Bedienungsanleitung Logitech Transporter (Seite 17 von 21) (Englisch)

64792

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

32 Logitech

33Transporter

™

Owner’s Guide

• Storage temperature range -20° to 45° C (-4° to 113° F)

• Maximum humidity (operating) 95%

Troubleshooting

The following tips and answers to frequently asked questions will help resolve problems

you may encounter. You can ﬁ nd answers to additional questions on our web site at

http://faq.slimdevices.com/.

How do I get back to the Transporter Setup menu?

Press and hold the

LEFT arrow for ﬁ ve seconds to bring Transporter back to the setup menu.

How do I reset Transporter to factory default settings?

Plug the power connector into Transporter while holding down the

ADD button on the remote

until you see Factory Reset followed by the Welcome To Transporter prompt.

The player doesn’t obtain an IP address.

Check all your network connections, and make sure that the DHCP server is running. Try a

different ethernet cable, even if the hub indicates a good link. Make sure you are using the

latest ﬁ rmware for your router or access point.

Can I connect Transporter directly to my computer?

You can connect Transporter directly to your computer (without a local network or hub) using

an ethernet crossover cable. You can purchase a crossover cable at most retail computer

stores. Conﬁ gure your network adaptor and Transporter with static IP addresses so that they

can ﬁ nd each other. Visit

http://faq.slimdevices.com and search for crossover for additional

information.

I can’t enter my wireless password.

If your network is using WEP encryption, you’ll need the hexadecimal WEP key for your

wireless network. Hexadecimal keys are either 10 or 26 digits of 0-9 or the letters A to F. Some

wireless access points or routers use text passwords for WEP. The conﬁ guration software for

your wireless device can show the key in hexadecimal. Airport users can use Airport Admin

Utilities. Use the Base Station menu to ﬁ nd the Equivalent Network Password and use the value

displayed.

The web interface won’t come up, even though Transporter is working.

Try using the following URL:

http://127.0.0.1:9000/. (Be sure to type the “http://” part, as

some versions of Internet Explorer require it when accessing a URL by IP address.)

My Transporter is not seen by SlimServer (“Player not found”) but it does appear to

be working properly.

Your Transporter is probably connected to SqueezeNetwork, rather than your local SlimServer.

To tell if this is the case, go to the main menu (tap the LEFT arrow a couple of times), and see

if the ﬁ rst line of the display says “SqueezeNetwork (X of Y)”. If it does, press down until you

see Sign Off and press the

RIGHT arrow.

How do I ﬁ nd the IP address of the computer where I have installed SlimServer?

On Windows: Click Start > Run, type in cmd and hit enter. In the DOS window, type ipconﬁ g

and hit enter.

On Mac OS X: Go to System Preferences > Network. Under the ‘Show:’ drop-down, pick the

network interface you are using, then click TCP/IP. Your IP address will be displayed.

On Linux or UNIX: Open up a shell and type ifconﬁ g and hit enter.

Transporter can’t connect to my computer running SlimServer.

This could be due to a ﬁ rewall being active on the computer.

Macintosh: You will have to create a new exception in the built-in ﬁ rewall to allow the

Transporter to connect to SlimServer. To do this:

1. Open System Preferences > Sharing, and click ‘Firewall’

2. Click ‘New...’ to create a new rule

3. For ‘Port Name:’ choose ‘Other’

4. For ‘Port Number, Range or Series:’ type ‘3483, 9000’

5. For ‘UDP Port Number(s):’ specify ‘3483’ (Mac OS 10.4 only)

6. For ‘Description:’, type ‘SlimServer’

7. Click OK, and ensure that your new exception is checked on

Windows: Windows XP Service Pack 2 turns on a built-in ﬁ rewall by default. You will need to

conﬁ gure the ﬁ rewall to allow access to SlimServer. To do this:

1. Go to Control Panel

2. Click Security Center

3. Click Windows Firewall under ‘Manage security settings for:’

4. Click the Exceptions tab

Add an exception for the following three ports by clicking ‘Add Port...’:

• Port number: 3483 (TCP) - Name: SlimServer Control

• Port number: 3483 (UDP) - Name: SlimDiscovery

• Port Number: 9000 (TCP) - Name: SlimServer Web

Third-Party Firewalls: Instructions for conﬁ guring common ﬁ rewall applications,

including Norton Personal Firewall, Norton Internet Security, ZoneAlarm, McAfee Security

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Logitech Transporter Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info