Bedienungsanleitung Luvion Icon de Luxe (Seite 21 von 25) (Englisch, Holländisch, Französisch)

775724

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

LUVION Premium Baby products

2. Use the , buttons to set the temperature above which the temperature alarm for a

room that is too hot will be activated when (red) is selected.

3. Use the , , buttons to set the temperature at which the temperature alarm for a

room that is too cold is activated if (green) is selected.

NOTE: the default setting for a too high temperature is 36˚C, the default setting for a too

low temperature is 8˚C. If the temperature exceeds these values, the temperature alarm icon

is displayed on the screen and the user is alerted with beeps. Press a button on the monitor

to stop the beeping and blinking.

4.3 Lullabies

The camera can play 8 diﬀ erent lullabies.

1. Press the menu / Ok button on the monitor to display the menu on the screen. (see

Fig. 2)

2. Use the , , , buttons to select the lullabies icon in the menu.

3. Press the menu / Ok button to open the lullabies submennu. Use the , , , but-

tons to select one of the three available lullabies, you can choose between 1 song play,

loop (play all 8 songs continuously) , or turn oﬀ lullabies

4. Press the menu / Ok button to con rm.

NOTE: The default setting is lullabies o .

4.4 Set the alarm

You can use the alarm to remind yourself that it is time for feeding, changing diapers,

sleeping etc.

1. Press the menu / Ok button on the monitor to display the menu on the screen. (see

Fig. 2)

2. Use the , , , buttons to select the alarm icon in the menu.

3. Press the menu / Ok button to open the alarm submenu. Use the , , , buttons

to set the timer for the alarm.

4. Press the menu / Ok button to con rm.

5. Press the button to exit the menu.

NOTE: The minimum time is 0.5 hours, the maximum time is 5 hours (7 levels)

NOTE: If an alarm is set, the alarm icon will be displayed on the screen.

NOTE: The default setting is alarm o .

NOTE: Press a button on the monitor to turn o the alarm if it goes o .

NOTE: If you do not stop the alarm by pressing a button on the monitor, it will go o for 1 minute

and then go o again for 1 minute after 3 minutes. In total, the alarm will sound 3 times before it

stops.

4.5 VOX Sensitivity

In this submenu you can set the sensitivity of the VOX function (sound activation). If no

sound is detected by the camera for 30 seconds, the monitor goes into sleep mode, the

screen and the sound will turn oﬀ . As soon as the camera detects sound that is louder

than the set sensitivity level, the monitor automatically switches on again, the image

and sound are switched on again. Follow the instructions below to change the VOX

level.

1. Press the menu / Ok button on the monitor to display the menu on the screen. (see

Fig. 2)

2. Use the , , , buttons to select the VOX icon in the menu.

3. Press the menu / Ok button to open the VOX submenu. Use the , buttons to

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Luvion Icon de Luxe Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info