Playlist Add
    >
    Dubbing
    OK Select

    Close

    TITLE 1
    21.11. 0:25:30

    TITLE 2
    22.11. 0:33:12

    TITLE 3
    23.11. 0:45:00

    TITLE 4
    24.11. 0:12:55

    TITLE 5
    24.11. 0:05:00

    TITLE 6
    28.11. 0:08:42

    INFO

    Info

    56 Select New Playlist.

    56 Select Playlist Add.

    Confirm with OK.

    Confirm with OK.

    The new title appears in the updated Playlist. All chapters of the
    title are added to the Playlist.

    DVD-RW

    Play
    Search
    Delete
    Title Name
    Delete Part
    OK

    TITLE 1
    21/11
    0:25:30

    >

    Select

    INFO

    Info

    TEXT

    Original

    Add title/chapter to the Playlist

    END

    Close

    4:3

    -RW VR
    16 : 9
    You can add an original title or a chapter to a Playlist title even if it is already
    registered.
    5634 Select a title/chapter in the Title List Original or
    Chapter List Original menu which is to be inserted in the Playlist.

    TEXT

    Playlist

    END

    Close

    1/9

    Title List - Original
    DVD-RW

    1/1

    Titlelist - Playlist
    SQ 1Std 25Min
    Free

    1/9

    Title List - Original

    SQ 1Std 25Min
    Free
    Play
    Search
    >
    Delete
    Protect
    Edit
    >
    Playlist Add
    >
    Dubbing
    OK Select

    Select Playlist
    TITLE
    1 PlaylistTITLE 2
    New
    21.11. 0:25:30
    22.11. 0:33:12

    TITLE 3
    23.11. 0:45:00

    TITLE 4
    24.11. 0:12:55

    TITLE 6
    28.11. 0:08:42

    NAME1

    INFO

    Info

    TITLE 5
    24.11. 0:05:00
    TEXT

    Playlist

    END

    Close

    5634 Select Title List Playlist in which a title or chapter is
    to be inserted.
    Confirm with OK.
    The added chapters are displayed in the menu (Search - Chapter) Chapter List - Playlist.
    Chapter List - Playlist

    2/2

    TITLE 2
    21.11. 0:25:30

    Confirm with OK.
    The available options are displayed at the left.
    Play
    Title
    Delete
    Combine
    Move
    OK

    Select

    TEXT

    Original

    END

    Close

    End editing of the Playlist.
    4:3
    - 56

    16 : 9



  • Page 57

    Edit recordings
    Delete title/chapter from Original/Playlist

    Delete part

    When you delete a title or a chapter from the playlist, you only remove the title/
    chapter from the playlist.
    When you delete a title or chapter from the original list, title/chapter are deleted
    from the disc and the time remaining for recording is prolonged again. Titles or
    chapters deleted from the original are also deleted from the playlist.

    HDD -RW VR
    You can delete a part which you no longer want in the title.

    ➠ You cannot delete chapters with a playing time of less than 5 seconds.

    5634 Select title in the Title List menu.
    Confirm with OK.
    The available options are displayed at the left.

    5634 Select a title/chapter in the menu Title List Original or Chapter List - Original which is to be deleted from
    the playlist.

    564 Select Edit – Delete Part.

    Mark title or folder. A symbol (✓) appears at the title.

    The Edit menu (Delete Part) is displayed.

    Confirm with OK.

    The Start point symbol is marked.
    Edit

    The available options are displayed at the left.

    Delete Part

    56 Select Delete.
    Example: Title List (HDD):
    Title List

    1/9

    HDD
    SQ 1Std 25Min
    Free
    Play
    Search
    >
    Delete
    Rename
    Edit
    >
    Sort
    >
    Dubbing
    OK Select

    Confirm with OK.

    TITEL 1
    21.11. 0:25:30

    TITLE 2
    22.11. 0:33:12

    TITLE 3
    23.11. 0:45:00

    TITLE 5
    24.11. 0:05:00

    TITLE 6
    28.11. 0:08:42

    Start Point
    End Point
    Next Part
    Cancel
    Done
    OK

    TITLE 1
    24.11. 0:12:55

    Select

    II

    0:00:33
    Move Point

    END

    Close

    34 Start play-back and search the start point with single frame,
    search and slow motion.
    4:3

    TITLE 4
    24.11. 0:12:55
    INFO

    Info

    MARKER

    Mark

    END

    OK at the start point of the clip to be deleted.

    Close

    Confirm with OK. A delete prompt is displayed.
    56 Select yes.

    4:3
    16 : 9

    Confirm with OK. The chapter or title is deleted.
    OK displays the updated menu.
    End editing.
    ➠ For DVD+R/DVD+RW recordings the deleted title is renamed after “Deleted
    Title”.

    16 : 9

    The End point symbol is marked.
    34 Search the end point with single frame, search and slow
    motion.
    Confirm with OK.
    ➠ Other parts can be deleted in recordings on the HDD. Select
    Next Part in the menu, press OK and repeat the steps
    described above.
    56 End editing with Done.
    Confirm with OK. A delete prompt is displayed.

    ➠ In case of fast deleting of more than two titles in succession, the titles are
    combined as one.

    34 Select yes.

    ➠ When deleting a title or chapter, the remaining recording time is increased
    on the DVD+RW only by the size of the title which was deleted at the end.

    34 Select Cancel to reject the editing.

    Confirm with OK. The selected part is deleted from the title.

    57 -



  • Page 58

    Edit recordings
    Title Name

    Select title start point

    You can assign names to the titles of Original or Playlist. The names may have a
    maximum 32 characters. A genre can be added to the name (HDD).

    HDD -RW VR -RW Video +RW +R -R
    You can select the start point of the title.

    5634 Select title to be renamed in the Title List menu.

    5634 Select title in the Title List menu.

    Confirm with OK. The available options are displayed at the
    left.

    Confirm with OK.

    56 Select Title Name/Rename.

    56 Select Search - Time.

    Confirm with OK.

    Confirm with OK.

    The Keyboard menu is displayed.

    The Search menu is displayed on the screen.

    Title List
    HDD

    1/16
    ABC|

    SQ 80H 09M
    Docu Free
    Edu
    Titel11 2
    Play
    21.11. 0:25:30
    News Drama
    A B
    Search
    >
    Delete
    Animat. Sports
    K L
    Rename
    Movie Show
    U V
    Edit
    >
    Titel 4
    Clear
    ' ´
    Sort AV In
    >
    24.11. 0:12:55
    Dubbing Genre
    Space
    INFO Info
    OK Enter

    4 Titel5 2 6 7
    22.11. 0:33:12
    D E F G
    N O P Q
    X Y Z Æ
    ~Titel "5 ° Þ
    24.11. 0:05:00

    Delete

    8 Titel93 0
    23.11. 0:45:00
    H I J
    R S T
    Ç Đ Ø
    ßTitelµ6 .
    28.11. 0:08:42

    Search with ◄ ►and Select
    TITLE 1
    24.11. 0:12:55

    Time

    OK Cancel
    END

    Close

    Explanations of the options:
    4:3

    Alphabet Capital Switches the keyboard to capitals.
    16 : 9

    Alphabet Small Switches the keyboard to small letters.

    Symbol Switches the keyboard to special characters.

    ABC...123 Inserts the selected character at the cursor position
    (shaded grey for special characters).

    OK Save setting and exit.

    Cancel Exit setting without saving.

    Space Inserts a space at the cursor.

    Delete Deletes characters to the left of the cursor.

    3456 Moves the marker in the selection.

    Inserts a space at the cursor.

    Deletes the characters to the right of the cursor.

    Deletes the character to the left of the cursor.

    P+ / P- Moves the cursor to the left or right.

    Genre Assigns the title to a genre (HDD).

    ,
    Switches the keyboard back and forth among
    capitals, small letters and synbols.

    - 58

    Example: Title List (HDD):
    Search

    Alphabet Capital
    3
    C
    M
    W
    ^

    The available options are displayed at the left.

    OK

    Play

    11:52

    12:06
    13:07
    Move Point END Close

    34 Select the desired start point.
    The time changes in one minute steps.

    4:3
    16 : 9

    34 Keep pressed to increase the time in steps of 5 minutes.
    OK to start at the desired point.

    Select chapter
    HDD -RW VR -RW Video +RW +R -R
    You can select any chapter from a title.
    5634Select title in the Title List menu.
    Confirm with OK.
    The available options are displayed at the left.
    56 Select Search - Chapter.
    Confirm with OK.

    Select the OK button and save with OK.

    The Chapter List menu is displayed.

    ➠ On DVD-R-, DVD+R- or DVD+RW discs, the entered name is
    only displayed after finalisation.

    5634 Select desired chapter.
    OK to start at the selected point.



  • Page 59

    Edit recordings
    Sorting

    Combine titles

    HDD
    With this function the title list can be sorted by date, title or genre for quicker
    retrieval of titles.

    HDD
    With this function two adjacent original titles on the HDD can be united.

    5634 Select title in the Title List menu of the HDD.

    ➠ This function is not available if only one title is saved on the HDD.
    ➠ No titles can be combined of there are more than 60 titles on the HDD.

    Confirm with OK.
    The available options are displayed at the left.
    56 Select Sort.

    5634 Select first title of the two titles to be joined in the
    Title List menu.

    Confirm with OK.

    Confirm with OK.

    The options for sorting are displayed.

    The available options are displayed at the left.

    Title List

    1/16

    Confirm with OK.

    HDD
    SQ 80H 09M
    Free

    Play
    Search
    Delete
    Rename
    Edit
    Sort
    Dubbing
    OK Select

    >

    56 Select Edit - Combine.

    TITLE 1
    21.11. 0:25:30

    TITLE 2
    22.11. 0:33:12

    TITLE 3
    23.11. 0:45:00

    TITLE 5
    24.11. 0:05:00

    TITLE 6
    28.11. 0:08:42

    Title List

    Date

    > Title
    TITLE 4
    > Genre
    24.11. 0:12:55
    INFO

    Info

    MARKER

    Mark

    END

    SQ 80H 09M
    Free

    Close

    56 Select Date, Title or Genre.
    OK Display menu with selected sorting.

    1/16

    HDD

    4:3
    16 : 9

    Play
    Search
    Delete
    Rename
    Edit
    Sort
    Dubbing
    OK Select

    >

    TITLE 1
    21.11. 0:25:30

    TITLE 2
    22.11. 0:33:12

    TITLE 3
    23.11. 0:45:00

    TITLE 5
    24.11. 0:05:00

    TITLE 6
    28.11. 0:08:42

    Combine

    > Divide
    TITLE 4
    > Delete
    24.11.Part
    0:12:55
    INFO

    Info

    MARKER

    Mark

    END

    Close

    5634 Select second title of the two titles to be joined.
    Confirm with OK.
    A confirmation message is displayed.

    4:3
    16 : 9

    56 Select yes.
    Confirm with OK. The updated Title List menu is displayed.

    59 -



  • Page 60

    Edit recordings
    Divide title

    Combine chapters

    HDD +RW
    With this function you can divide a title into two new titles.

    HDD -RW VR +RW +R
    With this function two adjacent playlist or original chapters can be united.

    5634 Select title to be divided in the Title List menu.

    ➠ This function is not available if the title only contains one chapter.

    The available options are displayed at the left.

    5634 The second of the two chapters to be united should
    be selected in the (Title List - Search - Chapter) Chapter List
    menu.

    56 Select Edit - Divide.

    Confirm with OK.

    Confirm with OK.

    Example: Title List (HDD):

    The available options are displayed at the left.

    Title List

    1/16

    Chapter List

    2/2

    HDD

    TITLE 2
    21.11. 0:25:30 SQ ARD

    SQ 80H 09M
    Free

    Play
    Search
    Delete
    Rename
    Edit
    Sort
    Dubbing
    OK Select

    TITLE 1
    21.11. 0:25:30

    >

    TITLE 2
    22.11. 0:33:12

    TITLE 3
    23.11. 0:45:00

    TITLE 5
    24.11. 0:05:00

    TITLE 6
    28.11. 0:08:42

    Combine

    > Divide
    TITLE 4
    > Delete
    24.11.Part
    0:12:55
    INFO

    Info

    MARKER

    Mark

    END

    Close

    Confirm with OK.
    4 : 3 is
    The menu Edit - Divide is displayed and the Divide option
    16 : 9
    marked.

    Edit

    Play
    Title
    Combine
    OK

    Select

    END

    Close

    56 Select Combine. The combination indicator is shown
    between the two chapters which you can join.
    Confirm with OK.

    4:3

    16 : 9

    DVD additional functions
    TITLE 1
    24.11. 0:12:55

    Divide

    In the Title list DVD you can open certain disc functions directly.
    5634 Select Disc.
    #1

    00:00:00

    56Select the desired option.

    Divide
    Cancel
    Done
    OK

    Select

    II

    0:00:33
    Move Point

    END

    Close

    34 Seek the start point for dividing the title with single frame,
    seek and slow motion.
    4:3
    56 Select Divide.

    16 : 9

    Confirm with OK.
    56 Select Done.
    Confirm with OK. The title is divided into two new titles. This
    process may last up to 4 minutes.
    ➠ Division points must be at least three seconds apart.
    - 60

    Confirm with OK.
    Confirm with OK.
    Disc Format The inserted disc is initialised for recordings in this recorder
    (page 33).

    Finalize The inserted disc is finalized (page 34).
    Unfinalize The finalization is undone.
    Disc Label Edits the title name; assignment to genre (page 58).

    Protect Prevents accidental recording, editing or deleting of a title
    (page 34).



  • Page 61

    Edit recordings
    Move Playlists Chapters

    Example: Title List (DVD+RW):

    -RW VR
    With this function the play-back order of the chapters within Playlists can be
    edited.

    Title List

    1/15

    DVD+RW
    SQ 25Min
    Free

    ➠ This function is not available if only one chapter is available.
    5634 Select chapter in the Chapter List - Playlist
    menu.
    Confirm with OK.
    The available options are displayed at the left.

    Play
    Full Play
    Search
    Delete
    Protect
    Edit
    Dubbing

    >

    TITLE 1
    21.11. 0:25:30

    Title Name

    TITLE 3
    23.11. 0:45:00

    TITLE 5
    24.11. 0:05:00

    TITLE 6
    28.11. 0:08:42

    Divide

    4
    > HideTITLE
    24.11. 0:12:55
    OK

    56 Select Move.

    TITLE 2
    22.11. 0:33:12

    Select

    INFO

    Info

    END

    Close

    Protect title

    Confirm with OK.
    Chapter List - Playlist

    2/2

    TITLE 2
    21.11. 0:25:30

    -RW VR +RW +R
    This function prevents accidental overwriting, editing or deleting of a title.
    Select Title List menu.
    5634 Select the title to be protected.

    Play
    Title
    Delete
    Combine
    Move

    Confirm with OK.
    The available options are displayed at the left.
    OK

    Select

    TEXT

    Original

    END

    Close

    Title List

    5634 Select position of chapter.
    Confirm with OK. The updated menu is displayed.

    Hide title/chapter

    56 Select Protect.

    4:3
    16 : 9

    +RW +R
    Playing of selected chapters or titles can be skipped by the disc.
    5634 Select the chapters to be hidden in the Title List or
    Chapter List menu.
    Confirm with OK.
    The available options are displayed at the left.
    56 Select Edit - Hide.
    Confirm with OK. The thumbnail of the chapter or title is
    hidden.

    1/15

    DVD+RW
    SQ 25Min
    Free

    Play
    Full Play
    Search
    Delete
    Protect
    Edit
    Dubbing

    TITLE 1
    21.11. 0:25:30

    TITLE 2
    22.11. 0:33:12

    TITLE 3
    23.11. 0:45:00

    TITLE 4
    24.11. 0:12:55

    TITLE 5
    24.11. 0:05:00

    TITLE 6
    28.11. 0:08:42

    >
    >

    OK

    Select

    INFO

    Info

    END

    Close

    Confirm with OK. The lock marker appears in the title thumbnail.
    4:3
    16 List
    :9
    ➠ If you select a title which is already protected in the Title
    menu, this can be enabled by selecting Unprotected in the
    options of the Title List menu. Then the title can be edited
    and deleted.

    ➠ When selecting, a hidden chapter or title can be shown in
    the Title List or Chapter List menu by selecting the Edit Display option in the menu. Then the chapter or title is
    displayed.

    61 -



  • Page 62

    Dubbing
    Before dubbing
    With the dubbing function of this recorder you can
    • create backup copies of important recordings on the HDD on a DVD.
    • Create a DVD copy of a recording on the HDD for playing on other players.
    • Copy films recorded on this recorder from DVD to hard disc.
    • Copy edited movies from the HDD to a DVD.

    High-Speed dubbing (maximum 12x)
    Copying DVDs to the harddisc is a completely digital process and therefore takes
    place with losing picture and sound quality. The dubbing process can take place
    at high speed. When dubbing from HDD to DVD, the dubbing speed depends on
    the recording quality and the DVD disc used.
    Minimum duration for high-speed dubbing
    The following table contains the respective minimum duration for dubbing a twohour movie recorded in SQ mode from HDD to DVD.

    ➠ Purchased video DVDs or disks that have been recorded on other recorders
    cannot be copied onto the hard disk.

    Disc type

    ➠ Titles which are shorter than 5 seconds cannot be copied from HDD to DVD.

    DVD-R / DVD+R

    16x

    6.5 min. (12x)

    Restrictions when dubbing
    Some movies have a single copy protection: These movies cannot be copied to
    HDD or DVD.
    Single copy protection movies are recognizable by display of the disc information
    with INFO during play-back.
    • Signals in NTSC format from the analog or the DV inputs canot be recorded
    correctly with this recorder.
    • Video signals in SECAM format (from the integrated TV tuner or analog inputs)
    are recorded in PAL format.
    • Please also see the hints for recording on page 14.

    DVD-R / DVD+R
    / DVD+RW

    8x

    8 min. (8x)

    DVD-RW

    6x

    12 min. (6x)

    DVD-R / DVD+R
    DVD-RW / DVD+RW

    4x

    13 min. (4x)

    DVD+R / DVD+RW

    2.4x

    DVD-R / DVD-RW

    2x

    PLEASE NOTE THAT NOT EVERY HIGH DEFINITION DEVICE IS FULLY COMPATIBLE
    WITH THIS PRODUCT AND THAT ARTEFACTS MAY OCCUR WHEN DISPLAYING THE
    PICTURE. IF 625 PROGRESSIVE SCAN PICTURE DISPLAY IS FAULTY, WE RECOMMEND
    SETTING THE CONNECTION TO THE “STANDARD DEFINITION” OUTPUT. PLEASE
    CONTACT OUR CUSTOMER SERVICE IF YOU HAVE ANY QUESTIONS ABOUT THE
    COMPATIBILITY OF THE TV WITH THIS RECORDER (page 70).

    - 62

    Disc speed

    Dubbing time (recording speed)

    21 min. (2.4x)
    25 min. (2x)

    ➠ The specified times are approximate values.
    ➠ The actual dubbing speeds may vary with different disc recordings.
    ➠ Even 4x-/6x-/8x-/16x¬compatible discs may not be dubbed at maximum speed.
    ➠ High-speed dubbing is not always possible with discs initialized on another device.



  • Page 63

    Dubbing
    Dub from HDD to DVD

    Dub from DVD to HDD

    Select menu Tile List (HDD).

    Select menu Tile List – Original (DVD).

    5634 Select title.

    5634 Select title.

    Mark title.

    Confirm with OK.

    Confirm with OK.

    The available options are displayed at the bottom left.

    Title List

    1/16

    HDD

    1/15

    DVD-RW

    SQ 80H 09M
    Free

    Play
    Search
    Delete
    Rename
    Edit
    Sort
    Dubbing
    OK Select

    Title List - Original

    >
    >
    >

    TITLE 1
    21.11. 0:25:30

    TITLE 2
    22.11. 0:33:12

    TITLE 3
    23.11. 0:45:00

    TITLE 4
    24.11. 0:12:55

    TITLE 5
    24.11. 0:05:00

    TITLE 6
    28.11. 0:08:42

    INFO

    Info

    MARKER

    Mark

    END

    Close

    SQ 25M
    Free

    Play
    Search
    Delete
    Protect
    Edit
    Playlist Add
    Dubbing
    OK Select

    >
    >
    >

    TITLE 1
    21.11. 0:25:30

    TITLE 2
    22.11. 0:33:12

    TITLE 3
    23.11. 0:45:00

    TITLE 4
    24.11. 0:12:55

    TITLE 5
    24.11. 0:05:00

    TITLE 6
    28.11. 0:08:42

    INFO

    Info

    TEXT

    Confirm with OK. The Dubbing menu appears.
    Dubbing

    4:3
    16 : 9

    Confirm with OK. The Dubbing menu appears.

    Close

    00:45:00

    Title Length

    01:45:00

    Free Space

    120 min

    Free Space

    2473 min

    Rec Mode

    HQ

    Start

    Cancel

    4:3
    16 : 9

    Dubbing

    Title Length

    Start

    END

    56 Select Dubbing.

    56 Select Dubbing.

    Rec Mode

    Playlist

    HQ
    Cancel

    5634 Select Rec Mode (HQ, SQ, LQ, EQ, Fast, AUTO).

    5634 Select Rec Mode (HQ, SQ, LQ, EQ, Fast , AUTO).

    6 Select Start button.

    6 Select Start button.

    OK start dubbing.

    OK start dubbing.
    20%

    20%

    Cancel dubbing.

    Cancel dubbing.

    ➠ The recording time in Fast mode may vary depending on the
    amount of source data.

    ➠ Dubbing may not always be possible depending on the
    conditions of the recording device or the disc itself.

    ➠ When aborting the dubbing in Fast mode the recording is
    halted and all the data recorded up to this point are lost.

    ➠ When aborting the dubbing in Fast mode the recording is
    halted and all the data recorded up to this point are lost.

    ➠ The Fast mode is not possible if there is not enough memory
    space remaining on the disc.

    ➠ The recording time in the Fast mode may be up to 19 minutes.

    ➠ The Fast mode is not possible for edited titles on the HDD
    and clip recordings.

    ➠ The Fast mode is not available for edited titles on DVD-RW
    in the VR recording mode.
    63 -



  • Page 64

    Dubbing
    Overwrite recordings

    Title List menus on other devices

    +RW
    Proceed as follows to overwrite a recorded title with a new video recording:

    +RW +R
    The Title List menu can be displayed on DVD players on which DVD+RW or DVD+R
    discs can be played.

    ➠ This function is not possible for DVD+R because the recordings are always
    made at the end of the disc here.
    Switch the recorder input to the signal source you wish to record
    from with the number buttons, the P+ / P- buttons or the 0 AV
    button.

    Insert a written DVD+R or DVD+RW disc.
    Select the Title menu (see user guide of the respective unit).
    DVD+RW

    Select Title List menu.
    Title List

    1/12

    DVD+RW
    SQ 25M
    Free

    TITLE 1
    21.11. 0:25:30

    TITLE 2
    22.11. 0:33:12

    TITLE 3
    23.11. 0:45:00

    TITLE 1
    21.11. 0:25:30

    TITLE 2
    22.11. 0:33:12

    TITLE 3
    23.11. 0:45:00

    TITLE 4
    24.11. 0:12:55

    TITLE 5
    24.11. 0:05:00

    TITLE 6
    28.11. 0:08:42

    <<

    Disc
    OK

    >
    Select

    TITLE 4
    24.11. 0:12:55
    INFO

    Info

    TITLE 5
    24.11. 0:05:00

    REC

    TITLE 6
    28.11. 0:08:42
    END

    Close

    5634 Select title to be overwritten.
    Start overwriting.

    4:3
    16 : 9

    The overwriting begins at the start point of the selected title.

    End recording. The new title is created and the updated menu
    is displayed.

    >>

    Playing on other devices

    4:3

    Finalised discs, finalised DVD+R or DVD+RW discs recorded in video mode can
    be
    16 : 9
    played on most DVD players. Some players can play fialised/unfinalised DVD-RW
    discs recorded in VR mode. Look in the player user guide to find out which disc
    formats it supports. In the finalisation the recordings are “fixed” so that the disc
    can be played on normal DVD players or computers with a DVD-ROM drive.
    In the finalisation of a disc in video mode, a menu is created for controlling the
    disc. Access is obtained with the MENU or TITLE buttons. For finalisation of a
    disc, please read “Finalisation” on page 34.

    ➠ This function is not possible for protected titles (page 61).

    ➠ Unfinalised DVD+RW discs can be played on normal DVD players.

    ➠ If the overwriting title is longer than the recorded title, the
    following title is overwritten . However, if the following title
    is protected, the recording stops a the start point of this
    title.

    ➠ Edited contents of a DVD+RW disc can only be played on normal DVD players
    after finalisation.

    ➠ If the length of the selected title is shorter than 10 seconds,
    the following title is overwritten. However, if this title is protected, recording stops.

    - 64

    1/1

    ➠ Edited contents of a DVD+R disc (hidden files, combined chapters, added
    chapter markers etc.) cannot be played on normal DVD players.



  • Page 65

    Troubleshooting
    Problem

    Possible cause

    Remedy

    No function.

    The mains cable is not plugged in.

    Fix the mains cable firmly into a socket.

    No image.

    The television is not switched to receive signals from the Recorder.

    Select the right video input mode on the television, so that
    the image from the Recorder appears on the television
    screen.

    The SCART/HDMI cable is not properly connected.

    Connect the SCART/HDMI cable properly.

    The television that is connected is switched off.

    Switch the television on.

    The connected audio equipment is
    not switched to DVD playback.

    Set the audio receiver so that you can hear the sound playing
    on your Recorder.

    The audio cables are not properly connected.

    Connect the audio cable properly.

    The connected audio equipment is switched off.

    Switch on the audio equipment that is connected.

    The audio connection cable is faulty.

    Change it.

    Inferior picture quality.

    The disc is dirty.

    Clean the disc.

    Playback not possible.

    There is no disc.

    Insert a disc. (Check that the disc display
    comes on in the display window.)

    A non-playable disc has been inserted.

    Insert a playable disc. (Check the disc type, the colour system
    and the region code.)

    The disc has not been inserted with the playable
    side downwards.

    Insert the disc with the playable side downwards.

    The disc has not been properly placed in the guide.

    Position the disc properly into the guide in the disc drawer.

    The disc is dirty.

    Clean the disc.

    A security rating has been set.

    Cancel the security rating or change the protection.

    There is interference with images from an
    external source.

    The video signal from the external component is
    copy-protected.

    You cannot get a connection from this recorder. Connect the
    component directly into the television.

    A channel is skipped when using P+ / P- .

    The stations are locked.

    Switch the Lock option to Off (page 30).

    The image or sound on the transmission channel
    is weak or absent.

    Loose antenna or cable.

    Tighten the connections or change the cable.

    The camcorder image is not displaying.

    The camcorder is switched off.

    Switch on the camcorder and make sure your are using it
    properly.

    The camcorder image is not appearing on the
    television screen when using the A/V input or
    DV IN to the Recorder.

    The Recorder AV selection is wrong.

    Select the input channel (AV1, AV2, DV etc.) with DVD-AV.

    A disc that was recorded to from this Recorder
    cannot be played on a different DVD player.

    The disc was recorded in video mode.

    Finalising the disc (page 34).

    No sound.

    65 -



  • Page 66

    Troubleshooting
    Problem

    Possible cause

    Remedy

    A disc that was recorded to from this Recorder
    cannot be played on a different DVD player.

    Some players do not play discs with finalisation in
    video mode.

    No solution.

    The disc was recorded in VR mode.

    The other player must be RW-compatible.

    The ability of CD-R / RWs (MP3/WMA, JPEG,
    (X)VCD, (X)SVCD) and DVD+R / RWs and DVD-R
    / RWs is influenced by the recording equipment,
    recording methods and data media. Therefore,
    there may be problems occasionally when playing
    on conventional DVD players.

    No solution.

    There is insufficient space on the disc.

    Use a different disc.

    The source that you want to record is copy-protected.

    You cannot record the source.

    Copy-protected broadcasts cannot be recorded on a
    video mode disc.

    Use a disc formatted in the VR mode for once copiable
    material.

    The time has not been set correctly on the recorder.

    Set the correct time. See “Setting the time automatically“ or
    “Setting the time manually“ on page 27.

    The timer was wrongly programmed.

    Re-program the timer. See “Timer recording“ on page 51.

    The time between programming the timer and the
    start of recording is too short.

    The recording‘s start time must be at least 3 minutes into the
    future.

    After programming, the timer recording symbol is no
    longer displayed.

    Re-program the timer.

    The television is not stereo-compatible or the
    broadcast transmission is not in stereo format.

    No solution.

    The Recorder’s A/V Out sockets are not connected
    to the TV’s A/V In sockets.

    Make the A/V connections.

    The Recorder’s audio/video Out has not been
    selected for the television.

    Select the AUX or A/V source as the TV input.

    The DVD recorder’s TV audio channel must be set
    to Mono.

    Set the TV’s audio channel to stereo.

    The remote control is not working properly.

    The remote control’s batteries have run out.

    Replace the old batteries with new ones.

    Interference is visible at the top and
    bottom edges of the screen.

    Unfavourable resolution setting in HDMI mode.

    Set the resolution to 1080i with the RES button (page 37).

    The recorder is not working normally.

    The unit is in an undefined state.

    Reset the recorder (page 20).

    Playback not possible or unsuccessful.

    Timer recording not possible.

    Stereo-audio recording and/or playback
    unavailable.

    - 66



  • Page 67

    Technical Specifications
    General

    Outputs

    ViewVision DR+ DVB-T
    Item No. 67502A/D/T00
    ViewVision DR+ DR+ DVB-T Secam Item No. 67505A/D/T00
    Power supply
    AC 200-240V, 50/60 Hz
    Power consumption
    During operation: 30 W

    In standby mode: <1 W

    (with energy save function)
    Dimensions (approx.)
    430 x 60 x 280 mm (W x H x D)
    Weight (approx.)
    4,6 kg
    Operating temperature
    5 °C to 35 °C
    Humidity
    5 % to 90 %
    TV system
    ViewVision DR+ DVB-T PAL B/G, I, Secam DK

    ViewVision DR+ DVB-T PAL B/G, Secam L
    Recording format
    PAL

    HDMI OUT
    Type A, 19 Pin, LVDS digital, V1.2a
    S-VIDEO OUT
    (Y) 1,0 V (p-p), 75 ohms , negative Sync.,

    (C) 0,3 V (p-p) 75 ohms, Mini DIN 4-pin x 1
    COMPONENT VIDEO OUT
    (Y) 1,0 V (p-p), 75 ohms, negative Sync.,

    RCA socket x 1 (Pb)/(Pr) 0,7 V (p-p),

    75 ohms, RCA socket x 3
    Audio output (digital audio)
    0,5 V (p-p), 75 ohms, RCA socket x 1
    Audio output (optical audio)
    Optical connector x 1 (TOS-Link)
    Audio output (analogue audio) 2,0 Vrms (1 kHz, 0 dB), 600 ohms,

    RCA socket (L, R) x 1 / SCART

    Recording
    Recording format
    DVD Video-Recording, DVD-VIDEO
    Rewritable memory media
    Harddisc (HDD) 250 GB,

    DVD-RW, DVD-R,

    DVD+RW, DVD+R
    Video recording format
    Sampling frequency 27MHz
    Compression format
    MPEG 2
    Audio recording format
    Sampling frequency
    48kHz
    Compression format
    Dolby Digital

    Playback
    Frequency response


    Signal-to-noise ratio
    Harmonic distortion
    Dynamic range

    Masthead
    The Loewe Opta GmbH is a share company of German law with its Head Office
    in Kronach.
    Industriestraße 11, 96317 Kronach
    Telephone: + 49 (0)9261 / 99-0
    Fax:
    + 49 (0)9261 / 99-500
    E-mail: ccc@loewe.de
    Trade Register: Municipal Court Coburg, No. HRB 42243
    VAT ID-No.: DE 193216550
    WEEE registration no.: DE 41359413
    Issue 04.08 3rd edition
    © Loewe Opta GmbH, Kronach
    All rights reserved including translation.
    Design and technical specifi cations are subject to change without notice.

    DVD (PCM 48 kHz): 8 Hz to 22kHz,
    CD: 8 Hz to 20 kHz
    DVD (PCM 96 kHz): 8 Hz to 44 kHz
    > 100 dB (AUDIO OUT connection)
    < 0,008% (AUDIO OUT connection)
    > 95 dB (AUDIO OUT connection)

    Inputs
    AERIAL IN
    Digital aerial supply
    VIDEO IN

    AUDIO IN

    DV IN
    USB

    Aerial input, 75 ohms
    5 V/0,1 A (double insulated, switchable).
    1.0 Vp-p 75 ohms, negative sync. ,
    RCA socket x 2 / SCART x 2
    0 dBm > 47 kOhm, RCA socket
    (L, R) x 2 / SCART x 2
    4 Pins (i.LINK/IEEE 1394-Standard/DV-25)
    V 1.1

    67 -



  • Page 68

    Language Code List
    Enter the appropriate code when fi rst setting up “Disc Audio“, “Disc Subtitles“ and/or “Disc Menu“. (Further information can be found under “Disc Languages“ on
    page 28.)
    Code
    6565
    6566
    6570
    6577
    6582
    6583
    6588
    6590
    6665
    6669
    6671
    6672
    6678
    6679
    6682
    6765
    6779
    6783
    6789
    6865
    6869
    6890
    6976
    6978
    6979
    6983
    6984
    6985
    7065
    7073
    7074
    7079
    7082
    7089
    7165
    7168

    7176
    7178
    7185
    7265
    7273
    7282
    7285
    7289
    7365
    7378
    7383
    7384
    - 68

    Language
    Afar
    Abkhaz
    Afrikaans
    Amharic
    Arabic
    Assamese
    Aymara
    Azerbaijani
    Bashkir
    Byelorussian
    Bulgarian
    Bihari
    Bengali; Bangla
    Tibetan
    Breton
    Catalan
    Corsican
    Czech
    Welsh
    Danish
    German
    Bhutanese
    Greek
    English
    Esperanto
    Spanish
    Estonian
    Basque
    Persian
    Finnish
    Fijian
    Faroese
    French
    Frisian
    Irish
    Scottish
    Gaelic
    Galician
    Guarani
    Gujarati
    Hausa
    Hindi
    Croatian
    Hungarian
    Armenian
    Interlingua
    Indonesian
    Icelandic
    Italian

    Code
    7387
    7465
    7473
    7487
    7565
    7575
    7576
    7577
    7578
    7579
    7583
    7585
    7589
    7665
    7678
    7679
    7684
    7686
    7771
    7773
    7775
    7776
    7778
    7779
    7782
    7783
    7784
    7789
    7865
    7869
    7876
    7879
    7982
    8065
    8076
    8083
    8084
    8185
    8277
    8279
    8285
    8365
    8368
    8372
    8373
    8375
    8376
    8377
    8378

    Language
    Hebrew
    Japanese
    Yiddish
    Javanese
    Georgian
    Kazakh
    Greenlandic
    Cambodian
    Canadian
    Korean
    Kashmiri
    Kurdish
    Kirgiz
    Latin
    Lingala
    Laotian
    Lituanian
    Latvian
    Malagasy
    Maori
    Macedonian
    Malayalam
    Mongolian
    Moldovian
    Marathi
    Malay
    Maltese
    Burmese
    Nauruan
    Nepalese
    Dutch
    Norwegian
    Oriya
    Punjabi
    Polish
    Pashto
    Portuguese
    Quechua
    Romansh
    Romanian
    Russian
    Sanskrit
    Sindhi
    Serbocroat
    Singhalese
    Slovak
    Slovene
    Samoan
    Shona

    Code
    8379
    8381
    8382
    8385
    8386
    8387
    8465
    8469
    8471
    8472
    8473
    8475
    8476
    8479
    8482
    8484
    8487
    8575
    8582
    8590
    8673
    8679
    8779
    8872
    8979
    9072
    9085

    Language
    Somali
    Albanian
    Serbian
    Sudanese
    Swedish
    Swahili
    Tamil
    Telugu
    Tadzhik
    Thai
    Tigrinya
    Turkmen
    Tagalog
    Tongan
    Turkish
    Tatar
    Twi
    Ukranian
    Urdu
    Uzbek
    Vietnamese
    Volapuk
    Wolof
    Xhosa
    Yoruba
    Chinese
    Zulu



  • Page 69

    List of country codes
    Key in the corresponding code when first setting the “Area code“ (page 31).
    Code
    AD
    AE
    AF
    AG
    AI
    AL
    AM
    AN
    AO
    AQ
    AR
    AS
    AT
    AU
    AW
    AZ
    BA
    BB
    BD
    BE
    BF
    BG
    BH
    BI
    BJ
    BM
    BN
    BO
    BR
    BS
    BT
    BV
    BW
    BY
    BZ
    CA
    CC
    CF
    CG
    CH
    CI
    CK
    CL
    CM
    CN
    CO
    CR
    CS
    CU

    Country code
    Andorra
    United Arab Emirates
    Afghanistan
    Antigua and Barbuda
    Anguilla
    Albania
    Armenia
    Dutch Antilles
    Angola
    Antarctic
    Argentina
    American Samoa
    Austria
    Australia
    Aruba
    Azerbaizhan
    Bosnia-Herzegovina
    Barbados
    Bangladesh
    Belgium
    Burkina Faso
    Bulgaria
    Bahrain
    Burundi
    Benin
    Bermuda
    Brunei Darussalam
    Bolivia
    Brazil
    Bahamas
    Bhutan
    Bouvet Island
    Botswana
    Byelorussia
    Belize
    Canada
    Cocos (Keeling) Islands
    Central African Republic
    Congo
    Switzerland
    Ivory Coast
    Cook Islands
    Chile
    Cameroon
    China
    Columbia
    Costa Rica
    Former Czechoslovakia
    Cuba

    Code
    CV
    CX
    CY
    CZ
    DE
    DJ
    DK
    DM
    DO
    DZ
    EC
    EE
    EG
    EH
    ER
    ES
    ET
    FI
    FJ
    FK
    FM
    FO
    FR
    FX

    GA
    GB
    GD
    GE
    GF
    GH
    GI
    GL
    GM
    GN
    GP
    GQ
    GR
    GS
    GT
    GU
    GW
    GY
    HK
    HM

    HN
    HR
    HT

    Country code
    Cape Verde
    Christmas Islands
    Cyprus
    Czech Republic
    Germany
    Djibouti
    Denmark
    Dominica
    Dominican Republic
    Algeria
    Ecuador
    Estonia
    Egypt
    West Sahara
    Eritrea
    Spain
    Ethiopia
    Finland
    Fiji
    Falkland Islands
    Micronesia
    Faroe Islands
    France
    France (European
    Territory)
    Gabon
    Great Britain
    Grenada
    Georgia
    French Guyana
    Ghana
    Gibraltar
    Greenland
    Gambia
    Guinea
    Guadeloupe (French)
    Equatorial Guinea
    Greece
    S. Georgia & S. Sandwich Islands
    Guatemala
    Guam (USA)
    Guinea Bissau
    Guyana
    Hong Kong
    Heard and McDonald
    Islands
    Honduras
    Croatia
    Haiti

    Code
    HU
    ID
    IE
    IL
    IN
    IO

    IQ
    IR
    IS
    IT
    JM
    JO
    JP
    KE
    KG
    KH
    KI
    KM
    KN
    KP
    KR
    KW
    KY
    KZ
    LA
    LB
    LC
    LI
    LK
    LR
    LS
    LT
    LU
    LV
    LY
    MA
    MC
    MD
    MG
    MH
    MK
    ML
    MM
    MN
    MO
    MP
    MQ
    MR

    Country code
    Hungary
    Indonesia
    Ireland
    Israel
    India
    British Territory
    in the Indian Ocean
    Iraq
    Iran
    Iceland
    Italy
    Jamaica
    Jordan
    Japan
    Kenya
    Kirghizia
    Cambodia
    Kiribati
    Comoros
    Saint Kitts and Nevis Anguilla
    North Korea
    South Korea
    Kuwait
    Cayman Islands
    Kazakhstan
    Laos
    Lebanon
    Saint Lucia
    Liechtenstein
    Sri Lanka
    Liberia
    Lesotho
    Lithuania
    Luxembourg
    Latvia
    Libya
    Morocco
    Monacco
    Moldova
    Madagascar
    Marshall Islands
    Macedonia
    Mali
    Myanmar
    Mongolia
    Macao
    Northern Mariana Islands
    Martinique (French)
    Mauretania

    Code
    MS
    MT
    MU
    MV
    MW
    MX
    MY
    MZ
    NA
    NC
    NE
    NF
    NG
    NI
    NL
    NO
    NP
    NR
    NU
    NZ
    OM
    PA
    PE
    PF
    PG
    PH
    PK
    PL
    PM
    PN
    PR
    PT
    PW
    PY
    QA
    RE
    RO
    RU
    RW
    SA

    Country code
    Montserrat
    Malta
    Mauritius
    Maldives
    Malawi
    Mexico
    Malaysia
    Mozambique
    Namibia
    New Caledonia (French)
    Niger
    Norfolk Island
    Nigeria
    Nicaragua
    Netherlands
    Norway
    Nepal
    Nauru
    Niue
    New Zealand
    Oman
    Panama
    Peru
    Polynesia (French)
    Papua New Guinea
    Philippines
    Pakistan
    Poland
    Saint Pierre and Miquelon
    Pitcairn Island
    Puerto Rico
    Portugal
    Palau
    Paraguay
    Qatar
    Reunion (French)
    Rumania
    Russian Federation
    Rwanda
    Saudi Arabia

    69 -



  • Page 70

    Service
    Loewe Austria GmbH
    Parkring 12
    1010 Wien, Österreich
    Tel +43 - 1 22 88 633 - 0
    Fax +43 - 1 22 88 633 - 90
    Email loewe@loewe.co.at

    Loewe Opta GmbH,
    Customer Care Center
    Industriestraße 11
    96317 Kronach, Deutschland
    Tel +49 1801–22256393
    Fax +49 9261–99500
    Email ccc@loewe.de

    ISSAGOGIKI EMBORIKI ELLADOS
    S.A.
    321 Mesogion Av.
    152 31 Chalandri-Athens, Hellas
    Tel +30 - 210 672 12 00
    Fax +30 - 210 674 02 04
    Email christina@bose-onkyo.gr

    International Dynamics
    Australasia Pty Ltd.
    129 Palmer Street
    Richmond 3121, Victoria,
    Australia
    Tel +61 - 3 - 94 29 08 22
    Fax +61 - 3 - 94 29 08 33
    Email mail@international
    dynamics.com.au

    Kjaerulff 1 A/S
    C.F. Tietgens Boulevard 19
    5220 Odense SØ, Denmark
    Tel +45 - 66 13 54 80
    Fax +45 - 66 13 54 10
    Email mail@kjaerulff1.com

    Basys Magyarorszagi KFT
    Tó park u.9.
    2045 Törökbálint, Magyar
    Tel +36 - 2341 56 37 (121)
    Fax +36 - 23 41 51 82
    Email basys@mail.basys.hu

    Gaplasa S.A.
    Conde de Torroja, 25
    28022 Madrid, España
    Tel +34 - 917 48 29 60
    Fax +34 - 913 29 16 75
    Email loewe@maygap.com

    Plug&Play
    Bednjanska 8, 10000 Zagreb
    Hrvatska (Kroatia)
    Tel +385 1 4929 683
    Fax +385 1 4929 682
    Email loewe@loewe.hr

    TEDRA TRADING OY
    Kuusemetsa 3
    Saue 76506, Estonia
    Tel +372 - 50 14 817
    Fax +372 - 67 09 611
    Email raivo@futurehifi.com

    Loewe Italiana SRL
    Largo del Perlar, 12
    37135 Verona (VR), Italia
    Tel +39 - 045 82 51 611
    Fax +39 - 045 82 51 622
    Email Stefano.Borgognoni@
    loewe.it

    Loewe Opta Benelux NV/SA
    Uilenbaan 84
    2160 Antwerpen, België
    Tel +32 - 3 - 2 70 99 30
    Fax +32 - 3 - 2 71 01 08
    Email ccc@loewe.be
    Darlington Service
    Kn. Klementina Street, bl. 193
    1618 Sofia, Bulgaria
    Tel +359 - 2 955 63 99
    Fax +359 - 2 955 63 99
    Email sac@audio-bg.com
    Telion AG
    Rütistrasse 26
    8952 Schlieren, Schweiz
    Tel +41 - 44 732 15 11
    Fax +41 - 44 732 15 02
    Email lgelpke@telion.ch
    HADJIKYRIAKOS & SONS LTD.
    121 Prodromos Str., P.O Box
    21587
    1511 Nicosia, Cyprus
    Tel +357 - 22 87 21 11
    Fax +357 - 22 66 33 91
    Email savvas@hadjikyriakos.
    com.cy
    K+B PROGRES A.S.
    U Expertu 91
    25069 Klicany u Prahy, Česko
    Tel +420 2 72 12 21 11 (222)
    Fax +420 2 72 12 22 39
    Email loewe@kbexpert.cz

    A Cappella
    Ausros Vartu 5, Pasazo skg.
    01129 Vilnius, Lithuania
    Tel +370 - 52 12 22 96
    Fax +370 - 52 62 66 81
    Email: aretas@acappella.lt

    Avitech Co. SRL
    1/II Pipera Tunari St.
    007190 Voluntari, Ilfov, Romania
    Tel +40 - 21 200 64 64
    Fax +40 - 21 200 64 65
    Email andrei.silisteanu@avitech.ro

    DONEO CO. LTD
    34/36 Danny Cremona Street
    Hamrun, HMR02, Malta
    Tel +356 - 21 - 22 53 81
    Fax +356 - 21 - 23 07 35
    Email info@doneo.com.mt

    Service Center Loewe
    ul. Verkhnaya Maslovka, d. 29
    125083 Moscow, Россия
    Tel +7 - 495 612 50 43
    Fax +7 - 495 612 47 10
    Email service@atc.ru

    SOMARA S.A.
    377, Rue Mustapha El Maani
    20000 Casablanca, Morocco
    Tel +212 - 22 22 03 08
    Fax +212 - 22 26 00 06
    Email somara@somara.ma

    Kjaerulff 1 AB
    Ridbanegatan 4, Box 9076
    200 39 Malmø, Sverige
    Tel +46 - 4 06 79 74 00
    Fax +46 - 4 06 79 74 01
    Email Sweden@kjaerulff1.com

    CableCom AS
    Ostre Kullerod 5
    3241 Sandefjord, Norge
    Tel +47 - 33 48 33 48
    Fax +47 - 33 44 60 44
    Email odd@cablecom.no

    BaSys Czech & Slovak s.r.o.
    Stará Vajnorská 17/A
    831 04 Bratislava, Slovakia
    Tel + 421 2 49 10 66 18
    Fax + 421 2 49 10 66 33
    Email: loewe@basys.sk
    ENKAY ELEKTRONIK SAN. Ve Tic.
    Ltd. Sti.
    Alemdag Cad: Site Yolu No.: 10
    81230 Ümraniye/ Istanbul, Türkiye
    Tel +90 - 216 634 44 44
    Fax +90 - 216 634 39 88
    Email mhatipog@enkaygroup.com

    Loewe Opta France S.A.
    13 rue du Dépôt,
    Parc del l‘Europe, BP 10010
    67014 Strasbourg Cédex, France
    Tel +33 - 3- 88 79 72 50
    Fax +33 - 3- 88 79 72 59
    Email loewe.france@wanadoo.fr

    PL Trading (pz 2004) Ltd.
    27, Aliat Hanoar St.
    Givataiim 53401, Israel
    Tel +972 - 3 - 57 27 155
    Fax +972 - 3 - 57 27 150
    Email zeev@loewe.co.il

    International Dynamics (NZ) Pty
    Ltd
    PO Box 109 317, Newmarket
    Auckland, New Zealand
    Tel +64 9 379 0179
    Fax +64 9 379 0279
    Email: enquiries@international
    dynamics.co.nz

    Kjaerulff 1 OY
    Uudenmaantie 100
    20760 Piispanristi, Finland
    Tel +358 - 20 751 3800
    Fax +358 - 20 751 3801
    Email jari@kjaerulff1.com

    Origo Ltd
    Unit 23 Magna Drive
    Magna Business Park, City West
    Dublin 24, Republic of Ireland
    Tel +353-1-4666700
    Fax +353-1-4666706
    Email service@origo.ie

    Mayro Magnetics Portugal, Lda.
    Rua Professor Henrique de Barros
    Edifício Sagres, 2º. C
    2685-338 Prior Velho, Portugal
    Tel +351 - 21 942 78 30
    Fax +351 - 21 942 78 30
    Email geral.loewe@mayro.pt

    Loewe UK Limited
    Century Court, Riverside Way
    Riverside Business Park, Irvine,
    Ayrshire
    KA11 5DD, UK
    Tel +44 - 1294 315 000
    Fax +44 - 1294 315 001
    Email enquiries@loewe-uk.com

    SAS
    Hamad Al Haqueel Street,
    Rawdah, Jeddah
    Kingdom of Saudi Arabia
    Tel +966 (2) 665 4616 ext: 666
    Fax +966 (2) 660 7864
    Email hrant@sas-syseng.com

    DSV TRADING SA
    Plac Kaszubski 8
    81-350 Gdynia, Polska
    Tel +48 - 58 - 6 61 28 00
    Fax +48 - 58 - 6 61 44 70
    Email market@dsv.com.pl

    Dubai Audio Center
    P.O. Box 32836, Sheik Zayed Road
    Dubai, UAE
    Tel +971 - 4 343 14 41
    Fax +971 - 4 343 77 48
    Email dacdubai@emirates.net.ae
    THE SOUNDLAB (PTY) LTD
    P.O. Box 31952, Kyalami 1684
    Republic of South Africa
    Tel +27 - 1 14 66 47 00
    Fax +27 - 1 14 66 42 85
    Email loewe@mad.co.za

    © by Loewe Opta 071218
    70



  • Page 71

    Glossary
    A
    AV socket: Audio and video signal.
    AV sources: Audio/video source.
    AVS: Audio/video front sockets on the TV set (cinch and Mini-DIN).
    C
    Cinch cable: Cable for transmitting sound or picture.
    Component Signal: Video signal which is transmitted by three separate cinch
    connections. It is made up of the brightness signal “Y” and the colour difference
    signals “Pb” and “Pr”. YPbPr is the original analogue version of the digital YcbCr
    in which the video data stored on the DVD are colour coded.
    D
    Digital Link: System for controlling recorders (for Loewe video recorders and DVD
    recorders) via the Euro AV sockets of the Loewe TV set when installed in a concealed
    place. Control of the recorder for timer recordings.
    Digital Link Plus: System for controlling recorders according to protocol 50. Station
    and timer data are transmitted to the recorder via the Euro AV socket for analog
    stations. The time recording is made exclusively by the recorder. Different names
    at different manufacturers.
    DTS: Digital multi-channel sound.
    Dolby Digital: Digital multi-channel sound.
    Dolby Pro Logic: Analog multi-channel sound.
    Dolby Surround: is an analog multi-channel sound system which accommodates
    four audio channels in two sound tracks using a matrix coding.
    DVD: abbreviation for Digital Video Disc and later Digital Versatile Disc.
    DVD-Preceiver: combi-device of DVD player and radio.
    DVI: Digital Visual Interface is an interface for transmitting digital video and graphic
    data (without sound).
    E
    Euro AV socket: Interface for connecting video recorders to a TV set. This socket
    is also known as a Scart socket.
    F
    Finalising: Finishing the disc for playing on other players.
    H
    HDCP: Copy protection standard.
    HDD: (hard disc) Integrated hard disc.
    HDMI: High Definition Multimedia Interface is a newly developed interface for full
    digital transmission of audio and video data.
    I
    Initialising: Preparing the disc for recording video signals.
    L
    LCD: Liquid Crystal Display.
    L-Link: Interface for detection and control of Loewe audio components.

    M
    MPEG: Digital compression method for video.
    Modulator: Transmitter in the recorder to receive signals via the TV tuner.
    Mono: single channel sound.
    N
    NICAM: Sound standard NICAM is used in Belgium, Denmark, England, France,
    Sweden and Spain.
    NTSC: American color standard.
    P
    PAL: European colour standard.
    PCM: Puls Code Modulation for digital sound.
    PIP: Picture in Picture, a function which shows two pictures on one screen.
    Progressive Scan: Technique for setting up images with real full images for
    flicker-free display.
    Picture In Picture: see PIP.
    R
    RGB: colour signals red, green, blue.
    S
    Switching voltage: Video devices transmit this voltage to switch the TV to play.
    SECAM: French colour TV standard.
    SetTop-Box: (STB) Accessory connected to the TV set which enables additional
    functions.
    Signal strength: strength of the reception signal.
    Signal quality: quality of the incoming signal.
    Stereo: dual channel sound.
    T
    Terrestrial: In data transmission, a radio transmission which does not use a satellite
    as an intermediate station is called terrestrial.
    Tuner: receiver
    U
    USB: Universal Serial Bus. Serial bus system for connecting external devices (USB
    card reader, USB stick).
    V
    VPS: The Video Program System (VPS) is a signal which some (but not all) stations
    transmit in the scanning gap of the TV signal. The signal serves for video or DVD
    recorders to react to differences in the starting time, postponements and overrunning of the planned transmission time when recording programs.
    Y
    Ycc/Ypp: colour standard in Set-Top-Boxes.

    71 -






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Loewe Viewvision DR DVB-T wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Loewe Viewvision DR DVB-T in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 13,16 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Loewe Viewvision DR DVB-T

Loewe Viewvision DR DVB-T Bedienungsanleitung - Deutsch - 71 seiten

Loewe Viewvision DR DVB-T Bedienungsanleitung - Holländisch - 68 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info