Bedienungsanleitung Makita 1806B (Seite 5 von 14) (Englisch, Holländisch)

448166

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

ENGLISH

Explanation of general view

1 Hex wrench

2 Bolt

3 Adjusting screw

4 Planer blade

5 Notch in the blade

6 Drum cover

7 Drum

8 Triangular rule

9 Screwdriver

0 Knob

q Switch trigger

w Lock button

e Lock-off button

r Start

t End

y Sharpening holder

u Wing nut

i Blade (A)

o Blade (B)

p Side (C)

a Side (D)

s Nozzle

d Makita vacuum cleaner

f Limit mark

g Chip cover

h Brush holder cap

SPECIFIC ATIONS

Model 1806B

Planing width ............................................... 170 mm

Planing depth ................................................... 2 mm

No load speed (min

–1

) ................................... 15,000

Overall length ............................................... 529 mm

Net weight ....................................................... 8.8 kg

•

Due to the continuing program of research and

development, the specifications herein are subject

to change without prior notice.

•

Note: Specifications may differ from country to

country.

Power supply

The tool should be connected only to a power

supply of the same voltage as indicated on the

nameplate, and can only be operated on single-phase

AC supply. They are double-insulated in accordance

with European Standard and can, therefore, also be

used from sockets without earth wire.

For public low-voltage distribution systems of

between 220 V and 250 V

Switching operations of electric apparatus cause volt-

age fluctuations. The operation of this device under

unfavorable mains conditions can have adverse

effects to the operation of other equipment. With a

mains impedance equal or less than 0.42 Ohms it can

be presumed that there will be no negative effects.

The mains socket used for this device must be

protected with a fuse or protective circuit breaker

having slow tripping characteristics.

Safety hints

For your own safety, please refer to enclosed safety

instructions.

ADDITIONAL SAFETY RULES

1. Rags, cloth, cord, string and the like should

never be left around the work area.

2. Avoid cutting nails. Inspect for and remove all

nails from the workpiece before operation.

3. Handle the blades very carefully.

4. Be sure the blade installation bolts are

securely tightened before operation.

5. Hold the tool firmly with both hands.

6. Keep hands away from rotating parts.

7. Before using the tool on an actual work-

piece, let it run for a while. Watch for vibration

or wobbling that could indicate poor installa-

tion or a poorly balanced blade.

8. Make sure the blade is not contacting the

workpiece before the switch is turned on.

9. Wait until the blade attains full speed before

cutting.

10. Keep at least 200 mm away from the tool

at all times.

11. Always switch off and wait for the blades to

come to a complete stop before any adjusting.

12. Never stick your finger into the chip chute.

Chute may jam when cutting damp wood.

Clean out chips with a stick.

13. Do not leave the tool running. Operate the

tool only when hand-held.

14. When leaving the planer, switch off and set it

with the front base up on a wooden block, so

that the blades do not contact anything.

15. Always change both blades or covers on the

drum, otherwise the resulting imbalance will

cause vibration and shorten tool life.

16. Wait for complete run-down before putting the

tool aside.

17. Use only Makita blades specified in this

manual.

SAVE THESE INSTRUCTIONS.

1806B (E) (’100. 9. 28)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita 1806B Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita 1806B

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info