Bedienungsanleitung M-Locks MiniTech (Seite 3 von 18) (Englisch)

743785

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Important instructions

• Before using the lock, please read the instructions for use carefully.

• The instructions for use only relate to the lock itself and not to how to operate the safe.

•Ensure that you only program the lock while the safe door is open.

•After changing the code, always try the code several times with the safe door open.

•Only after several positive function tests (opening / closing) the safe door may be closed.

•Each key entry is confirmed by an audible tone.

•You have a maximum of 10 seconds for each key entry. If you do not make an entry via the keypad

during this period of 10 seconds, the entry procedure will automatically abort. You must then start

again from the beginning.

•After entering a valid code, a double signal sounds. An invalid entry will trigger a long tone.

•After entering an invalid code the first attempt, wait 20 seconds before entering the code again.

•If the code is entered incorrectly on four consecutive occasions, the keypad and the lock will be

disabled for 5 minutes. During this period, the LED will flash every 10 seconds and you will hear a

long tone when attempting to make an entry. Entering an incorrect code on two further occasions

after the keypad has been re-enabled will trigger a new keypad lock-out period of 5 minutes. After

entering a valid code you have four new occasions to enter the code and open the lock.

•The lock works with a six digit code. Preceded by a two digit ID number.

•At the time of delivery, the lock is set to the standard Manager Code of 123456. Change this code

immediately to your own choice of Manager Code. Do not use personal or other simple data which

can easily be found out for your Manager Code

•If needed, the owner of the Manager Code can add up to 48 codes / users. This code must be

immediately changed by the user in a code of their own choice. Do not use personal or other simple

data for your user code.

•Users 50 - 59 always have an override code. This means that they can always open immediately

after entering the first code, even if time delay has been activated.

•Please keep the code always carefully and protect it against improper use by unauthorized persons.

•When typing in your code cover the keypad so no one near you can see your code.

•Depending on the used lock / keypad and the way the lock is installed, there are several ways to

open and to close a safe. By example with a lever or by turning the keypad. Please contact your safe

supplier for more information about your specific situation.

Caution! Don’t forget your code, otherwise the lock can not be used anymore!

•The lock has been designed for use in a temperature range from +10˚C to +50˚C and a non-

condensing humidity range from 30% to 80%.

•It may only be cleaned with a moist cloth (do not use aggressive cleaning agents).

•The lock may only be installed by qualified fitters.

•The lock may not be lubricated.

•Never open the lock housing. If it is necessary to disassemble the hardware, only do so in

accordance with the technical instructions. If you fail to do so, the lock may no longer function

properly and you will forfeit your right to warranty.

Page 2 of 20 IU_MiniTech_03

M-LOCKS BV - Vlijtstraat 40 - NL-7005 BN Doetinchem - T +31 (0)314 376 876

sales@m-locks.com - www.m-locks.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

M-Locks MiniTech Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von M-Locks MiniTech

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info