Bedienungsanleitung Lorus Y704A (Seite 1 von 3) (Englisch)

593879

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

■ CHARACTERISTICS

1. Time display: Hour, minutes and sec-

onds.

2. Calendar display: Month, date and day

of the week.

3. Automatic calendar adjustment: Cal-

endar adjusts automatically for odd and

even months except February of leap years.

4. Time indication: Changeover between

12-hour and 24-hour indications is pos-

sible.

5. Stopwatch: 24 hour stopwatch with 1/

100 second readout up to 30 minutes and

with 1 second readout after the first 30

minutes. Split time measurement is avail-

able.

6. Alarm: The alarm rings at the desig-

nated hour and minute for 1 minute.

7. Snooze function: The alarm starts ringing

again 5 minutes after it is stopped.

8. Hourly time signal: Can be set to ring

every hour on the hour with a single “beep”.

Button B : • Calendar (month, date and day)

display in the time display.

• Start/stop in the stopwatch func-

tion.

• Setting the digits in the alarm

setting and the time/calendar

setting functions.

• Activating the snooze function

while the alarm is ringing.

Button C : • Alarm display in the time dis-

play.

• Split/Split release/Reset in the

stopwatch function.

• Selection of the digits to be ad-

justed in the alarm setting and

the time/calendar setting func-

tions.

• Stopping the alarm in any dis-

play.

Minutes Seconds

1 Depress button “A” to show the stopwatch

display. (The stopwatch indicator starts

flashing.)

The stopwatch can measure up to 24 hours

and is displayed in minutes, seconds, and

1/100 seconds up to 30 minutes, and in

hours, minutes, and seconds after the first

30 minutes. (The 1/100 second indicator

flashes during the first 30 minutes.)

When the measurement is over 24 hours,

the stopwatch will be reset to “0:00oo”

and start counting again.

2 Reset the digits to “0:00oo” before using

the stopwatch. When the split and the

stopwatch indicators are flashing, depress

button “B” to check that the stop indicator

starts flashing, and then depress button

“C” twice to reset the digits to zero.

3 When measuring a long period of time,

return the stopwatch to the time display

after the stopwatch starts to prevent any

possible mistaken operation.

* When button “B” or “C” is depressed in the

stopwatch display, a single “beep” sounds

to confirm the operation.

■ HOW TO USE THE STOPWATCH

Button

B while keeping button C depressed:

Engagement and disengagement

of the alarm in the time display

Button

A while keeping button C depressed:

Turning on and off of the hourly

time signal in the time display

Buttons

B & C:

Alarm test in the time display while

keeping the buttons depressed.

Button A : • Selection of the display.

The selection is made in the following order:

Time display

Stopwatch display

Alarm setting

▲

▼

Time/calendar setting

Seconds

Stopwatch

indicator

Hour

Minutes

1/100 second

indicator

Split indicator Stop indicator

1/100 second

INSTRUCTION MANUAL

CAL. Y704 (R23 SERIES)

NREY704A

10-98

STOPWATCH

AM/PM

mark

Day Alarm mark

■

DISPLAY AND BUTTON OPERATION

▼

C: Split/Split

release/

Reset

B: Start/

Stop

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lorus Y704A Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info