587002
52
Zoom out
Zoom in
Vorherige Seite
1/55
Nächste Seite
52
If the Aurora is operating on an External or AES input SYNC SOURCE, you must manually
select the rate through either the audio application settings page, or globally through the OS’s
sound control settings. With external clocking you must also set the sample rate to the
desired rate on the clock master device. Otherwise, the playback streams may be sample rate
converted by the operating system, compromising playback quality. Please see Section 5.1,
Clock Settings and Connections for more information.
If the Aurora is operating on Internal, and there is a sample rate discrepancy, check the OS
default sample rate and see if that is where the discrepancy exists. In Windows, this can be
established in the Sound Section of Control Panel, after selecting a device click Properties >
Advanced > Default Format. In OSX, this would be established from Utilities > Audio MIDI
Setup. Select the device and then the sample rate in the right pane.
Also, check in the Lynx Mixer and make sure that Rate Lock from the Adapter page, or
Mixer Lock from the Settings > Advanced menu, is NOT selected.
With multiple Auroras connected via a Thunderbolt daisy-chain, the units show
different sample rates (OSX only):
This behavior has been observed most notably in OSX. If individual Auroras that are used
together in an aggregate suddenly show up with different SYNC SOURCES and SAMPLE
RATES then anticipated, it seems to be a glitch in Audio MIDI Setup. To correct this, close
your audio software, then open the Lynx Mixer and re-select the desired SYNC SOURCE for
each misbehaving unit. Then re-launch your audio application and verify that the SYNC
SOURCEs have remained stable.
If the SYNC SOURCE continues to be erroneous, try building a new aggregate device, and
then re-booting the computer.
52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lynx Aurora LT-TB wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info