494209
33
Zoom out
Zoom in
Vorherige Seite
1/37
Nächste Seite
English
33
Symptom Remedy
Power is ON but no screen
image.
Check whether the connection of the antenna, cable receiver or satellite box is connected correctly.
Check whether all the cables to the unit are connected to the correct Output jack of your device like Blu-ray disc / DVD recorder.
Make sure that the selected Input mode is connected to the working Input jack.
Check if your computer is NOT in sleep mode when the Input mode of this unit is in PC mode. Tap any key on the keyboard to
wake up your computer.
No picture or sound Check if the Power is on.
Check whether all the cables to the unit are connected to the correct Output jack of your device like Blu-ray / DVD recorder.
View other TV channels. The problem might be limited to the broadcasting station or weak signal strength.
Unplug the AC power cord and wait for about 1 minute, then plug the AC power cord and Turn On the unit again.
Check whether the connection of the antenna, cable receiver or satellite box is connected correctly.
Make sure that the selected Input mode is connected to the working Input jack.
Check if your computer is NOT in sleep mode when the Input mode of this unit is in PC mode. Tap any key on the keyboard to
wake up your computer.
Make sure that the sound is not muted. Press
so that the volume bar and current volume level will appear on the TV screen.
Make sure that the volume is NOT set to 0 or
. If so, use VOL+/ to adjust to the desired volume.
No color View other TV channels. The problem might be limited to the broadcasting station or weak signal strength.
Adjust Color in Picture settings.
p.18
No sound, distorted sound or
incorrect Audio Sound is heard
when using the HDMI-DVI
connections.
Make sure that the Analog Audio signals from the HDMI-DVI device are connected to the Analog Audio (L/R) Input jacks.
When using Component Analog Video, Composite Analog Video or PC VGA Video make sure that the Analog Audio (L/R)
connectors are mounted into the Audio (L/R) Input jacks.
Adjusted Picture or Sound
settings are not effective every
time the unit is Turned On.
You must set Home in Location.
p.26
Otherwise, the settings you adjusted will not be memorized after the unit goes into Standby mode.
Sound OK, picture poor Electrical interference from nearby appliances may affect picture quality.
Adjust Contrast and Brightness in Picture settings.
p.18
View other TV channels. The problem might be limited to the broadcasting station or weak signal strength.
For the best picture quality, watch High Denition wide screen programs.
If the HD content is not available, watch Standard Denition programs instead.
Picture OK, sound poor View other TV channels. The problem might be limited to the broadcasting station or weak signal strength.
Check if the audio cable is connected into the unit correctly.
You see a distorted picture or
hear an unusual sound.
You may be getting interference from electrical appliances, automobiles, motorcycles or uorescent lights.
Try moving the unit to another location to see if this is the cause of the problem.
Ghosts, lines or streaks in picture Electrical interference from nearby appliances may affect picture quality.
View other TV channels. The problem might be limited to the broadcasting station or weak signal strength.
You see noise or trash on the
screen.
When the capabilities of the unit exceed the capabilities of the Digital broadcasting, the signal will be increased to match the
capabilities of the display of the unit. This may cause noise or trash.
Different color marks on the TV
screen
View other TV channels. The problem might be limited to the broadcasting station, missing data or pixelation.
You switch to a different Input
and the volume changes.
This unit will memorize the volume level from the last time you adjusted it.
If the volume of the sound from another device is higher or lower, then the loudness will change.
Make sure Autovolumeleveling is set to On.
p.19
You switch to a different Input
and the screen size changes.
This unit will memorize the viewing mode from the last time you used the particular Input modes.
The display image does not
cover the entire screen.
If you are using the unit as a PC monitor, make sure that Horizontalposition and Verticalposition in PCsettings are set correctly.
If you are watching TV or using the Composite Video, Component Video or HDMI with 480i Input, press FORMAT repeatedly to
switch various screen modes.
Captions are displayed as a white
box. No caption is displayed in
the Closed Caption-supported
program.
Interference from buildings or weather conditions may cause captioning to be incomplete if watching Analog TV signals.
Broadcasting station may shorten the program to insert advertisements.
The Closed Caption decoder cannot read the information of the shortened program.
Black box is displayed on the TV
screen.
The text mode is Selected. For caption, select CC-1, CC-2, CC-3, CC-4 or Off.
Note
The LCD screen is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a xed point of blue, green or red.
This is not to be considered a defect in the LCD screen.
Some functions are not available in specic modes, but this is not a malfunction. Read the description in this Owner’s Manual for more details on correct operations.
33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Magnavox 19ME402V wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info