593748
4
Zoom out
Zoom in
Vorherige Seite
1/4
Nächste Seite
NECESSARY PROCEDURE AFTER
BATTERY CHANGE
After the battery is changed with a new one or
in case any one of the hands should move improperly,
follow the procedure below to reset the circuit
of the built-in IC.
1. Turn the crown to set the mode indicator to
“TIME”.
2. While depressing buttons “A” and “B” at the
same time, turn the crown to set the mode
indicator to “TIME ” or “CHRONO.”. The
circuit of the built-in IC will be reset.
Note: Before using the watch, be sure to adjust
the hand position in the “ Ø ” mode,
and then set the time, date and alarm.
(See “ADJUSTING THE HAND POSITION”,
“HOW TO SET THE TIME”, “HOW TO
SET THE DATE” and “HOW TO USE THE
ALARM”.)
• ANTI-MAGNETIC
Your watch will not be affected by magnetism
generated by household electric appliances.
• ANTI-SHOCK
Your watch may be worn for normal sports
activities, but be careful not to drop it or hit it
on hard surfaces.
• TEMPERATURE
Your watch is preadjusted that constant accuracy
may be insured at normal temperature.
2. Service:
If your LORUS watch requires repair or servic-
ing, send it to the Authorized Lorus Service
Center below:
COSERV
P.O. Box 677
Mahwah, NJ 07430
For local repair service in California, please
consult the Yellow Pages of your local telephone
directory.
When you send your Lorus watch for service
under warranty to the address above, please
enclose a $4.00 check or money order (payable
to COSERV) to cover the cost of handling.
Because of possible loss, we recommend in-
suring your watch when using the mails.
Never include a special watchband or gift
box in your shipment.
As a convenience in obtaining service at the
Authorized Lorus Service Center listed above,
participating Lorus retailers will be pleased
to provide you with a free, pre-addressed
Watch Service Mailer.
CARE AND SERVICE OF YOUR
LORUS WATCH
1. Care:
• WATER RESISTANT
Your watch is classified into one of the follow-
ing four groups by the degree of water resis-
tance. Please read the appropriate item below
for proper use.
If your watch is water resistant, “WATER RESISTANT”
is shown on the back of your watch case. If
your watch is 100m or 50m water resistant, it is
so indicated on the dial. If your watch is non-
water resistant, there is no such indication.
Water resistant: These watches are designed
to withstand accidental contact with water, for
example, splashes or rain, but should not be
worn while swimming or diving.
Water resistant (50m): These watches are
suitable for swimming and can be worn in the
shower, but not for diving.
Water resistant (100m): These watches
are suitable for swimming or skin diving (with-
out heavy breathing apparatus), but not for
scuba diving.
Non-water resistant: Care should be taken
not to get your watch wet as water may damage
the movement.
Do not depress any buttons or turn the crown
when the watch is wet.
If the watch is exposed to salt water, rinse it
in fresh water and then wipe it thoroughly
dry.
1. Pry up the adjusting flap with a small screw-
driver or something with a sharpened tip.
2. Slide the clasp to adjust it to a desired size.
3. Close the adjusting flap.
HOW TO ADJUST BAND LENGTH
• Sliding clasp band
BATTERY CHANGE
The miniature battery SEIKO SR927W, MAXELL
SR927W, SONY SR927W or EVEREADY 399, which
powers your watch should last approximately 2
years. However, because the battery is inserted
at the factory, the actual life of the battery once in
your possession may be less than 2 years. Be sure
to replace the battery to prevent any possible
malfunction as soon as it runs down.
To replace the battery, we recommend taking the
watch to a local watch repair shop.
Note: If the stopwatch is used for more than 5
minutes a day, the timer for more than 5
minutes a day and/or the alarm for more
than 15 seconds a day, the battery life may
be less than the specified period.
A B
Crown
Mode indicator
Please complete, detach, and enclose
The dealer is required to endorse this guarantee
before it becomes valid.
Printed in Japan
Date of purchase
Instruction & Warranty Booklet
MEN’S ANALOGUE
ALARM CHRONOGRAPH
RWF Series (Cal. N945)
11-91 198L1
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

lorus-n945

Suche zurücksetzen

  • wo bekomme ich die bedienunngsanleitung für die Uhr N945 7A10 her , danke Eingereicht am 18-4-2017 19:35

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lorus N945 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info