Getting started...
GB
IE
05
MHTP245-2 by MacAllister Before you start
Fuel and engine oil
Place the product on a stable, level surface. We recommend >
laying a non-ammable sheet under the product.
Mix a regular-grade unleaded petrol and a quality engine oil for >
air cooled 2 stroke engines in a suitable container (Fig. 1).
Use an anti-oxidant added quality oil expressly labelled for air- >
cooled 2 stroke engine use (JASO FC GRADE OIL or ISO EGC
GRADE).
Do not use BIA or TWC (2 stroke water-cooling type) mixed oil. >
The recommended mixing ratio for petrol:oil is 40:1. >
Unscrew and remove the fuel tank cap (10). >
Fill correctly mixed fuel/oil into the tank using a fuel funnel tted >
with a lter to avoid debris entering the tank. Do not overll.
Leave a minimum 5 mm of space between the top of the fuel and
the inside edge of the tank (11) to allow for expansion (Fig. 2).
This product is equipped with a 2-stroke engine, the fuel and oil
tank are combined and it is essential to ll a fuel-oil mixture before
operating this product. Observe the technical specications for
suitable fuel and engine oil.
WARNING! Fuel and oil are highly inammable! Fumes
will explode if lit! Ensure that there are no naked ames
around the product! Do not smoke while lling fuel and
oil!
NOTE: Never mix fuel and oil directly in the tank of the
product.
WARNING! This product is not supplied with fuel-oil
mixture in the engine! Before operating this product it is
essential to ll it with fuel!
