538849
1
Zoom out
Zoom in
Vorherige Seite
1/3
Nächste Seite
Charge the Keyboard Case
Plug the micro-USB cable into the micro-USB
port on the Keyboard Case. Plug the other
end of the cable into a powered USB port on
a computer.
Power on the Keyboard Case and
pair with iPad2
The Keyboard Case’s Bluetooth keyboard should
only need to pair to your iPad 2 once as follows:
1. On the Keyboard Case, slide the power
switch on. The status light illuminates for four
seconds, and then it turns o.
2. On the iPad 2, select Settings > General >
Bluetooth > On.
3. Press the Connect button to make the
Keyboard Case discoverable. The status light
flashes on the Keyboard Case, and the iPad 2
displays “Logitech Keyboard Case” as an
available device.
4. Select “Logitech Keyboard Case” on the
iPad 2. The iPad 2 will display a code.
5. Type the code using the Keyboard Case and
press Enter. The Keyboard Case is now paired
to the iPad 2.
Position the iPad2 on the
Keyboard Case
Place the iPad 2 (either in portrait or landscape
mode) into the central groove.
Special function keys
The Keyboard Case has special function keys to
give you more control of your iPad 2.
Home Displays the iPad 2 home screen
Search Displays the iPad 2 search screen
Slide-show Plays a slide-show of
saved pictures
Keyboard hide/show Allows you to hide
or show iPad 2 on screen keyboard
Cut (Command-X)
Copy (Command-C)
Paste (Command-V)
Previous track Skips to previous track on
current playlist
Play/Pause Starts or stops current playlist
Next track Skips to the next track on the
current playlist
Mute Mutes iPad 2 audio
Volume down Decreases iPad 2 volume
Volume up Increases iPad 2 volume
Black screen Makes the iPad 2 screen
go dark or restores the screen when
pressed again
International Keyboard Toggles between
international keyboards
Lights and buttons
Charging light: turns on when charging and
turns o when fully charged
Status light:
1. Flashes when the battery is low (there’s
about a 20% charge and two to four days of
use remaining)
2. Flashes when pairing
3. Lights briefly when you turn on the Keyboard
Case, and then it turns o
Central groove
Bluetooth button
Status light
Charging light
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Logitech Keyboard Case by ZAGG for iPad 3 - 4 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info