Bedienungsanleitung Maginon BTR-1 (Seite 2 von 2) (Englisch)

532296

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

1. Packaging content

Please unpack the Bluetooth® Receiver carefully and check whether all the

parts listed below are included:

1. MAGINON Bluetooth® Receiver BTR-I

2. Mains adapter (DC 5V)

 3. Connectingcablewith2x3.5mmjackplug

4. Connecting cable with 3.5 mm jack plug and stereo cinch

5. Operating instructions

6. Warranty and service documents

2. Hazard, safety and warning notices

Improper handling of your Bluetooth® Receiver and accessories may put

you and others at risk and damage or destroy the device. So please read

and strictly observe the following Safety information. Please keep the

instructions for future reference and pass them on with the device.

Intended use

 Your Bluetooth® Receiver is intended for connecting Bluetooth®

devices to stereo systems. It has been designed for private use

and is not suitable for commercial purposes

Information on Bluetooth® devices

 Bluetooth® devices work with shortwave radio signals. These

can interfere with other electronic devices and medical devices.

 Switch your Receiver off in areas where its use is prohibited.

 Do not use your Receiver in medical facilities, on an aircraft, at filling

stations or near automatic fire detectors or automatically controlled

devices.

 Keep your Receiver at least 20 cm away from cardiac pacemakers and

other medical devices. Radio signals can interfere with the functioning

of cardiac pacemakers and other medical devices.

Electrical hazard

 If foreign objects or a liquid have got into your Bluetooth® Receiver,

switch it off. Let everything dry thoroughly. Otherwise there is a danger

of fire or electrocution

 Receiverandaccessoriesmaynotbeexposedtodrippingwaterorspray

 orexcessivehumidity.Dangeroffireandelectrocution.

 The Receiver may not be taken apart, modified or repaired by yourself.

Danger of fire and electrocution.

 Use only the mains adapter supplied.

Injuries and material damage

 Provide for sufficient ventilation and do not cover your Receiver

to avoid overheating.

 Do not place open fire sources, such as burning candles, on or near the

Receiver.

 Damagetotheelectronicsortothehousingcausedbyexternal

influences, such as electric shocks, falls or others are not covered by the

warranty and shall thus be charged for.

4. View of the Receiver 5. Use

5.1. Connecting your Receiver

To use your MAGINON Bluetooth® Receiver BTR-I, connect it as shown

below.

First connect your Receiver (1) via one of the connecting cables supplied

(2) to your stereo system or another suitable audio output device. Then

connect the mains adapter (3) to your Receiver (1) and a mains socket (4).

The control LED of the Receiver will then blink slowly in blue after about

6-8 seconds.

1. Control LED

2. Mains adapter connection (DC 5 V)

3. Audio output 3.5 mm jack plug

3. Parts description

1. BTR-1 Bluetooth® Receiver

2. Mains adapter

3. 3.5 mm jack plug cable

4. Cinch cable

5. Operating instructions (not

shown)

6. Warranty documents (not

shown)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Maginon BTR-1 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Maginon BTR-1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info