Bedienungsanleitung Lorus W160 (Seite 2 von 3) (Englisch)

593858

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

* The cities marked with “*” use daylight saving

time (summer time).

GMT = Greenwich Mean Time

TIME DIFFERENCES

Note: The time differences and use of daylight

saving time may change in some areas

or countries when they are so decided

by the countries concerned.

■ HOW TO USE THE MEMO FUNCTION

• A 3-channel memo function is provided to

• Up to 40 characters can be entered for

each memo.

Memo channel No.

To enter the memo

1. Press button “A” to show the MEMO mode.

2. Press button “C” to select the desired memo

channel in the following order.

CH-3CH-2

CH-1

3. Press button “A” for 2 to 3 seconds to

show the memo entry display. The flashing

cursor appears at the left end of the upper

row.

4. Press button “C” or “D” to select the character

to be entered. Characters move quickly

by keeping the respective buttons pressed.

5. Press button “B” to enter the desired characters.

6. Repeat the steps “4” and “5” above until

the desired memo is entered.

7. Press button “A” to return to the MEMO

mode.

Notes:

1. If the watch is left untouched in the memo

entry display with the cursor flashing, it

will automatically return to the MEMO mode

in 2 minutes.

2. To protect the registered memos from damage

or loss in case of accident, malfunction,

repair, loss or theft of the watch, be sure

to keep data sources such as business cards

or note down the memos in a note book or

the like.

Please note that we are not liable for any

damage or lost profits resulting from the

use of this watch and the loss or change of

the registered data caused by malfunction

or repair of the watch. We will not accept

any claim for recovery of such damage or

lost profits made by any third party.

■ HOW TO SET THE ALARM

Minutes

Hour

Hourly time

signal mark

Alarm

mark

1. Press button “A” to show the ALARM mode.

2. Press button “A” for 2 seconds to show the

alarm setting display. The hour digits

(and PM mark if the time is set in the 12-

hour indication) start flashing.

3. Press button “B” to select the digits to be

adjusted (flashing).

MinutesHour

4. Press button “C” or “D” to set the digits.

One digit is increased or decreased with

each press of button “C” or “D”, respectively.

The digits move quickly by keeping the

respective buttons pressed.

* Pressing button “C” will increase the digits

while pressing button “D” will decrease

them.

5. After all the adjustments are completed,

press button “A” to return to the ALARM

mode.

GMT ± (hours)

Abbreviation displayed

Name of city or area

0 LON London*

+ 1 PAR Paris*

+ 1 ROM Rome*

+ 1 BER Berlin*

+ 2 IST Istanbul*

+ 3 MOW Moscow*

+ 4 DXB Dubai

+ 5 KHI Karachi

+ 6 DAC Dacca

+ 7 BKK Bangkok

+ 8 BJS Beijing

+ 9 TYO Tokyo

+10 SYD Sydney*

+11 NOU Noum a

+12 WLG Wellington*

–10 HNL Honolulu

– 9 ANC Anchorage*

– 8 LAX Los Angeles*

– 7 DEN Denver*

– 6 CHI Chicago*

– 5 NYC New York*

– 4 CCS Caracas

– 3 RIO Rio de Janeiro*

– 1 PDL Azores*

“ON”/“OFF”

(Alarm

engagement/

disengagement

mark)

Types of characters

The following characters can be used to enter

the memo.

• English capital letters: A B C D E F G H I

J K L M N O P Q R S T U V W X Y Z

• Numerals and symbols: 1 2 3 4 5 6 7 8 9 0

! ? @ # + / = % ' " < > – _ : ; · , .

To display the memo

After selecting the memo channel containing

the desired memo, press button “D”. The

entered memo scrolls once, and then, its first

four characters remain displayed.

Notes:

1. When the time function is displayed in the

24-hour indication, the alarm is also displayed

in the 24-hour indication.

2. When setting the hour digits in the 12-

hour indication, check that AM/PM is properly

set. Only “PM” mark is displayed and

there is no indication for the AM setting.

In the 24-hour indication, “24H” is displayed.

3. If the watch is left untouched in the alarm

setting display with the digits flashing, it

will automatically return to the ALARM

mode in 2 minutes.

Engagement/disengagement of the

alarm and hourly time signal

• With each press of button “C” in the ALARM

mode, the engagement and disengagement

of the alarm and hourly time signal are

made as follows.

Hourly time

signal mark

Alarm mark

4 Neither engaged

Alarm engaged

Both engaged

Hourly time signal engaged

• The alarm rings at the designated time for

20 seconds and stops. To stop it manually,

press any of the buttons.

• The alarm can be tested by keeping button

“C” pressed in the ALARM mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lorus W160 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info