Bedienungsanleitung Lorus Z022 (Seite 1 von 2) (Englisch)

593920

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

■

FEATURES AND SPECIFICATION

1. This watch is a combination quartz watch with

analogue and digital displays, 3 hands analogue

movement.

2. Accuracy at normal temperature: ± 30 seconds

a month

3. Time keeping mode: hours, minutes, seconds,

month, date, day of week, “PM”(only available

in 12-hour format)

Press S1 button to show the month and date

indication.

4. Alarm Mode: Daily alarm.

5. Timer Mode:

Measuring unit: 1 second

Input range: from 1 second to 23:59’59”.

6. Stop watch Mode:

Measuring unit: 1/100 of second

Measuring capacity: 23:59’59”.

7. Normal operating temperature range: between

-20°C and 70°C.

8. Battery type: CR2016, SR626SW

■

SETTING THE TIME (ANALOGUE)

(MODE)

AFTERNOON

HOUR HAND

DAY OF WEEK

C H I M E

SIGNAL

CHRONOGRAPH

SIGNAL

DATE

(SET/RESET)

MINUTES

SECONDS

CROWN

(LIGHT)

A L A R M

SIGNAL

(START/STOP)

CROWN

MINUTE HAND

SECOND HAND

DAY OF WEEK

CHIME SIGNAL

ALARM SIGNAL

SECONDS

T I M E R

SIGNAL

CHRONOGRAPH

SIGNAL

AFTERNOON

DIGITAL DISPLAY A

MINUTES

HOURS

(LIGHT)

(MODE)

(SET/RESET)

(START/STOP)

DATE

T I M E R

SIGNAL

HOURS

CROWN

1. Pull the crown out one step, the second hand

will stop.

2. Set the hands to the correct time by turning the

crown.

3. Push the crown back to the original position. The

watch will start running again.

The analogue indication and digital display of the

time setting can be adjusted separately.

■

HOW TO CHANGE DISPLAY MODE

■

HOW TO SET NORMAL TIME/

CALENDAR

1. While in the normal time mode, press S2 button

once. The second digits start to flash.

2. While the second digits are selected (flashing),

press S1 button to reset the seconds to 00. If you

press S1 button while the second count is in the

range between 30 and 59, the seconds are reset

to 00 and 1 is added to minutes. If the second

count is in the range between 00 and 29, the

seconds are reset to 00 but the minute count is

unchanged.

3. Press S3 button to move on to the next setting.

SECONDS

DATE

DAY

12 / 2 4 - H O U R

FORMAT

MONTH

MINUTESHOURS

Press S3 button to change the display mode. Each

time the button is pressed, the mode changes in

the following order.

TIMER

NORMAL TIME CHRONOGRAPH

ALARM

SECOND TIME ZONE

S3S3

NORMAL TIME

12/24 FORMAT SETTING

BY PRESSING S1

DAY OF WEEK SETTING

BY PRESSING S1

DATE SETTING BY

PRESSING S1

MONTH SETTING BY

PRESSING S1

MINUTE SETTING BY

PRESSING S1

HOUR SETTING BY

PRESSING S1

SECOND SETTING BY

PRESSING S1

■

HOW TO USE STOPWATCH

From the normal time mode, press S3 button once,

you are now in the chronograph mode.

First Usage:

1. Press S1 button alternately to start and stop the

chronograph.

2. Press S2 button to reset the chronograph to zero.

3. Press S3 button to return to normal time

mode. (This can be done at any time with the

chronograph still running.)

Second Usage:

1. Press S1 button to start counting.

2. Press S2 button to show the first split time T1 (0

to T1). The digits stop flashing, but chronograph

is still counting.

3. Press S2 button again to continue counting.

4. Further press S2 button to show the second split

time T2 (0 TO T2). This operation can be repeated

and the split times can be read: 0 to T3, 0 to T4

etc.

5. Press S1 button to stop the measurement of the

chronograph.

6. Press S2 button to show the last split time Tn (0

to Tn).

7. Press S2 button again, the chronograph is reset

to zero.

8. Press S3 button to return to the normal time mode.

NORMAL TIME

START

STOPWATCH

LAP

STOP

NREZ022

4-2014

CAL. Z022 (R23 SERIES)

4. Press S1 button to adjust the value. Holding S1

button down can fasten the process.

5. When the 12-hour format is selected, the indicator

“PM” indicates “p.m.” times. There is no indicator

for “a.m.” times.

6. Press S2 button to confirm the settings.

DIGITAL DISPLAY B

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lorus Z022 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lorus Z022

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info