Bedienungsanleitung Makita 6841R (Seite 4 von 36) (Deutsch, Englisch, Polnisch)

690977

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

ENGLISH (Original instructions)

Explanation of general view

1-1. Lock button

1-2. Switch trigger

2-1. Reversing switch lever

3-1. Hook

3-2. Clamping screw

4-1. Casing

4-2. Thumb screw

5-1. Plane bearing

5-2. Dust cover

5-3. Bit

6-1. Lever

6-2. Stopper base

6-3. Plate

6-4. Casing

8-1. Lock lever

8-2. Magazine cap

9-1. Screw strip

9-2. Magazine

10-1. Slotted passage

11-1. Lock lever

11-2. Magazine cap

12-1. Portion A

13-1. Screw-driving position

15-1. Reverse lever

16-1. Protrusion (A)

17-1. Extension handle

19-1. Limit mark

20-1. Brush holder cap

20-2. Screwdriver

SPECIFICATIONS

Model 6841R

Screw strip 4 mm x 25 mm - 41 mm

No load speed (min

-1

) 6,000

Overall length 333 mm

Net weight 2.0 kg

Safety class /II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

ENE033-1

Intended use

The tool is intended for screw driving in wood, metal and

plastic.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated and can, therefore, also be used from

sockets without earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

) : 83 dB(A)

Sound power level (L

) : 94 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Work mode: screwdriving without impact

Vibration emission (a

) : 2.5 m/s

or less

Uncertainty (K) : 1.5 m/s

ENG901-1

•

The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-15

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine:

Auto Feed Screwdriver

Model No./ Type: 6841R

are of series production and

Conforms to the following European Directives:

2006/42/EC

And are manufactured in accordance with the following

standards or standardised documents:

EN60745

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita 6841R Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info