581651
10
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
10
SYSTEM INSTALLATION
Connecting a television (fig. 2):
The soundbar WSB 25 is designed to be connected directly to a TV. It can be connected in three different ways:
a) Connecting the TV to the HDMI input HDMI1/ARC (4):
Connect your TV to this input if it has an HDMI socket with ARC functionality (Audio Return Channel, HDMI 1.4 standard). This
function may need to be activated in the TV‘s settings. Dolby Digital-encoded signals can also be reproduced via the built-in
Dolby decoder. The necessary connecting cable is not included in delivery.
b) Connecting the TV to the DIGITAL INPUT (2):
Use the supplied optical cable (G) and connect the digital audio output of your TV to the audio input DIGITAL INPUT (2) of the
soundbar. Dolby Digital-encoded signals can also be reproduced via the built-in Dolby decoder.
c) Connecting the TV to audio input ANALOG INPUT (3):
Use the supplied audio cable (F) and connect the audio output on your TV to audio input ANALOG INPUT (3). If your TV has an
audio output with fixed level, this is preferable to the audio output with variable level.
If your TV is equipped with a 3.5 mm audio output jack (e.g. headphone socket), you can use the supplied adapter (E).
Connecting additional devices to the soundbar WSB 25 (fig. 3)
Connecting an analogue or digital audio source to the soundbar:
Additional audio sources such as CD players, MP3 players and satellite receivers can also be connected to the ANALOG INPUT
(3) and to the DIGITAL INPUT (2) on the soundbar. When doing this proceed as described in the previous section.
Connecting an audio/video source to the HDMI input HDMI 2 (5):
An audio/video device (e.g. DVD/Blu-ray player or games console) can be connected to this input. The audio signal is
reproduced by the soundbar. Dolby Digital-encoded signals can also be reproduced via the built-in Dolby decoder. The video
signal is output to the TV via the HDMI 1 port. To do this, connect the HDMI 1 socket (4) to an HDMI input on the TV.
Connecting an optional subwoofer to the subwoofer output SUB OUT (6):
Use a RCA cable to connect the subwoofer output of the WSB 25 to the LEF input of the subwoofer. For 2-line subwoofer
inputs, it’s best to use a Y-RCA cable. Also observe the operating instructions for the subwoofer.
Connecting the power supply of the soundbar:
Included in delivery is a universal, external mains adapter (B) (110 - 240 V / AC 50/60 Hz). The mains cable used in your country,
however, may be different. If the mains cable is not compatible with your power sockets or if you are in any doubt, please contact
your Magnat dealer.
1. Connect the output cable (jack connector) of the external mains adapter to the power supply jack of the Soundbar (1).
2. Insert the mains cable into the jack on the mains adapter.
3. Insert the mains cable into the socket. Make sure that you are using the mains plug that is compatible with the socket (refer
to the information above).
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Magnat WSB 25 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info