Bedienungsanleitung Makita 6904VH (Seite 3 von 64) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

690978

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

ENGLISH

Explanation of general view

1 O-ring

2 Socket

3 Pin

4 Switch trigger

5 Clockwise

6 Counterclockwise

7 Reversing switch

8 Speed change lever

SPECIFICATIONS

Model 6904VH 6905H

Capacities

Standard bolt ................................................................................. M10 – M16 M12 – M20

High tensile bolt ............................................................................ M10 – M12 M12 – M16

Wood screw ........................................................................ 6.0 mm x 100 mm ——

Self-drilling screw ................................................................................ 6.0 mm ——

Square drive ...................................................................................... 12.7 mm 12.7 mm

Impacts per minute ................................................................... High:0–3,000 2,600

Low:0–2,500

No load speed (RPM) ............................................................... High:0–2,400 2,200

Low:0–2,100

Fastening torque .................................................................. High : 2,000 kg

cm 3,000 kg

Low : 1,500 kg

Overall length ........................................................................................ 265 mm 275 mm

Net weight ................................................................................................ 1.8 kg 2.3 kg

•

Due to the continuing program of research and

development, the specifications herein are subject

to change without prior notice.

•

Note: Specifications may differ from country to

country.

Power supply

The machine should be connected only to a power

supply of the same voltage as indicated on the

nameplate, and can only be operated on single-phase

AC supply. They are double-insulated in accordance

with European Standard and can, therefore, also be

used from sockets without earth wire.

Safety hints

For your own safety, please refer to enclosed safety

instructions.

These symbols mean:

Read instruction manual.

DOUBLE INSULATION

ADDITIONAL SAFETY RULES

1. Wear ear protectors.

2. Check the socket carefully for wear, cracks or

damage before installation.

3. Hold the machine firmly.

4. Always be sure you have a firm footing. Be

sure no one is below when using the machine

in high locations.

5. The proper fastening torque may differ

depending upon the kind or size of the bolt.

Check the torque with a torque wrench.

6. When driving into walls, floors or wherever

‘‘live’’electrical wires may be encountered, DO

NOT TOUCH ANY METAL PARTS OF THE

MACHINE! Hold the machine only by the insu-

lated grasping surfaces to prevent electric

shock if you drive into a ‘‘live’’ wire.

SAVE THESE INSTRUCTIONS.

OPERATING INSTRUCTIONS

Selecting correct socket

Always use the correct size socket for bolts and nuts.

An incorrect size socket will result in inaccurate and

inconsistent fastening torque and/or damage to the

bolt or nut.

Installing or removing socket (Fig. 1)

Important:

Always be sure that the machine is switched off and

unplugged before installing or removing the socket.

Move the O-ring out of the groove in the socket and

remove the pin from the socket. Fit the socket onto

the anvil of the machine so that the hole in the socket

is aligned with the hole in the anvil. Insert the pin

through the hole in the socket and anvil. The return

the O-ring to the original position in the socket groove

to retain the pin. To remove the socket, follow the

installation procedures in reverse.

Switch action (Fig. 2)

CAUTION:

Before plugging in the machine, always check to see

that the switch trigger actuates properly and returns to

the ‘‘OFF’’ position when released.

For 6904VH

To start the machine, simply pull the trigger. Machine

speed is increased by increasing pressure on the

trigger. Release the trigger to stop.

For 6905H

To start the machine, simply pull the trigger. Release

the trigger to stop.

6904VH/6905H (Eng) (’97. 4. 7)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita 6904VH Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info