Bedienungsanleitung Makita AN901 (Seite 5 von 60) (Deutsch, Englisch, Polnisch)

601100

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

ENH003-13

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine:

Construction Coil Nailer

Model No./ Type: AN901

are of series production and

Conforms to the following European Directives:

2006/42/EC

And are manufactured in accordance with the following

standards or standardised documents:

EN792

The technical documentation is kept by our authorised

representative in Europe who is:

Makita International Europe Ltd.

Michigan Drive, Tongwell,

Milton Keynes, Bucks MK15 8JD, England

30.1.2009

000230

Tomoyasu Kato

Director

Makita Corporation

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, 446-8502, JAPAN

ENB067-3

IMPORTANT SAFETY

INSTRUCTIONS

WARNING: WHEN USING THIS TOOL, BASIC

SAFETY PRECAUTIONS SHOULD ALWAYS BE

FOLLOWED TO REDUCE THE RISK OF PERSONAL

INJURY, INCLUDING THE FOLLOWING:

READ ALL INSTRUCTIONS.

• For personal safety and proper operation and

maintenance of the tool, read this instruction

manual before using the tool.

• Always wear safety glasses to protect your eyes

from dust or nail injury.

WARNING: It is an employer's responsibility to

enforce the use of safety eye protection equipment

by the tool operators and by other persons in the

immediate working area.

• For Australia and New Zealand only

Always wear safety glasses and face shield to

protect your eyes from dust or nail injury. The safety

glasses and the face shield should conform with the

requirements of AS/NZS 1336.

WARNING: It is an employer's responsibility to

enforce the use of safety eye protection equipment

by the tool operators and by other persons in the

immediate working area.

Safety glasses

Face shield

000114

•

Wear hearing protection to protect your ears against

exhaust noise and head protection. Also wear light

but not loose clothing. Sleeves should be buttoned

or rolled up. No necktie should be worn.

• Rushing the job or forcing the tool is dangerous.

Handle the tool carefully. Do not operate when

under the influence of alcohol, drugs or the like.

• General Tool Handling Guidelines:

(1) Always assume that the tool contains

fasteners.

(2) Do not point the tool toward yourself or

anyone whether it contains fasteners or not.

(3) Do not activate the tool unless the tool is

placed firmly against the workpiece.

(4) Respect the tool as a working implement.

(5) No horseplay.

(6) Do not hold or carry the tool with a finger on

the trigger.

(7) Do not load the tool with fasteners when any

one of the operating controls is activated.

(8) Do not operate the tool with any power source

other than that specified in the tool

operating/safety instructions.

• An improperly functioning tool must not be used.

•

Sparks sometimes fly when the tool is used. Do not

use the tool near volatile, flammable materials such

as gasoline, thinner, paint, gas, adhesives, etc.;

they will ignite and explode, causing serious injury.

• The area should be sufficiently illuminated to

assure safe operations. The area should be clear

and litter-free. Be especially careful to maintain

good footing and balance.

• Only those involved in the work should be in the

vicinity. Children especially must be kept away at all

times.

• There may be local regulations concerning noise

which must be complied with by keeping noise

levels within prescribed limits. In certain cases,

shutters should be used to contain noise.

• Do not play with the contact element: it prevents

accidental discharge, so it must be kept on and not

removed. Securing the trigger in the ON position is

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita AN901 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info