Bedienungsanleitung Magnavox 46MF401B (Seite 34 von 37) (Englisch)

494170

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

FAQ

Question Answer

My remote control does not

work.

What should I do?

• Check the antenna or cable connection to the main unit.

• Check the batteries of the remote control.

• Check if there is an obstacle between the infrared sensor window and the remote

control.

• Test the signal output. If OK, then possible infrared sensor trouble.

[IR Signal Check]

➠

p. 35

• Aim the remote control directly at the infrared sensor window on the front of the unit.

• Reduce the distance to the unit.

• Re-insert the batteries with their polarities (+/– signs) as indicated.

• When there is an infrared-equipped device such as PC near this unit, it may interrupt

the remote control signal of this unit.

• Move the infrared-equipped device away from this unit, change the angle of the infrared

sensor or turn off the infrared communication function.

How come the Initial setup

appears every time I turn on

this unit?

• Connect the RF coaxial cable to the unit directly and run the initial setup.

• Make sure to complete the channel scan before the unit goes to the standby mode.

Why I cannot watch some RF

signal TV programs.

• Make sure [Autoprogram] has been completed.

➠

p. 19

• Autoprogram must be completed when you set up the unit for the ﬁ rst time or move it

to a location where previously unavailable channels are broadcast.

• The selected channel may not be broadcasting.

• When [Autoprogram] is interrupted and not completed, some channels will not be

received. Make sure to complete.

➠

p. 19

• The selected channel cannot be viewed by the [Child Lock] setting.

➠

p. 27

• The unit requires some kind of antenna input. An indoor antenna

(VHF /UHF), an external antenna (VHF /UHF) or an RF coaxial cable from your wall

cable/satellite box needs to be plugged into the unit.

How come there is no image

from the connected external

devices?

• Check if the right input mode is selected by pressing SOURCE or using CH + / − .

[Switching Each Input Mode]

➠

p. 16

• Check the antenna or cable connection to the unit.

• When using the Component Video Connection check that the Green (Y), Blue (Pb/Cb)

and Red (Pr/Cr) connectors are connected to their corresponding colored jacks on the

unit.

Whenever I entered channel

number,

it changes automatically.

• Many digital channels have alternate channel numbers.

The unit changes the numbers automatically to the ones signifying the broadcasting

station channel number.

These basic numbers used for previous analog broadcasts.

(e.g., input ch#30 auto change to ch#6.1)

Why are captions not displayed

entirely?

Or, captions are delayed behind

the dialogue.

• Captions that are delayed a few seconds behind the actual dialogue are common for live

broadcasts. Most captioning production companies can display a dialogue to maximum

of 220 words per minute. If a dialogue exceeds that rate, selective editing is used to

insure that the captions remain up-to date with the current TV screen dialogue.

How can I set the clock ?

• There is no clock function on this unit.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Magnavox 46MF401B Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info