Bedienungsanleitung Lorus W240 (Seite 3 von 3) (Englisch)

593861

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

5. After all the adjustments are completed, depress

button “B” to return to the alarm display.

The alarm mark and “on” mark are automati-

cally displayed.

Notes:

1. When the time function is displayed in the 24-

hour indication, the alarm is also displayed in

the 24-hour indication.

2. When setting the hour digits in the 12-hour

indication, check that “A”(AM)/“P”(PM) mark

is properly set. In the 24-hour indication, there

is no indication.

3. If the watch is left untouched in the alarm

setting display with the digits flashing, it will

automatically return to the alarm display in 2

to 3 minutes.

■ CARE OF YOUR LORUS WATCH

• BATTERY

CAUTION

Do not expose the old battery to fire

or recharge it. Keep it at a place

beyond the reach of children. If a

child swallows it, consult a doctor

immediately.

• WATER RESISTANT

indication

WATER

RESISTANT

WATER

RESISTANT

(50 M/5 BAR)*

WATER

RESISTANT

100 M/

10 BAR or

above

Condition

of use

Accidental

contact with

water, such

as splashes

and rain

Swimm-

ing and

taking a

shower

Skin

diving

Scuba

diving

Indica-

tion on

the dial/

case back

NO NO NO

YES

YES NO NO

YES NO NO NO

YES YES YES NO

()

* If your watch is 200 M/20 BAR, 100 M/10 BAR

or 50 M/5 BAR water resistant, it is so indicated

on the dial/case back.

• At the designated time, the alarm rings and the

display is illuminated alternately for 20 seconds

and stop. To stop it manually, depress button

“A”, “B”, “C”, “D” or “E”.

Turning on/off of the hourly time signal

and confirmation sound; and alarm test

• With each depression of button “C” in the time/

calendar display, the hourly time signal and

confirmation sound for the button operation are

turned on and off alternately.

Engagement/disengagement of the alarm

• With each depression of button “C” in the alarm

display, the alarm is engaged and disengaged

alternately.

Alarm disengaged

Alarm engaged

Hourly time signal and confirma-

tion sound turned on

Hourly time signal and confirma-

tion sound turned off

• The alarm can be tested by keeping buttons “C”

and “D” depressed in the time/calendar display.

* After the alarm sound is tested, be sure to

check turning on/off of the hourly time signal

and confirmation sound, as they are turned on

and off alternately by depressing button “C”.

■ LORUS LITE

When button “E” is depressed and released in

the time/calendar, stopwatch, stroke, timer or

alarm display, the electroluminescent light evenly

illuminates the display for 3 seconds for easy

viewing in the dark.

• Do not operate the buttons when the watch is

wet.

• If the watch is exposed to salt water, rinse it in

fresh water and then wipe it thoroughly dry.

Caution:

Leather straps are not water resistant except so

indicated, even if the watch head is water resistant.

• ALLERGIC REACTION

Because the case and band touch the skin

directly, it is important to clean them regularly.

If not, shirt sleeves may be stained and those

with delicate skin may develop a rash. Please

wear the watch with some play to avoid any

possible allergic reaction. If you develop a

rash on your wrist, stop wearing and consult

a physician.

• MAGNETISM

Your watch will not be affected by magnetism

generated by household electric appliances.

• SHOCKS AND VIBRATIONS

Your watch may be worn for normal sports

activities, but be careful not to drop it or hit it

on hard surfaces.

• TEMPERATURE

Your watch is preadjusted so that constant

accuracy may be insured at normal tempera-

ture.

Notes:

1. LORUS LITE watches work with one battery.

When the electroluminescent light begins to

lose its luminance, this is an indication that

the battery is depleted. We recommend that

you change the battery before the watch itself

stops.

2. If the electroluminescent light is used conti-

nuously for a long time, the battery life may

be less than the specified period.

■ BATTERY CHANGE

The miniature lithium battery Matsushita CR1620

(for Cal. W240)/SEIKO CR2025, SONY CR2025 or

Matsushita CR2025 (for Cal. W620), which powers

your watch should last approximately 2 years.

However, because it is inserted at the factory, the

actual life of the battery once in your possession

may be less than 2 years.

Be sure to replace the battery to prevent any possible

malfunction as soon as it runs down. To replace

the battery, we recommend taking the watch to a

local watch repair shop.

Notes:

1. If the stopwatch and timer are used simultaneously

for more than 10 hours a day, the alarm for

more than 10 seconds (for Cal. W240)/20 seconds

(for Cal. W620) a day, the illuminating light

more than 2 times (for Cal. W240)/3 times (for

Cal. W620) a day and/or the confirmation sound

more than 50 times a day, the battery life may

be less than the specified period.

2. After the battery is replaced with a new one, be

sure to depress buttons “A”, “B”, “C” and “D”

at the same time for 2 to 3 seconds. The display

becomes blank, and when the buttons are released,

the time/calendar of “A 12:00oo SA 1-1” is displayed.

Then, set the desired time/calendar and alarm

time. (See “HOW TO SET THE TIME/CALENDAR”

and “HOW TO SET THE ALARM”.)

■ NOTE ON UNUSUAL DISPLAY

While in the time/calendar setting display, the

display as shown below will appear if both buttons

“C” and “D” are depressed at the same time. This

is not a malfunction. Depress button “A”, “B”,

“C”, “D” or “E” to return to the time/calendar

display, and then set the time/calendar again.

[All the segments lighting up]

NR2AQ

10-94 112L1

■ LUMIBRITE WATCH

(dial, hands, buttons, case, bezel, strap, etc.)

✩ If your watch is a LORUS LUMIBRITE watch, it

has following features.

LORUS LUMIBRITE watches absorb and store light

energy from natural and artificial light sources

and emit light in the dark. They are made of

environmentally friendly material, and therefore,

are harmless to human beings and the environment.

• With a full charge, LORUS LUMIBRITE watches

glow in the dark hours longer than conven-

tional luminous watches of this type. If ex-

posed to a light of more than 500 lux (i.e., the

brightness of a typical office) for approximate-

ly 10 minutes, or direct sunlight for 2 minutes,

they will glow for hours.

• Since LORUS LUMIBRITE watches emit the light

they store, the brightness will decrease gradually

over time. The length of time they will glow

may also differ slightly depending on such factors

as the brightness of and distance from the light

source used to charge the watch.

When your LORUS watch requires repair or

servicing, please see the enclosed WARRANTY/

GUARANTEE.

■ SERVICE

Printed in Hong Kong

Lorus W240 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info