Zoom out
Zoom in
Vorherige Seite
1/6
Nächste Seite
 E-Control
User- and installation manual
Dated March 1
st
2004
Important:
Switch off power before connecting or disconnecting wiring to thermostat.
A qualified electrician to current IEE regulations must install all wiring, failure to do so may invalidate
the warranty.
Introduction:
The ME-control thermostat is very user friendly and has intelligent software to guide the user
throughout the whole menu-structure. The thermostat is capable of switching your underfloor heating
system on and off, up to four different times of the day. The ME-control has an automatic Setback
period. The setback periods are the events between your comfort periods. This will lower your room
temperature as well as your energy costs without reducing the comfort.
In order to program just follow the onscreen information, you will be guided through the different
menus and functions automatically.
Nevertheless it is strongly recommended to study the operators manual carefully and keep it for future
reference.
The ME-Control has a 3-button structure:
Middle button : Selection button, higher/lower and Scroll through options.
Right button : to confirm choices/settings and to proceed.
Left button : to rectify wrong choices and settings.
* Some menu parts contain more program choices than displayed at first sight. Use middle
button to scroll down until “Back to main Screen” is displayed, this is always the last choice in
all menus.
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Forum

Suche zurücksetzen

  • Hallo,ich brauche ihre Hilfe. ich habe für meine Badfußbodenheizung ein Magnum E-Control Thermostat eingebaut bekommen. Da dies nun schon einige Zeit her ist und das Thermostat total verstellt ist,benötige ich die diesb. Beschreibung hierfür. Auf dieser Internetseite habe ich diese zwar gefunden,aber leider nur in EnglischKönnen sie mir helfen???? Danke für ihre Mühe.
    E-Mail: Richter.heinz62@gmail.com Eingereicht am 28-10-2020 15:26

    Antworten Frage melden

Inhalt der Seiten


  • Page 1

    E-Control
    User- and installation manual
    Dated March 1st 2004

    Important:
    Switch off power before connecting or disconnecting wiring to thermostat.
    A qualified electrician to current IEE regulations must install all wiring, failure to do so may invalidate
    the warranty.
    Introduction:
    The ME-control thermostat is very user friendly and has intelligent software to guide the user
    throughout the whole menu-structure. The thermostat is capable of switching your underfloor heating
    system on and off, up to four different times of the day. The ME-control has an automatic Setback
    period. The setback periods are the events between your comfort periods. This will lower your room
    temperature as well as your energy costs without reducing the comfort.
    In order to program just follow the onscreen information, you will be guided through the different
    menus and functions automatically.
    Nevertheless it is strongly recommended to study the operators manual carefully and keep it for future
    reference.
    The ME-Control has a 3-button structure:
    Middle button : Selection button, higher/lower and Scroll through options.
    Right button : to confirm choices/settings and to proceed.
    Left button
    : to rectify wrong choices and settings.

    * Some menu parts contain more program choices than displayed at first sight. Use middle
    button to scroll down until “Back to main Screen” is displayed, this is always the last choice in
    all menus.



  • Page 2

    Start up menu:
    When switching the thermostat on for the first time, you will be asked a series of questions about your
    heating system.
    1. Language
    - you have a choice between English, German & French
    2. Date
    - set to present date
    3. Time
    - choose between 12 & 24 hr clock, then set to present time
    4. Heating system
    - choose “with floor sensor”
    5. Floor thickness
    - Enermat (floor adhesive & tiles) or Enercable (<5cm, <10cm or >10cm)
    6. Standard settings
    - Factory preset settings, can be changed in later menus.
    7. Comfort temperature - Factory setting 21.5°C, change now or later in menu.
    8. Select timer menu - only for new floors. Please allow for drying out period.
    9. Timer
    - set for when floor is completely cured.

    The menu-structure is provided with 3 main programs:
    Start-up menu : to program factory or change settings.
    Mode
    : to change settings temporarily
    Menu
    : to change settings permanent

    The auto standard comfort period factory settings:
    Monday till Friday
    : comfort heating during 06.00 till 09.00 and 15.00 till 22.00 hrs.
    Saturday and Sunday : comfort heating during 09.00 till 23.00 hrs.
    Besides the above-mentioned periods the thermostat works on stand-by and is auto-programmed for
    lower setback temperatures to save energy consumption.

    Explanation of the LED colors and signals :
    Yellow
    : Heating system is operational. No energy consumption.
    Red
    : Active energy consumption. System in heating mode.
    Green
    : Heating system in setback period.
    Red flashing fast
    : Sensor failure.
    Heating system non-operational (Please contact Technical Support).
    Red flashing slowly : Heating system in sleeper function
    will be activated by timer at mentioned date/time.
    Explanation main screen textures:
    Comfort period
    : heating system operational
    Setback
    : setback period activated
    Heating
    : power on
    Timer activates on
    : date and time of activation of the heating system
    Thermostat off
    : heating system not operational
    Manual control
    : auto-standard settings off - manual temperature adjustment +/Sensor failure
    : heating system non-operational



  • Page 3

    At the same time, the appearance of main-screen is the confirmation that all standard settings or preprogrammed settings are fully operational.
    Use the auto-program as confirmed in Start menu approx. 14 days after date of activation. In this way
    the memory of the thermostat is able to store and adapt historical temperature movements.

    Important:
    Changing standard settings is only possible from main screen, by using Mode (left button) and Menu
    (right button)
    Press the Mode button for temporary changes and the Menu button for permanent changes in
    standard settings.
    Always return to main screen after new settings are programmed.
    Press Mode for temporary changes and next options appear in display:
    Options

    Explanation

    1. Temporary temperature

    : Used only when thermostat is in setback mode and extra heating
    is required.

    2. Thermostat Auto

    : Thermostat will follow factory settings or 7 days program.

    3. Manual Control

    : The thermostat will heat continuously 24/7 according to the comfort
    temperature.

    4. Thermostat OFF

    : Thermostat is turned off and will not follow any program, however all
    presets remain in memory.

    5. Timer

    : Timer menu is used when there will be no heat requirement for a
    long period of time, for example during holidays.
    This is also used when new floors are installed, to allow a drying out
    time and avoid possible construction damage because of early
    heating.

    6. Back to main screen

    : Return to main screen.

    Scroll to option and press confirm to activate one of the above.



  • Page 4

    Press Menu button for permanent changes and next options appear in display:
    Options

    Explanation

    1. Program/Comfort temperature: Change Comfort temperature.
    Change the 7 days program to your preferred times. (To activate
    7 Days program – return to main screen, press Mode and scroll to
    Thermostat Auto and confirm).

    Return to Factory Settings.

    2. Date/time

    : Date & time can be accessed and changed

    3. Other functions

    : *See explanation other functions

    4. Child lock on/off

    : To prevent unintentional changing of settings. The easy ON/OFF
    indicator will tell you whether the child lock is on or off.

    5. Back to main screen

    : Return to main screen

    *3. Options for "Other functions":
    1. Energy consumption

    : Consumption of energy in % during displayed period. (Please
    refer to calculation on last page).

    2. Language

    : Only change if necessary

    3. Celsius / Fahrenheit

    : Select preference

    4. Reset All

    : Allows you to reset the thermostat to factory settings and return
    to start menu.

    5. Advanced functions

    : See explanations advanced functions.

    6. Back to main-screen

    : Return to main screen.

    3.5 Options in "Advanced functions" menu :
    Attention !!!
    Changes in advanced functions menu may cause negative influence concerning the energy
    consumption and comfort feelings and even disturb the heating system completely.
    Only use this menu in consultation with and support from the supplier or official installer involved.
    Options

    Select and Confirm

    1. Heating system

    : Only to use in case of wrong setting in start menu or for an other
    ( new ) application.

    2. Sensor temperature

    : Shows the actual sensor temperature.

    3. Calibration

    : +/- adjustment of sensor- and measured temperature.

    4. Adaptive function on/off

    : Off= de-activation all self programming adjustments.

    5. Differential

    : +/- adjustment reaction time / graduation schedule.

    6. Contrast

    : Adjust contrast of display with right and left button.

    7. Back to main-screen

    : Return to main screen.



  • Page 5

    Disturbances, failure signals and/or wrong readout of information:
    1. Return to Start menu:
    in main-screen press the Menu button, select other functions and confirm, select Reset All and
    confirm again.
    Select language …..the first question of the Start menu will appear in the display and proceed.
    2. Switch the current off/on and try again.
    3. Switch off the power, remove the thermostat and check if all wiring is connected correctly.
    4. If none of the above mentioned correct the problem contact your supplier or installer.

    Installation instructions for mounting the ME-Control:

    Press the housing of the display slightly together at the sides and use a pencil or something similar,
    not sharp object, and press it carefully into the square hole on the upside of the thermostat. Both,
    housing and base-plate, can now be removed
    Ensure that the power supply is switched off. Connect the wires to the thermostat as per the
    instructions.

    Locate the ME-Control thermostat into the back box (deep single switch back box) and secure in place
    with two screws.
    Replace the base-plate and display housing and push into place.



  • Page 6

    Technical Details:
    Supply voltage
    Output relay
    Temperature range
    Housing

    : 230V - 50/60 Hz
    : Max. 16 Amps. / 230V
    : +5/+40ºC (Option ºF)
    : IP20

    Built in back box (deep 50mm single switch back box) according to Standard DIN sizes
    Delivered incl. built-in sensor and external (floor) sensor
    Colour

    : Polar white (RAL 9010)

    Guarantee

    : 2 years manufacturers guarantee

    Approvals

    : VDE / FI / CE / CCA

    Manufacturer

    : C&F Technics, The Netherlands

    More information:
    ENERfoil magnum LTD
    P.O. Box 2004
    Aberfeldy
    Perthshire
    PH15 2YF
    Technical Support:
    Fax:
    Email:

    01887 830638 (Mon-Fri, 9 am –5 pm).
    01887 830640
    technical@enerfoil.com

    Energy consumption formula:
    The read out of energy consumption is as follows;
    30 days x 24 hours x %Last 365 days x Installed power = energy consumption in kWh
    100
    365 days x 24 hours x %Last 365 days x Installed power = energy consumption in kWh
    100
    Example:
    30 days x 24 hours x 20 (% Last 365 days) x 1.7 (kW installed power) = 244 kWh
    100
    If the energy consumption screen displays N/A, this means there is no available percentage at present
    time. Thermostat hasn’t reached the period of measuring yet.






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Magnum E control wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Magnum E control in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 0,47 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Magnum E control

Magnum E control Bedienungsanleitung - Holländisch - 4 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info