Bedienungsanleitung Lorus Z008 (Seite 2 von 2) (Englisch)

593908

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

■ HOW TO USE TIMER

1. From normal time mode, press S3 button 4

times into SECOND TIME ZONE.

2. In SECOND TIME ZONE, press S2 button to

begin setting Procedure. Hour digits begin

flashing.

3. To adjust hour digits, press S1 button (+1 hour).

4. Press S3 button once to set the minute digits.

5. To adjust minute digits, press S1 button (+30

minutes or -30 minutes).

6. When setting is completed, press S2 button.

7. Press S3 button to return NORMAL TIME MODE.

MINUTE SETTING BY PRESSING S1

(+30 MINUTES)

HOUR SETTING BY

PRESSING S1 (+1 HOUR)

SECOND TIME ZONE

NORMAL TIME

PRESS S3

4 TIMES

TO SET THE COUNTDOWN TIMER

1. While in the TIMER MODE, press S2 button. The

hours digit starts to flash on the display because

it is selected.

2. Press S3 button to change the selection of setting.

3. Press S1 button to increase the selected number.

Holding down S1 button changes the selection

at high speed.

4. After you set the countdown time, press S2 button

to return to the TIMER MODE.

indicated hourly chime is on

NORMAL TIME

PRESS S3

2 TIMES

ALARM MODE

HOUR SETTING BY

PRESSING S1

MINUTE SETTNG BY

PRESSING S1

TIME ZONE SETTING

BY PRESSING S1

indicated alarm is on

NORMAL TIME

TIMER

PRESS S3

3 TIMES

HOUR SETTING BY

PRESSING S1

MINUTE SETTING BY

PRESSING S1

TO USE THE COUNTDOWN TIMER

1. Press S1 button while in the TIMER MODE to start

the countdown timer.

2. Press S1 button again to stop the countdown timer.

3. While in the COUNTDOWN TIMER MODE, press S2

button to reset the countdown time to its starting

value and to start to countdown automatically

or while in countdown time mode press S2 button

and then press S1 button to reset the countdown

time.

4. Within the setting time 3 minutes, there is an alarm

(BI-BI) when the seconds digit is “0” or “30”.

5. Within the setting 10 seconds, there is an alarm

(BI) per second.

6. when timer has expired, the alarm (BI-BI-BI) lasting

10 seconds may be silenced by press S1, S2 or S3

button.

SECOND SETTING BY

PRESSING S1

SETTING IS COMPLETED

BI-BI-BI

TIMER HAS EXPIRED

BEGIN COUNT DOWN

RELOAD

TIMER AND

SET

6. When setting is completed, press S2 button.

7. Alarm on is available in one time zone only

(T1 or T2).

■ HOW TO SET SECOND ZONE TIME

■ ALARM & CHIME ON/OFF

PRESS S3

2 TIMES

NORMAL TIME

ALARM

In the alarm time mode, press S1 button to select

ALARM or HOURLY CHIME signals.

■ HOW TO USE EL BACKLIGHT

In any mode press s4 button to illuminate the

display for about 3 seconds.

Note:

1. The backlight of the watch employs an electro-

luminescent (EL) light, which tends to lose

illuminating power after very long use.

2. The illumination provided by backlight may be

hard to see when viewed under direct sunlight.

The miniature battery SEIKO SR626SW, Maxell

SR626SW or SONY SR626SW which powers your

watch should last approximately 3 years.

However, because it is inserted at the factory,

the actual life of the battery once in your

possession may be less than 3 years.

Be sure to replace the battery to prevent any

possible malfunction as soon as it runs down. To

replace the battery we recommend taking the

watch to a local watch repair shop.

Note: If the alarm is used for more than 20

seconds a day, the hourly time signal

more than 24 times a day, the stopwatch

more than once a day and/or the

illuminating light for more than 1 second

a day, the battery life may be less than

the specified period.

■ BATTERY CHANGE

■ CARE OF YOUR LORUS WATCH

• BATTERY

CAUTION

Do not expose the old battery to fire

or recharge it. Keep it at a place

beyond the reach of children. If a

child swallows it, consult a doctor

immediately.

• WATER RESISTANT

Condition

of use

Accidental

contact

with water,

such as

splashes

and rain

Swimming

and taking

a shower

Skin

diving

Scuba

diving

Indication

on the dial/

case back

Indication

* If your watch is 200 M/20 BAR, 100 M/10 BAR

or 50 M/5 BAR water resistant, it is so

indicated on the dial/case back.

• Do not operate the buttons when the watch is wet.

• If the watch is exposed to salt water, rinse it in

fresh water and then wipe it thoroughly dry.

NO NO NO

YES

YES NO NO

YES YES NO

YES

WATER

RESISTANT

WATER

RESISTANT

(50M/5 BAR

)

WATER

RESISTANT

100M/10 BAR

or above

(

Caution:

Leather straps are not water resistant except so

indicated, even if the watch head is water resistant.

• ALLERGIC REACTION

Because the case and band touch the skin directly,

it is important to clean them regularly. If not, shirt

sleeves may be stained and those with delicate skin

may develop a rash. Please wear the watch with

some play to avoid any possible allergic reaction. If

you develop a rash on your wrist, stop wearing and

consult a physician.

• MAGNETISM

Your watch will not be affected by magnetism

generated by household electric appliances.

• SHOCKS AND VIBRATIONS

Your watch may be worn for normal sports

activities, but be careful not to drop it or hit it on

hard surfaces.

• TEMPERATURE

Your watch is preadjusted so that constant accuracy

may be insured at normal temperature.

■ SERVICE

When your LORUS watch requires repair or

sevicing, please see the enclosed WARRANTY/

GUARANTEE.

Printed in China

Lorus Z008 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info