207
Fig. 7.9
INSIDE OF OVEN
This must be cleaned regularly.
Remove and refit the side runner frames
as described on the next chapter.
With the oven warm, wipe the inside
walls with a cloth soaked in very hot
soapy water or another suitable prod-
uct.
Side runner frames, tray, lower panel
and rack can be removed and washed
in the sink.
ASSEMBLY AND DISMANTLING OF
THE SIDE RUNNER FRAMES
– Fit the side runner frames into the
holes on the side walls inside the
oven (Fig. 7.8).
– Slide the tray and rack into the run-
ners (Fig. 7.9).
The rack must be fitted so that the
safety catch, which stops it sliding
out, faces the inside of the oven (fig.
7.9).
– To dismantle, operate in reverse
order.
Fig. 7.8
REPLACING THE OVEN LIGHT BULB
Switch the cooker off at the mains.
When the oven is cool unscrew and
replace the bulb with another one
resistant to high temperatures (300°C),
voltage 230 V (50 Hz), 15 W, E14.
Note: Oven bulb replacement is not
covered by your guarantee.
