586985
5
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
Page 3
1.4 In the Box
The following items are included in your Aurora carton:
¾ Aurora Rack-Mount Converter
¾ AC Power Cord
¾ Aurora QuickStart Guide
¾ Aurora User’s Manual
¾ Warranty registration card
If any items are missing or damaged, please contact your dealer or Lynx at http://www.lynxstudio.com.
1.5 Power and Safety Information
To prevent fire or shock hazard, do not expose this equipment to rain or moisture. Do not block any of
the ventilation openings. Do not defeat the safety purpose of the grounding-type plug. A grounding
type plug has two blades and a third grounding prong. The third prong is provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete
outlet. Protect the power cord from being walked on or pinched, particularly at the plugs, convenience
receptacles, and the point where they connect to the Aurora. Unplug this device during lightning
storms or when unused for long periods of time.
Please note that the Aurora comes factory-configured for a specific
voltage range, and cannot be changed in the field. The acceptable
voltage range of the Aurora is printed on the label affixed to the top
cover of the Aurora just above the AC power inlet. Failure to connect
the Aurora to an AC power source that conforms to the requirements
printed on the label may damage the Aurora and require it to be
returned to the factory for non-warranty repair.
1.6 Rack-Mounting
The Aurora is able be mounted in standard studio equipment racks. Please note that high performance,
high resolution AD and DA converters generate substantial heat.
For optimal performance and product longevity, it is necessary to leave
an empty rack space above and below the Aurora.
1.7 Operation Requirements
The Aurora was designed to operate seamlessly with industry-standard components. Control
requirements pertain to use of external remote control software - disregard if you will be controlling
the Aurora from its front panel controls only.
1.7.1 Input/Output
The Aurora supports AES/EBU for the digital inputs and outputs, and can be used with any AES/EBU
device that supports standard sample rates between 44.1kHz and 192 kHz in single-wire or dual-wire
mode. Please refer to Section 2.4 Cable Connections for more information about available cable sets.
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lynx Aurora 16 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info