Bedienungsanleitung Makita 4131 (Seite 5 von 18) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Norwegisch)

110254

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

ENGLISH

Explanation of general view

1Lever

2 Depth guide

3 Cutting line

4 Switch trigger

5 Lock-off button

6 Dust cover

7Knob

8Hex wrench

9 Shaft lock

10 Hex socket head bolt

11 Outer flange

12 Carbide-tipped saw blade

13 Inner flange

14 Slot

15 Rib

16 Rip fence (Guide rule)

17 Screw

18 Workpiece

19 Sight window

20 Retracting lever

21 Limit mark

22 Screwdriver

23 Brush holder cap

SPECIFICATION

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

Intended use

The tool is intended for cutting in mild steel.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

Safety hints

For your own safety, please refer to the enclosed safety

instructions.

ADDITIONAL SAFETY RULES FOR TOOL

ENB082-3

DANGER:

1. Keep hands away from cutting area and the

blade. Keep your second hand on auxiliary han-

dle, or motor housing. If both hands are holding

the tool, they cannot be cut by blade.

2. Do not reach underneath the workpiece. The

guard cannot protect you from the blade below the

workpiece.

3. Adjust the cutting depth to the thickness of the

workpiece. Less than a full tooth of the blade teeth

should be visible below the workpiece.

4. Never hold piece being cut in your hands or

across your leg. Secure the workpiece to a sta-

ble platform. It is important to support the work

properly to minimize body exposure, blade binding,

or loss of control.

5. Hold power tool by insulated gripping surfaces

when performing an operation where the cutting

tool may contact hidden wiring or its own cord.

Contact with a “live” wire will also make exposed

metal parts of the power tool “live” and shock the

operator.

6. When ripping always use a rip fence or straight

edge guide. This improves the accuracy of cut and

reduces the chance of blade binding.

7. Always use blades with correct size and shape

(diamond versus round) of arbour holes. Blades

that do not match the mounting hardware of the tool

will run eccentrically, causing loss of control.

8. Never use damaged or incorrect blade washers

or bolt. The blade washers and bolt were specially

designed for your tool, for optimum performance and

safety of operation.

9. Causes and operator prevention of kickback;

• Kickback is a sudden reaction to a pinched,

bound or misaligned saw blade, causing an

uncontrolled tool to lift up and out of the work-

piece toward the operator.

• When the blade is pinched or bound tightly by

the kerf closing down, the blade stalls and the

motor reaction drives the unit rapidly back

toward the operator.

• If the blade becomes twisted or misaligned in

the cut, the teeth at the back edge of the blade

can dig into the top surface of the workpiece

causing the blade to climb out of the kerf and

jump back toward the operator.

Model 4131

Balde diameter 185 mm

Max. cutting capacity 63 mm

No load speed (min

–1

)3,500

Overall length 358 mm

Net weight 4.8 kg

Safety class /II

A typical illustration of proper hand support,

workpiece support, and supply cord routing

(if applicable).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita 4131 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info