Bedienungsanleitung Makita 194523 (Seite 4 von 16) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

690934

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

ENGLISH

Explanation of general view

GENERAL SAFETY RULES

WARNING! Read and understand all instructions.

Failure to follow all instructions listed below, may

result in electric shock, fire and/or serious personal

injury.

SAVE THESE INSTRUCTIONS.

The tool shall not be used in any position where it is liable

to be within 15 m of the overhead electrical lines of 33,000

V or more (normally wires suspended from steel towers)

or 9 m in the case of overhead lines carrying less than

33,000 V (normally wires suspended by wooden poles),

unless the electricity supplier has been approached for

advice. (Fig. 1)

DANGER:

Serious injury or death from electrocution if power lines or

electrical wires are contacted.

WARNING:

For safe operation, read and understand owners manual.

Wear face shield (and/or safety glasses) and hard hat to

protect against falling debris. Always have a clear work

area, retreat path, and be aware of limb/branch location to

avoid falling limbs and debris. Keep bystanders 50 feet

(15 m) away when operating saw. Do not expose to rain.

Store Indoors. (Fig. 2 & 3)

WARNING:

To minimize the risk of eye injury, always use eye

protection.

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before installing the

pruning extension.

• Before using, check that the chain saw is securely

attached to the pruning extension by bolt.

• Always use eye and head protections.

• Always clear the work area before operation.

• Never cut in an unstable posture (e.g., cutting from a

ladder or tree).

• To avoid the risk of injury from falling branches, never

stand directly under the branch being cut.

• A branch may close in and pinch the saw chain in the

cut, if you cut off a branch from the bottom.

Installing pruning extension on chain saw

Remove the battery cartridge from the chain saw and take

out a hex wrench from the switch rod provided on the

pruning extension. Remove the switch rod with the hex

wrench. (Fig. 4 & 5)

Insert the pruning extension into the chain saw by sliding

it down from the top. (Fig. 6)

Insert the switch rod into the hole near to the switch

trigger of the chain saw. Press the lock-off button and with

the lock-off button pressed insert the switch rod in the

space in the outer case and secure it with a bolt using the

hex wrench. (Fig. 7 & 8)

Secure it at the back of the outer case as well with

another bolt. (Fig. 8)

Return the hex wrench onto the switch rod after use.

Switch action (Fig. 9)

CAUTION:

Before inserting the battery cartridge into the pruning

extension, always check to see that the switch trigger

actuates properly and returns to the “OFF” position when

released.

To prevent the switch trigger from being accidently pulled,

a lock-off button is provided. To start the tool, depress the

lock-off button and pull the switch trigger. Release the

switch trigger to stop.

Extension of shaft

Hold the joint firmly and turn the lock ring

counterclockwise to loosen it. Then extend the shaft to the

desired length. (Fig. 10)

To secure the shaft, first align both arrows indicated on

the joint and the connector. Then turn the lock ring

clockwise. (Fig. 11)

OPERATION (Fig. 12)

Always wear safety goggles and safety helmet. To avoid

the risk of injury from falling branches, never stand directly

under the branch being cut.

For improved control, when operating the chain saw with

the pruning extension handle, be sure to grasp only the

rubber surfaces of the pruning extension handle.

When not in use, store bolts and switch rod in place in the

pruning extension handle.

1. Battery cartridge

2. Button

3. Hex wrench

4. Connector of pruning extension

5. Lock-off button

6. Switch rod

7. Hex bolts

8. Switch trigger

9. Loosen

10. Thinner shaft

11. Lock ring

12. Joint

13. Arrow

14. Tighten

15. Arrow

16. Chain saw (BUC121/BUC122)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita 194523 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info