Bedienungsanleitung Luvion Grand Elite (Seite 6 von 220) (Deutsch, Französisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Norwegisch)

532760

Zoom out

Zoom in

Vorherige Seite

1/220

Nächste Seite

1. Antenna Recieves the video and sound from the baby unit.

2. Antenna locking switch Slide the switch to the unlock position, to make the

antenna pop up and improve reception.

3. Record Press this button to start recording, press it again to stop recording.

4. Menu button Press this button to enter the main menu.

5. Navigation buttons The navigation buttons can be used when the system is in

normal use and/or when you are in the menu.

Normal use

• Press left (A) to automatically switch between multiple cameras. The screen

changes channel every 3 seconds

• Press right (M) to switch manually between multiple cameras

Use in the menu

Press the buttons to navigate in the menu. To conrm your selection press OK.

6. SCAN When SCAN is pressed, the screen is turned o. During this time the parent

unit will continuously scan the baby unit (or multiple baby units). When a sound

is detected, the parent unit will become active. Now you can see what happens

in the baby room. You can adjust the sound sensitivity for this detection with the

rotary knob at the side of the camera. After the parent unit has detected sound it

will take about 5 seconds to switch back to the scan mode. Except when the sound

is continously detected. In that case the monitor will be activated for another 5

seconds. There are 2 reasons to use the scan button: 1- to prevent you from being

disturbed by the bright LCD screen, or 2- to save energy. Press the scan button again

to deactivate the scan mode.

7. Coloured LEDs The green LED indicates that the monitor is switched on. The green/

red LEDs indicate the volume level of the camera (from low to high).

8. LCD screen Displays the video from the baby unit.

9. Microphone Recieves sound from the area around the parent unit and transmits it to

the baby unit. This will only happen when the Talk back button is pressed.

10. Alarm button This button enables you to increase or decrease the volume of the

alarm. The alarm is activated when the monitor is switched on by for example the

cries of the baby, because it is possible that the cries will not wake you. Note this is

not the volume button!

11. Night light Press this button on the parent unit to remotely turn on/o the night

light on the baby unit.

12. Charging indication LED The LED is red when the built-in batter is being charged

and green when it is fully charged.

13. DC 5V power adapter Connect the included DC 5V power adapter to power and/or

charge the parent unit.

Note: Use the right DC 5V socket for the power adapter. Do not use the AV- OUT socket.

14. AV/OUT Audio-video socket which allows you to connect a television or monitor to

the parent unit, using the RCA cable. When the RCA cable is connected the screen will

turn black.

Parent unit

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Luvion Grand Elite Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Luvion Grand Elite

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info