593910

Lorus Z010 Anleitung

1
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
■
CHARACTERISTICS
1. Time/calendar display: Hour, minute, second,
month, date and day of the week
2. Time indication: 12-hour display format with
PM indicator and 24-hour display format are
available.
3. Stopwatch: The stopwatch can measure
up to 23 hours 59 minutes and 59 seconds
in 1/100-second increments. Lap time
measurement is available. Up to 15 lap times
can be stored in memory.
Memory recall function: Data obtained in
the Stopwatch mode can be recalled after
measurement.
4. Countdown timer: The countdown timer
can be set up to 23 hours 59 minutes and 59
seconds.
5. Daily alarm: The daily alarm can be set to
sound at the designated time on a 24-hour
basis. Three individual daily alarms can be set.
Single-time alarm: The Single-time alarm
sounds only once at a designated time and it
is disengaged automatically.
　
Five individual
single-time alarms can be set.
6. Second Time Zone: Time in a different time
zone can be displayed.
7. Chime: The chime can be set to sound every
hour on the hour with a single beep.
8. Illuminating light: The built-in electro-
luminescent (EL) light evenly illuminates the
display for easy viewing in darkness.
■
BUTTONS AND DISPLAYS
■
HOW TO SET THE TIME/CALENDAR
■
HOW TO USE STOPWATCH
The display mode changes in the following
order by pressing Button D.
1 Press Button A for 2 seconds to change the
display to the
TIME/CALENDAR SETTING mode.
(The second digits start flashing.)
2 Selection of the digits to be adjusted (flashing)
is made in the following order by pressing
Button D.
3 One digit (flashing) is increased or decreased
with each pressing of Button B or C,
respectively. To move the digits quickly, keep
the Button pressed.
• Second setting
Press Button B or C in accordance with a
time signal. The second digits are reset to
“00” and start counting immediately.
When the second digits count any number
from “30” to “59” and Button B or C is
pressed, one minute is added and the
seconds are immediately reset to “00.”
Choice of 12-Hour/24-Hour format
• The time display format in either 12-hour
indication or in 24-hour indication can be
selected alternately by pressing button B or
C. Under the 12-hour indication format, “PM”
mark appears in the afternoon, but no AM
mark appears in the morning. Under the 24-
hour indication format, no mark appears on
the display.
* Measurement and release of lap time can be
repeated by pressing Button C.
* When Button C is pressed, the display changes
to show the current lap time and total time from
START for 3 seconds, and then it automatically
returns to show the ongoing measurement.
* When the stopwatch is reset by pressing Button C,
the measured data is stored in memory.
Press Button D to go to the STOPWATCH mode.
The STOPWATCH mode indicator appears on the
display.
STOPWATCH OPERATION
Standard Measurement
Lap Time Measurement
B
CC
BC
Start
Lap 1
Reset
Lap 2
Stop
B
B
C
Start
Stop
Reset
NREZ010
5-2015
CAL. Z010 (R23 SERIES)
During the measurement, the STOPWATCH signal
keeps flashing.
Press Button D to return to the TIME/CALENDAR
mode.
1. Press Button D to go to the Memory Recall
mode. The MEMORY RECALL moce indicator
appears on the display.
Memory Recall Function
2. Press Button C to show the data of the latest
measurement. The elapsed time and the
date of measurement are displayed with a
RUN number.
3. Press Button B to read each recorded lap time.
Recorded lap time is shown in order of each
lap number.
4. Press Button C to exit the Memory Recall
Function. The display returns to the MEMORY
RECALL mode.
How to delete all of the memories
• Press Button A for 2 seconds. The “DELETE”
indicator appears on the display when the
watch starts deleting stored data. When the
deletion is finished, the display returns to the
MEMORY RECALL mode, and after 1 second, it
automatically goes to the STOPWATCH mode.
Data obtained in the Stopwatch mode can be
recalled after measurement. Each time data from
START to RESET is managed as a RUN. Press Button
D to return to the TIME/CALENDAR mode.
■
ENGAGEMENT/DISENGAGEMENT OF
CHIME
With each press of Button C in the TIME/CALENDAR
mode, the chime can be alternately engaged
or disengaged. The CHIME signal appears or
disappears on the display accordingly.
A (SET/LIGHT)
PM indi-
cator
Hour
Day of the week
Chime
signal
Stopwatch
signal
Date
Minute
Second
Timer signal
Alarm
signal
B (START/STOP)
D (MODE)
C (LAP/RESET)
4 After all the adjustments are completed, press
Button A to return to the TIME/CALENDAR
mode.
TIMER
TIME/CALENDAR
STOPWATCH
MEMORY RECALL
LOCAL CITY
D
D
D
D
SECONDS
DATE
12/24-HOUR FORMAT
MONTH
MINUTES
HOURS
LOCAL CITY
D
D
D
D
D
D
D
DATE SETTING
MONTH SETTING
TIME/CALENDAR mode
12/24 FORMAT SETTING
LOCAL CITY SETTING
MINUTE SETTING
HOUR SETTING
SECOND SETTING
D
D
A
C
A
D
D
D
B
B
B
B
B
B
B
D
STOPWATCH mode indicator
STOPWATCH signal
D
B
C
Local city
Month Year
DAILY ALARM
D
SINGLE-TIME ALARM
D
YEAR
A
D
B
YEAR SETTING
D
MEMORY RECALL moce indicator
C
B
C
A
After
1 second
A
LAP number
Total time from START
■
HOW TO USE COUNTDOWN TIMER
Press Button D three times to go to the TIMER
mode. The TIMER mode indicator appears on the
display.
1. Press Button A for 2 seconds to change the
display to the TIMER SETTING mode. The hour
digits start flashing.
2. Press Button B or C
to set the second
digits. One digit (flashing) is increased or
decreased with each pressing of Button B or C,
respectively. To move the digits quickly, keep
the Button pressed.
3. Press Button D to confirm the second setting
and move on to the minute setting. The minute
digits start flashing.
4. Press Button B or C to set the minute digits.
One digit (flashing) is increased or decreased
with each pressing of Button B or C,
respectively. To move the digits quickly, keep
the Button pressed.
5. Press Button D to confirm the minute setting
and move on to the hour setting. The hour
digits start flashing.
6. Press Button D to set the Timer number.
7. Press Button A to complete the timer setting.
C
C
C
C
C
C
C
B
B
LAP time
D
B
D
C
D
C
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lorus Z010 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Lorus Z010

Lorus Z010 Bedienungsanleitung - Deutsch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info