Bedienungsanleitung Lorus V52H (Seite 1 von 3) (Englisch)

593793

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

■ CHARACTERISTICS

1. Time:

•Analogue display: Hour, minute and

second hands.

•Digital display: Hour and minutes.

The digital time is displayed in the 24-

hour indication.

* Digital display is located at the 4 o’clock

side of the watch to provide easy view

when the watch is worn on the wrist.

2. Calendar: Month and date are shown in

the digital display.

The calendar adjusts automatically for odd

and even months except February of leap

years.

3. Dual time: Besides the time of your

area, time of an area in a different time

zone can be set. The calendar changes

correspondingly with the digital time.

4. Countdown timer: Up to 12 hours can

be set in minute increments.

As soon as the time is set for the timer, it

automatically starts counting down.

INSTRUCTION MANUAL

CAL. V52H (R23 SERIES)

06-98

NREV52H

■ DISPLAY AND CROWN/BUTTONS

Button B

Digital display

Button A

Hour hand Minute hand

Second

hand

Crown

Extended

position

Normal

position

The selection of the mode is made in the

following order with each press of button

“B”.

CALENDAR mode TIME mode

➡➡

TIMER mode

■ HOW TO SET THE TIME

Note: The analogue hands move independently

of the digital time. When using the

watch, therefore, be sure to set both

the analogue time and digital time.

1. Pull out the crown when the second hand

is at the 12 o’clock position. The second

hand will stop on the spot.

2. Turn the crown to set the hour and minute

hands to the desired time.

* When setting the minute hand, first advance

it 4 to 5 minutes ahead of the desired

time and then turn it back to the exact

minute.

3. Push the crown back in to the normal position

in accordance with a time signal.

Normal

position

Extended

position

Crown

Analogue time setting

Hour

Minutes

1. Press button “B” to show the TIME mode.

2. Press button “A” for 2 seconds to show

the TIME SETTING display. The hour

digits start flashing.

3. Press button “B” to set the hour digits.

* The digital time is displayed only in the

24-hour indication.

4. Press button “A” to select the minute digits

(flashing).

5. Press button “B” to set the minute digits.

6. Press button “A” in accordance with a

time signal to return to the TIME mode.

The seconds are reset to “0” and start

immediately.

Note: The flashing digits move quickly by

keeping button “B” pressed.

Digital time setting

How to use the dual time

• Equipped with two time displays, namely,

analogue and digital displays, the watch

can show the time of an area in a different

time zone besides the time of your area.

Method I :

Set the time of your area on the analogue

display while setting the time of an area in a

different time zone on the digital display.

Method II:

Set the time of your area on the digital display

while setting the time of an area in a different

time zone on the analogue display.

* For setting the analogue and digital times,

see “Analogue time setting” and “Digital

time setting”, respectively.

Note: The calendar changes correspondingly

with the digital time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lorus V52H Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info