495200
2
Zoom out
Zoom in
Vorherige Seite
1/15
Nächste Seite
Vibration Driver Installation for PC
(1) Installing the dedicated Vibration Driver (For PC vibration feedback only)
Note: You must install the driver before connecting your Action Pad
1. Turn on your computer and log onto Windows.
2. Insert the driver disk to your selected CD drive. The Set-up screen will pop up automatically.
3. Follow the instructions on screen. Restart your computer if prompted.
4. Plug the Action Pad into a spare USB port on your computer.
5. Installation is completed.
(2) Verifying Installation:
1. Click “Start” in the lower left corner of your desktop.
2. Click “Setting” and then “Control Panel”
3. Now Double Click the “Game Controllers” icon (different Windows platforms may have different names).
You should see the driver named “PC Twin Shock under Controller Tab with an “OK” status.
4. Select “PC Twin Shock” and then click the properties tab, you will now enter the “Driver Test” screen.
5. Go to the “Function Test” Tab and test all of the axes/ buttons/switches on the Test screen by activating
the corresponding axes/buttons/switches of the pad.
6. Go to the “Vibration Test” screen by clicking the “Vibration Test” Tab on the top part of the screen.
Different kinds of vibration effects can be tested.
7. Your installation is successful if you can go through all the above points without any problems.
8. Click “OK” to exit.
System Requirements
PC with a USB port
Windows 98SE / ME / 2000 / XP / Vista / Windows 7 (32 & 64 bit)
Over 200MB free hard disc space
CD ROM driver
32MB or higher memory
Support DirectX VGA card
PC platform: Pentium (R) - 1.8GHz/ RAM: 256M
Should you have any setup problems with the Action Pad (JP284) please contact our Technical Support Hotline
on +44 (01923)471000 National/International call rates apply or Email support@logic3.com - Spare parts
are available for some models at our website www.logic3.com
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Logic3 Action Pad - JP 284 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info