Bedienungsanleitung Lorus W100 (Seite 2 von 3) (Englisch)

593843

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

Auto Start Function

• By setting the amount of time before measurement

is started, the stopwatch starts automatically

at a desired time.

• Up to 15 minutes and 59 seconds can be set

in seconds.

Note: The auto start function and timer cannot

be used simultaneosly.

1) Auto start time setting

3. If the watch is left untouched in the alarm

setting display with the digits flashing, it

will automatically return to the alarm display

in 2 minutes.

Hourly time

signal mark

• With each press of button “B” in the alarm

display, the engagement and disengagement

of the alarm and hourly time signal are

made as follows.

Engagement/disengagement of the

alarm and hourly time signal

■ HOW TO SET THE DUAL TIME

Time of a different time zone can be set and

displayed together with the time you have set

in “HOW TO SET THE TIME/CALENDAR”.

• At the designated time, the alarm rings

and the display is illuminated for 20 seconds

and stops. To stop them manually, press

button “A”, “B” or “C”.

• The alarm can be tested by keeping button

“C” pressed in the alarm display.

Neither engaged

Alam engaged

Both engaged

Hourly time signal engaged

Alarm mark

Dual time

display mark

“A” (AM)/“P”

(PM) mark

Hour

Minutes

1. Press button “A” to show the time/calendar

display.

2. Press button “B” to show the dual time

display. With each press of the button,

the display changes over between the time/

calendar and dual time alternately.

3. Press button “A” for 2 seconds to show the

dual time setting display.

4. To set the digits, refer to “HOW TO SET

THE TIME/CALENDAR”.

1. After stopping the stopwatch or resetting

it, press button “A” for 2 seconds to show

the auto start time setting display. The

minute digits start flashing.

2. Press button “B” to select the digits to be

adjusted (flashing).

Minutes Seconds

3. Press button “C” to set the flashing digits.

One digit is advanced with each press of

the button. The digits move quickly by

keeping the button pressed.

4. After all the adjustments are completed,

press button “A” to show the auto start

display. The auto start time you have set

remains displayed in the upper row.

Note: If the watch is left untouched in the auto

start time setting display with the digits

flashing, it will automatically return to

the auto start display in 2 minutes.

SecondsMinutes

2) How to use the auto start function

Stopwatch

measurement

Auto start time

(countdown)

1. Press button “B” in the auto start display.

The countdown of the set time will be

started. With each press of the button,

the countdown is started and stopped alternately.

The stopwatch starts measuring when the

set time is up.

* At 3, 2 and 1 minutes, 30, 20, 10, 3, 2 and

1 seconds before the stopwatch measurement

is started, a beep sounds and the light

illuminates.

2. After the stopwatch is started, operate the

buttons as explained in “Stopwatch Operation”.

1. Press button “A” to show the alarm display.

2. Press button “A” for 2 seconds to show the

alarm setting display. The hour digits

(and “A”/“P” mark if the time is set in the

12-hour indication) start flashing.

3. Press button “B” to select the digits to be

adjusted (flashing).

Notes:

1. When the time function is displayed in the

24-hour indication, the alarm is also displayed

in the 24-hour indication.

2. When setting the hour digits in the 12-

hour indication, check that “A” (AM)/“P ”

(PM) mark is correctly set. In the 24-hour

indication, there is no indication.

■ HOW TO SET THE ALARM

Alarm display markMinutesHour

“A”(AM)/

“P” (PM)

mark

Hourly time

signal mark

Alarm

mark

4. Press button “C” to set the digits. One

digit is advanced with each press of the

button. The digits move quickly by keeping

the button pressed.

5. After all the adjustments are completed,

press button “A” to return to the alarm

display.

MinutesHour

• Two types of timers (adjustable timer and

preset timer) are available.

1. How to Use the Preset Timer

• Five different lengths of time (3, 10, 15, 30

and 45 minutes) have been preset for the

timer.

Selection of the preset time

1. Press button “A” to show the timer display.

2. Press button “C” to select the desired preset

time. Selection of the preset time is made

in the following order by pressing button

“C”.

15 min.30 min.45 min.

10 min.3 min.

Preset timer operation

Press the button in the following order.

Time-up

Stop

Restart

Warning

sound

beeps

Start

Restart and stop of the

timer can be repeated by

pressing button “B”.

Adjustable

timer

Timer display

mark

Hour

Minutes

■ HOW TO USE THE COUNTDOWN

TIMER

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lorus W100 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info